مساعدة في تصليح بوت j200g/dd

sempal

عضو أساسي
إنضم
28 يونيو 2012
المشاركات
486
مستوى التفاعل
277
النقاط
63
السلام عليكم
شباب الرجاء ملف bl و pit خاص بهذا الهاتف حملت ملفين واظن انهما لايتوافقا معه انفو العملية وانفو الخطئ
Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J200G
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200G_EMMC_STARKRIMES.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H8G4t2
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID : 90014A4838473474320118A15C4915CB
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4t2
Product revision : 0.1
Product serial number : (hex) 18A15C49
Manufacturing date : 01/2018
---------------------------------------------------------------
CSD Info

CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 344064
Number of sectors : 4718592
Device Manufacturer :samsung
Device Platform :exynos3
Build ID :LMY47X
Display Build ID :LMY47X.J200GDCU2AQH3
Release ID :5.1.1
Device Model :SM-J200G
Device Name :j2ltedd
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :j2ltedd-user 5.1.1 LMY47X J200GDCU2AQH3 release-keys

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G4t2_31_08_2019_20_18_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: BOTA0 (00002000, 00002000) 4 MB
P02: BOTA1 (00004000, 00002000) 4 MB
P03: EFS (00006000, 0000A000) 20 MB
P04: CPEFS (00010000, 00004000) 8 MB
P05: m9kefs1 (00014000, 00002000) 4 MB
P06: m9kefs2 (00016000, 00002000) 4 MB
P07: m9kefs3 (00018000, 00002000) 4 MB
P08: CARRIER (0001A000, 00002000) 4 MB
P09: PARAM (0001C000, 00004000) 8 MB
P10: BOOT (00020000, 00006800) 13 MB
P11: RECOVERY (00026800, 00007800) 15 MB
P12: OTA (0002E000, 00004000) 8 MB
P13: CDMA-RADIO (00032000, 00002000) 4 MB
P14: RADIO (00034000, 00014000) 40 MB
P15: TOMBSTONES (00048000, 00002000) 4 MB
P16: TDATA (0004A000, 00002000) 4 MB
P17: PERSISTENT (0004C000, 00000800) 1024 KB
P18: PERSDATA (0004C800, 00006000) 12 MB
P19: RESERVED2 (00052800, 00001800) 3072 KB
P20: SYSTEM (00054000, 00480000) 2304 MB
P21: CACHE (004D4000, 00064000) 200 MB
P22: HIDDEN (00538000, 00014000) 40 MB
P23: USERDATA (0054C000, 00942000) 4.629 GB
 

sempal

عضو أساسي
إنضم
28 يونيو 2012
المشاركات
486
مستوى التفاعل
277
النقاط
63
رد: مساعدة في تصليح بوت j200g/dd

انفو المشكل
Selected pit file: C:/Users/fac/Desktop/SM-J200G_2016-05-15_14.48.05.pit

Open file "C:/Users/fac/Desktop/J200G-DDU1APH5_BL.tar.md5".


Writing MBR...Done.
Writing primary GPT...
ERROR[012]: Write error.
At sector 1.
Disconnected.
 

sempal

عضو أساسي
إنضم
28 يونيو 2012
المشاركات
486
مستوى التفاعل
277
النقاط
63
رد: مساعدة في تصليح بوت j200g/dd

هل من مساعد
 
أعلى