تجارب الأعضاء الناجحة على واجهة UMT Dongle

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO A3S Pinlock Remove


161175446575171.png


كود:
[B][FONT=Arial Black][SIZE=2]Opening Device...Done
Physical Details:
Chip Size : 0x747C00000 [29.12 GB]
Sector Size : 0x0200
Sector Count : 0x03A3E000
Reading Partition Data...OK
Header Rev. : 0x00010000
Header Size : 0x5C
Header CRC : 0x01A4E000
Current LBA : 0x00000001
Backup LBA : 0x03A3DFFF
First LBA : 0x00000022
Last LBA : 0x0CA32FDE
PIT Entry Size : 0x80
Disk GUID : 3222B424E6BB884AB44266D00E122842
Sector Size : 0x0200
Parsing Partition Entries...OK
Part Count : 67
[COLOR="#0000FF"]Reading Device Information...OK
Device : OPPO
Android Ver. : 8.1.0
Patch Level : 2020-07-05
[COLOR="#008000"][/COLOR]Formatting Userdata in Safe Mode...Done
Turn on device to finalize operation.
Resetting FRP...Done
[/COLOR]Operation Finished.
[/SIZE][/FONT][/B]
 
التعديل الأخير:

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

LG K7 x210ds Read Pattern

161286724838361.png


كود:
[B][FONT=Arial Black][SIZE=2]Brand : LG
Model : X210
Operation : Read Info
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM17)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM16)
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : lge
Manufacturer : LG Electronics
Model : LG-X210
Prod. Name : m13g_global_com
Device : m13g
Platform : mt6580
Android Ver. : 5.1
Patch Level : 2017-02-05
Userdata is NOT ENCRYPTED
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.5]
[/SIZE][/FONT][/B]

161286741153741.png


كود:
[B][FONT=Arial Black][SIZE=2]Brand : LG
Model : X210
Operation : Read Pattern
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM17)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM16)
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : lge
Manufacturer : LG Electronics
Model : LG-X210
Prod. Name : m13g_global_com
Device : m13g
Platform : mt6580
Android Ver. : 5.1
Patch Level : 2017-02-05
Userdata is NOT ENCRYPTED
[COLOR="#FF0000"]Reading Pattern Lock...
Pattern: 14789632
Read Pattern Done.
[/COLOR]Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.5]
[/SIZE][/FONT][/B]
 

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

samsung j700t frp reset
p_1867n2rr61.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO A3S (CPH1803) Pattern Unlock


BY UMT EMMC TOOL



16130333557471.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Oppo A1K Factory Reset (MetaMode)



161338092096361.png


كود:
[B][FONT=Arial Black][SIZE=2]
[COLOR="#FF0000"]Operation : Oppo/Realme Factory Reset (Meta)
[/COLOR]Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Found MediaTek USB Port_V1633 (COM17) on COM17
Device Path : \\?\usb#vid_1a6d&pid_0003#5&2a2b26f7&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Mode : BROM
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek PreLoader USB VCOM_V1633 (Android) (COM16) on COM16
Device Path : \\?\usb#vid_22d9&pid_0006#5&2a2b26f7&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Configuring Communication Channel...
[COLOR="#008000"]Reading phone information...
CPU : MT6765
SW Ver. : MOLY.LR12A.R2.PIE.P22.PR3.TC16.SP.V1.P4
HW Ver. : OPPO_P0MP3_K62V1_64_BSP_HW
[/COLOR]Starting Safe Factory Reset...
[COLOR="#FF8C00"]Reset success
[/COLOR]Operation finished
[UltimateMTK Ver. 3.6]


[/SIZE][/FONT][/B]
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
Starlight Star Plus Plus FRP Reset

Starlight Star Plus Plus FRP Reset

210215103948769823.png
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
Lenovo Vibe B A2016a40 Factory Reset

Lenovo Vibe B A2016a40 Factory Reset

210220094915554008.png
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
ILA C3 FRP Reset

ILA C3 FRP Reset

210225061734379410.png
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
Starlight Star Mix 2 FRP Reset

Starlight Star Mix 2 FRP Reset

210225062620768318.png


 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
Condor Plume P8 (PGN605) Read Pattern

Condor Plume P8 (PGN605) Read Pattern

210227032055991240.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Oppo A1K Factory Reset (MetaMode)




161450822501961.png
 

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,591
مستوى التفاعل
1,789
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Oppo F9 CPH1823 Factory Reset



161503411535311.png



210306014643141810.png
 

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Huawei GR5 BLL-L22 Remove FRP

p_1893spsm01.png
 

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

REDMI NOTE 8 RESET FRP[/B
p_190085mct1.png
]
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
Huawei Y7 Prime 2019 DUB-LX1 FRP By Test point

Huawei Y7 Prime 2019 DUB-LX1 FRP By Test point

fcc045cf5bc34de19896eaf4e4c05710ce16ef09.jpg


210317072150202206.png


كود:
Device    : [COLOR=#0000ff]Huawei Y7 Prime (DUB-LX1)[/COLOR]Operation    : Reset FRP
Checking for existing devices...Found
[COLOR=#ff0000]Port    : Qualcomm HS-USB QDLoader 9008 (COM9)[/COLOR]
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1A00900 [8953] 65001500
OPK_DATA    : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_030]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, EMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : unknown
Software    : System 8.2.0.036(1UWB) [Mon Feb  8 18:27:38 CST 2021]
Android Ver.    : 8.1.0
Patch Level    : 2020-09-01
[COLOR=#ff0000]Resetting FRP Lock.......Done[/COLOR]
Operation Finished.
QcFire Ver. 6.6
 

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

فك unlock modem 4g lte b310s-927



p_1912yap0r1.png
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
XIAOMI REDMI GO Flashing + FRP Reset By Test Point

XIAOMI REDMI GO Flashing + FRP Reset By Test Point

REDMI%2BGO.jpg


210402062811723321.png


كود:
Operation	: Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1600500 [8917] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8917, EMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [cmnlib_30.mbn] -> [cmnlib] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64] ...Done
Writing [keymaster64.mbn] -> [keymaster] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [cmnlib_30.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster64.mbn] -> [keymasterbak] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [persist.img ] -> [persist]...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [vendor.img ] -> [vendor]...Done
Writing [system.img ] -> [system]...Done
Writing [cache.img ] -> [cache]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 6.6


210402062935281666.png


كود:
Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1600500 [8917] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8917, EMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Go [tiare]
Brand	: Xiaomi
Prod.Name	: tiare_in
Software	: OPM1.171019.026.V10.2.19.0.OCLINXM, V10.2.19.0.OCLINXM [Sun Feb  7 13:45:46 WIB 2021]
Android Ver.	: 8.1.0
Patch Level	: 2021-01-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.6
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
Oppo A93 (CPH2121) Factory Reset (exclusive)

Oppo A93 (CPH2121) Factory Reset (exclusive)


21040407445988810.png
كود:
Operation : Oppo/Realme Factory Reset (Meta)Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Make sure to leave Buttons as soon as phone is detected.
Found MediaTek USB Port_V1633 (COM4) on COM4
Device Path : \\?\usb#vid_0e8d&pid_0003#5&21e739f&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Mode : BROM
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek PreLoader USB VCOM_V1633 (Android) (COM69) on COM69
Device Path : \\?\usb#vid_22d9&pid_0006#5&21e739f&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Configuring Communication Channel...
Reading phone information...
CPU : [COLOR=#ff0000]MT6779[/COLOR]
SW Ver. : MOLY.LR13.R1.TC16.Q.SP.V50.P4
HW Ver. : MT6779_SP_HW
Brand: OPPO
Model: [COLOR=#ff0000]CPH2121[/COLOR]
Name: [COLOR=#ff0000]OPPO A93[/COLOR]
Platform: MT6779
OEM Prod.: CPH2121
OEM Device: OP4C5F
Build Date: Tue Feb  2 00:58:46 CST 2021
Display ID: CPH2121_11_C.23
OTA Version: CPH2121NV27_11.C.23_1230_202102020029
Patch Level: 2021-02-05
Starting Safe Factory Reset (2)...
[COLOR=#0000cd]Reset Success[/COLOR]
[COLOR=#0000cd]-- Start phone in recovery using VOL DOWN + Power Button and[/COLOR]
[COLOR=#0000cd]-- Wipe data from recovery.[/COLOR]
Operation finished
If META method does not work, try Format FS in BROM mode.
[UltimateMTK Ver. 4.0]
[UltimateMTK Ver. 4.0]
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,116
مستوى التفاعل
2,952
النقاط
113
XIAOMI REDMI NOTE 8 Flash + FRP Reset

XIAOMI REDMI NOTE 8 Flash + FRP Reset


210406063249566719.png

كود:
Operation    : FlashChecking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1A01000 [SDM665] 00007200
OPK_DATA    : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : SDM665, EMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [65536], Out: 16384, Sector Size: 512
Writing [qupv3fw.elf] -> [qupfw] ...Done
Writing [qupv3fw.elf] -> [qupfwbak] ...Done
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [vbmeta.img] -> [vbmetabak] ...Done
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [xbl_config.elf] -> [xbl_configbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [abl.elf] -> [ablbak] ...Done
Writing [BTFM.bin] -> [bluetooth] ...Done
Writing [BTFM.bin] -> [bluetoothbak] ...Done
Writing [misc.img] -> [misc] ...Done
Writing [imagefv.elf] -> [imagefv] ...Done
Writing [imagefv.elf] -> [imagefvbak] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [uefi_sec.mbn] -> [uefisecappbak] ...Done
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl.elf] -> [xblbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [metadata.img ] -> [metadata]...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [dtbo.img] -> [dtbobak] ...Done
Writing [dspso.bin] -> [dsp] ...Done
Writing [dspso.bin] -> [dspbak] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [boot.img] -> [bootbak] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [NON-HLOS.bin] -> [modembak] ...Done
Writing [cust.img ] -> [cust]...Done
Writing [vendor.img ] -> [vendor]...Done
Writing [system.img ] -> [system]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 6.6
210406063248718900.png

كود:
Operation    : Reset FRPChecking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1A01000 [SDM665] 00007200
OPK_DATA    : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : SDM665, EMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi
Software    : , V12.0.3.0.QCOMIXM [Sat Dec 26 02:11:35 WIB 2020]
Android Ver.    : 10
Patch Level    : 2020-12-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 6.6
 
أعلى