اقدم لكم فريموير تابلات benzo رقم بطاقة الام R863-RK3126C-V1.0 2018.11.29 مسحوبة بــ InfinityBox CM2RKT
info
كود:
[LEFT]Card found : 97FF0B8C , v0136
Infinity-Box RockChip Service Tool [RKT] v2.00
----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!
Wait for device ...
Device Connected!
Interface test : Passed
Machine : RK312X
Device : RK312X
ExtInfo : 4.4.2
Flash CSx : 0x00
Flash Type : 2C64643CA5 [ NAND ]
Flash Vend : NOT_IN_BASE [ 0x04 ]
Flash Size : 0x00000001CE000000 ( 7,22 GiB )
Flash Info : 8388608/16384/32/40/1
Connect Ok!
Wiping UserData ...
Wipe DATA Ok!
Done!
Elapsed: 00:00:03
----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!
Wait for device ...
Device Connected!
Interface test : Passed
Machine : RK312X
Device : RK312X
ExtInfo : 4.4.2
Flash CSx : 0x00
Flash Type : 2C64643CA5 [ NAND ]
Flash Vend : NOT_IN_BASE [ 0x04 ]
Flash Size : 0x00000001CE000000 ( 7,22 GiB )
Flash Info : 8388608/16384/32/40/1
Connect Ok!
Brand : Benzo
ProdName : GPAD-S7
ProdModel : GPAD-S7
Device : rk312x
AndroidVer: 4.4
Manufact. : Benzo
SysPatch : KTU84Q
RKTxCPU : RK312X
RKTxPRJ : GPAD-S7-Benzo-8G-20190619
DevInfo : RK312X__Benzo__Benzo__ANDR_v4.4__GPAD-S7__rk312x__GPAD-S7__GPAD-S7-Benzo-8G-20190619
Reading Flash Content ...
[Read Ok] : param.cfg
[Read Ok] : u-boot.img
[Read Ok] : misc.img
[Read Ok] : resource.raw
[Read Ok] : kernel.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : backup.img
[Read Ok] : system.img
Android Info saved!
Read finished!
Configuration : RK312X / 2C64643CA5 [ NAND ]
Firmware Size : 1168 MiB
Done!
Elapsed: 00:01:46
Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
[B][SIZE=2][COLOR="#0000FF"]Device Brand : Benzo
Device Manufact.: Benzo
Device Model : rk312x
Device CPU : RK312X
Device IntName : GPAD-S7
Device Version : 4.4
CU_SWVer : Benzo
Device Compile : 19/06/2019 11:08:33
Device Project : GPAD-S7-Benzo-8G-20190619
Device ExtInfo : GPAD-S7
[/COLOR][/SIZE][/B]
Load Ok!
----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!
Wait for device ...
Device Connected!
Interface test : Passed
Machine : RK312X
Device : RK312X
ExtInfo : 4.4.2
Flash CSx : 0x00
Flash Type : 2C64643CA5 [ NAND ]
Flash Vend : NOT_IN_BASE [ 0x04 ]
Flash Size : 0x00000001CE000000 ( 7,22 GiB )
Flash Info : 8388608/16384/32/40/1
Connect Ok!
Loading firmware
Skip IDB processing
Initialize PMT ...
PMT initialized!
Flashing : u-boot.img
Flashing : misc.img
Flashing : resource.raw
Flashing : kernel.img
Flashing : boot.img
Flashing : recovery.img
Flashing : backup.img
Flashing : system.img
Flashing finished!
Done!
Elapsed: 00:03:13
[/LEFT]تحميل الفلاشة
كود: www.dzgsm.com
بالتوفيق للجميع
