BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select diagnostic port in port settings.
5. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read EFS
Selected model: SM-A605F
Selected port: COM344 SAMSUNG Mobile USB Serial Port
Software version: 36.1
Waiting ADB device... OK
Reading phone info...
Model: SM-A605F
Android version: 8.0.0
PDA version: A605FJXU3ARI2
CSC version: A605FOJM3ARI2
Phone version: A605FNXXU3ARI3
Product code: SM-A605FZKHMID
CSC country code: Iraq
CSC sales code: MID
Phone SN: R58K9557BQX
IMEI: 352326101336918
HW version: REV0.4B
RF cal date: 2018.09.25
Chip name: SDM450
Modem board: SDM450
Security patch: 2018-10-01
Boot Warranty bit: 0
Checking Super user right... true
Reading EFS from phone... OK
Saved to D:\BST\SamsungToolPRO\backup\EFS\EFS_SM-A605F_A605FJXU3ARI2_352326101336918_R58K9557BQX_31-5-2019_20-49-1.tar
Done with Samsung Tool PRO v.36.1
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select diagnostic port in port settings.
5. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read QCN
Selected model: SM-A605F
Selected port: COM344 SAMSUNG Mobile USB Serial Port
Software version: 36.1
Reading ID... OK
Detected ID: 00000152 (Unknown)
SW version: MPSS.TA.3.0.c1-00217-8953_GEN_PACK-1.164564.0.165262.1
Reading ESN... OK
Backuping RFNV... OK
Backuping FeatureMask... OK
Backuping NV Item... OK
Backuping NV Item SIM1... OK
Backuping NV Item SIM2... OK
Backuping Provisioning Item Files... OK
Reading QCN done
Done with Samsung Tool PRO v.36.1
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select diagnostic port in port settings.
5. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read SEC
Selected model: SM-A605F
Selected port: COM344 SAMSUNG Mobile USB Serial Port
Software version: 36.1
Waiting ADB device... OK
Reading phone info...
Model: SM-A605F
Android version: 8.0.0
PDA version: A605FJXU3ARI2
CSC version: A605FOJM3ARI2
Phone version: A605FNXXU3ARI3
Product code: SM-A605FZKHMID
CSC country code: Iraq
CSC sales code: MID
Phone SN: R58K9557BQX
IMEI: 352326101336918
HW version: REV0.4B
RF cal date: 2018.09.25
Chip name: SDM450
Modem board: SDM450
Security patch: 2018-10-01
Boot Warranty bit: 0
Checking Super user right... true
Backuping MMCBLK... OK
Saved to D:\BST\SamsungToolPRO\backup\SEC\SM-A605F_31-5-2019_21-10-28_backup.tar
Done with Samsung Tool PRO v.36.1
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select diagnostic port in port settings.
5. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read EFS
Selected model: SM-A605F
Selected port: COM344 SAMSUNG Mobile USB Serial Port
Software version: 36.1
Waiting ADB device... OK
Reading phone info...
Model: SM-A605F
Android version: 8.0.0
PDA version: A605FJXU3ARI2
CSC version: A605FOJM3ARI2
Phone version: A605FNXXU3ARI3
Product code: SM-A605FZKHMID
CSC country code: Iraq
CSC sales code: MID
Phone SN: R58K9557BQX
IMEI: 352326101336918
HW version: REV0.4B
RF cal date: 2018.09.25
Chip name: SDM450
Modem board: SDM450
Security patch: 2018-10-01
Boot Warranty bit: 0
Checking Super user right... true
Reading EFS from phone... OK
Saved to D:\BST\SamsungToolPRO\backup\EFS\EFS_SM-A605F_A605FJXU3ARI2_352326101336918_R58K9557BQX_31-5-2019_20-49-1.tar
Done with Samsung Tool PRO v.36.1
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select diagnostic port in port settings.
5. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read QCN
Selected model: SM-A605F
Selected port: COM344 SAMSUNG Mobile USB Serial Port
Software version: 36.1
Reading ID... OK
Detected ID: 00000152 (Unknown)
SW version: MPSS.TA.3.0.c1-00217-8953_GEN_PACK-1.164564.0.165262.1
Reading ESN... OK
Backuping RFNV... OK
Backuping FeatureMask... OK
Backuping NV Item... OK
Backuping NV Item SIM1... OK
Backuping NV Item SIM2... OK
Backuping Provisioning Item Files... OK
Reading QCN done
Done with Samsung Tool PRO v.36.1
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select diagnostic port in port settings.
5. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read SEC
Selected model: SM-A605F
Selected port: COM344 SAMSUNG Mobile USB Serial Port
Software version: 36.1
Waiting ADB device... OK
Reading phone info...
Model: SM-A605F
Android version: 8.0.0
PDA version: A605FJXU3ARI2
CSC version: A605FOJM3ARI2
Phone version: A605FNXXU3ARI3
Product code: SM-A605FZKHMID
CSC country code: Iraq
CSC sales code: MID
Phone SN: R58K9557BQX
IMEI: 352326101336918
HW version: REV0.4B
RF cal date: 2018.09.25
Chip name: SDM450
Modem board: SDM450
Security patch: 2018-10-01
Boot Warranty bit: 0
Checking Super user right... true
Backuping MMCBLK... OK
Saved to D:\BST\SamsungToolPRO\backup\SEC\SM-A605F_31-5-2019_21-10-28_backup.tar
Done with Samsung Tool PRO v.36.1