تجارب الأعضاء الناجحة على واجهة UMT Dongle

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Condor G4 Format FS


201118015113902578.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

STREAM B2 Plus Format FS + Reset FRP



Format FS

201206095119905425.png


كود:
[B]Operation : Format FS
CPU : MT6737M
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : STREAM
Manufacturer : EastAeon
Model : HT28
Prod. Name : B2Plus
Device : B2Plus
Android Ver. : 8.1.0
Display ID : HB45B2Plus.DZ.V10.0.0.2018.11.22
Patch Level : 2018-10-05
Userdata is ENCRYPTED
[COLOR="#FF0000"]Formatting userdata...
- Done.[/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.4][/B]

Reset FRP

201206095120360926.png


كود:
[B]Operation : Reset FRP
CPU : MT6737M
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : STREAM
Manufacturer : EastAeon
Model : HT28
Prod. Name : B2Plus
Device : B2Plus
Android Ver. : 8.1.0
Display ID : HB45B2Plus.DZ.V10.0.0.2018.11.22
Patch Level : 2018-10-05
Userdata is ENCRYPTED
[COLOR="#FF0000"]Resetting FRP...
FRP Reset Done.[/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.4][/B]
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Reset FRP
Redmi Note 8T
up4net-FRP.png
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Repair Dead Boot ( Lenovo S90 Platinum) ) S90-A
up4net-64.png
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,950
النقاط
113
HUAWEI Y7 Prime 2019 (DUB-LX1) Flash done

HUAWEI Y7 Prime 2019 (DUB-LX1) Flash done

201214105249225951.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO A31 (CPH2015) Pinlock remove

by UMT EMMC Tool



160819963508142.png



كود:
[B]Opening Device...Done
Physical Details:
Chip Size : 0x1D1F000000 [116.48 GB]
Sector Size : 0x0200
Sector Count : 0x0E8F8000
Reading Partition Data...OK
Header Rev. : 0x00010000
Header Size : 0x5C
Header CRC : 0x9C708FEC
Current LBA : 0x00000001
Backup LBA : 0x0E8F7FFF
First LBA : 0x00000022
Last LBA : 0x0E8F7FDE
PIT Entry Size : 0x80
Disk GUID : 00000000000000000000000000000000
Sector Size : 0x0200
Parsing Partition Entries...OK
Part Count : 44
Reading Device Information...OK
Device : OPPO
Android Ver. : 9
Patch Level : 2020-06-05
Formatting Userdata in Safe Mode...Done
Turn on device to finalize operation.
Operation Finished.[/B]
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Reset (FRP) BY UMT

Starlight Future
up4net-2020-12-19-222224.png


Starlight My_Star_X
up4net-2020-12-19-220519.png


Iris VOX_FORTIS
up4net-2020-12-19-221840.png
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,950
النقاط
113
Condor TGW 710G Read Pattern

Condor TGW 710G Read Pattern

201226043851618688.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Oppo F1s Format FS


160906708287341.png


كود:
[B]Brand : Oppo
Model : F1s
Operation : Format FS
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM17)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM16)
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : OPPO
Manufacturer : OPPO
Model : A1601
Prod. Name : A1601
Device : A1601
Board : full_oppo6750_15331
Platform : mt6750
Android Ver. : 5.1
Display ID : A1601EX_11_A.33_170814
Patch Level : 2017-08-05
Userdata is NOT ENCRYPTED
Formatting userdata...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.4][/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Lenovo A319 Flash



160907345006461.png
 
التعديل الأخير:

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO R9S Format Userdata and Reset FRP



160916605755221.png


كود:
[B][FONT=Arial Black][SIZE=2]Device	: Oppo R9s
Operation	: Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM14)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1600400 [8953] 00000000
OPK_DATA	: C00D890AAF48CA22BF581579142E7466BC762BAB0F1A4B23BFA1C9BB8B49C5FD
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_008]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8953, EMMC, 64 GB
LU Count	: 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: OPPO OPPO R9s [msm8953] [R9s]
Brand	: OPPO
Prod.Name	: R9s
Software	: R9s_11_A.14_170521, 300 [Sun May 21 03:16:17 CST 2017]
Android Ver.	: 6.0.1
Patch Level	: 2017-04-05
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.4[/SIZE][/FONT][/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Huawei Y7 Prime (DUB-LX1) Reset FRP


160923201466731.png


كود:
[B][FONT=Arial Black][SIZE=2]Device : Huawei Y7 Prime (DUB-LX1)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM14)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 65001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D 15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_030]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : unknown
Software : System 8.2.0.036(04XV) [Fri May 10 12:57:40 CST 2019]
Android Ver. : 8.1.0
Patch Level : 2019-05-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 6.4[/SIZE][/FONT][/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO A57 (CPH1701) Format FS

160974791416451.png


كود:
[B][FONT=Arial Black][SIZE=2] Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM18)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27 277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO CPH1701 [msm8937] [CPH1701]
Software : CPH1701EX_11_A.31_171214, eng.root.20171214.113651 [Thu Dec 14 11:25:12 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-12-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.4 [/SIZE][/FONT][/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Xiaomi Redmi 4X Reset Mi Account


160975283191211.png


كود:
[B][FONT=Arial Black][SIZE=2]Device	: Xiaomi Redmi 4x
Operation	: Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_003.ufl]...Done
Executing Loader...OK
Hardware* : 8937, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4X [msm8937] [santoni]
Software : N2G47H, V10.1.1.0.NAMMIFI [Mon Oct 14 10:36:39 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-10-01
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 6.4[/SIZE][/FONT][/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Xiaomi Redmi 3S Reset Mi Account


160984432294961.png


كود:
[B][FONT=Arial Black][SIZE=2]Device : Xiaomi Redmi 3s
Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM30)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 3S [msm8937]
Brand : Xiaomi
Prod.Name : land
Software : MMB29M, V10.2.2.0.MALMIXM [Tue Apr 23 13:46:50 WIB 2017]
Android Ver. : 6.0.1
Patch Level : 2017-04-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 6.4[/SIZE][/FONT][/B]
 
التعديل الأخير:

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Xiaomi Mi A1 Format FS

161052961136741.png


كود:
[B][FONT=Arial Black][SIZE=2]Device	: Xiaomi Mi A1
Operation	: Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM32)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Mi A1
Software : PKQ1.180917.001.V10.0.14.0.PDHMIXM, V10.0.14.0.PDHMIXM [Mon Oct 28 14:32:54 WIB 2019]
Android Ver. : 9
Patch Level : 2019-10-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.4
[/SIZE][/FONT][/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Samsung Galaxy A3 2016 (SM-A310F) FRP Reset


161096357992551.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO A5 (CPH1809) Remove Password
ISP UltimateEMMC Tool




161104861135121.png


161104766340311.png


كود:
[B]Physical Details:
Chip Size : 0x747C00000 [29.12 GB]
Sector Size : 0x0200
Sector Count : 0x03A3E000
Reading Partition Data...OK
Header Rev. : 0x00010000
Header Size : 0x5C
Header CRC : 0x0732C48E
Current LBA : 0x00000001
Backup LBA : 0x03A3DFFF
First LBA : 0x00000022
Last LBA : 0x03A3DFDE
PIT Entry Size : 0x80
Disk GUID : 332E5013A054880008E2603300008F12
Sector Size : 0x0200
Parsing Partition Entries...OK
Part Count : 66
Reading Device Information...OK
Device : OPPO
Android Ver. : 8.1.0
Patch Level : 2019-12-05
Formatting Userdata in Safe Mode...Done
Turn on device to finalize operation.
Operation Finished.[/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO A3S CPH1803 Password Unlock



161114061479321.png


كود:
[B][FONT=Arial Black][SIZE=2]Opening Device...Done
Physical Details:
Chip Size : 0x747C00000 [29.12 GB]
Sector Size : 0x0200
Sector Count : 0x03A3E000
Reading Partition Data...OK
Header Rev. : 0x00010000
Header Size : 0x5C
Header CRC : 0xCC8040FC
Current LBA : 0x00000001
Backup LBA : 0x03A3DFFF
First LBA : 0x00000022
Last LBA : 0x03A3DFDE
PIT Entry Size : 0x80
Disk GUID : 00000000000000000000000000000000
Sector Size : 0x0200
Parsing Partition Entries...OK
Part Count : 67
Reading Device Information...OK
Device : OPPO
Android Ver. : 8.1.0
Patch Level : 2020-01-05
Formatting Userdata in Safe Mode...Done
Turn on device to finalize operation.
Resetting FRP...Done
Operation Finished.[/SIZE][/FONT][/B]
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Huawei P20 lite (ANE-LX1) Reset FRP



16113959499231.png


كود:
[B][FONT=Arial Black][SIZE=2][COLOR="#FF0000"]Operation	: Reset FRP[/COLOR]
Searching for COM1.0 Device...Found!
COM42	: HUAWEI USB COM 1.0 (COM42)
Opening Port...OK
Sending Loader [XLOADER]...OK
Sending Loader [FASTBOOT]...OK
Searching for Device in FastBoot Mode...OK
[COLOR="#FF0000"]Model	: ANE-LX1
Build	: ANE-LX1 9.1.0.132(C432E5R1P7)  
BL Status	: Unlocked
User Status	: Locked
[/COLOR]Serial	: 8MXXXXXXXXXXXX30
IMEI1	: 86368XXXXXXXXXX
IMEI2	: 86368XXXXXXXXXX
MEID	: 00000000000000
[COLOR="#008000"]Resetting FRP...Done
Device will reboot and wipe.
[/COLOR]Operation Finished.
UltimateHST v0.1
[/SIZE][/FONT][/B]
 
أعلى