InfinityBox_install_CM2MT2_v2.06

[andi-gsm]

تم انزال تحديث جديد
http://dl1.infinity-box.com/00/pub.php?dir=software/

الهاتف يعيد الاشتعال تالقائي بعد كل عملية --- خاصية nck-----
أول عملية به
Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8C00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6572
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 53000115303055356C14024D2F60606E
DAInf: 4 : 2 : 136
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 15010053355530304D02146C6E60602F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : S5U00M
EMMC:
BOOT1 : 0x00200000 [ 2,00 MB ]
BOOT2 : 0x00200000 [ 2,00 MB ]
RPMB : 0x00020000 [ 128,00 KB ]
USER : 0xE9000000 [ 3,64 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x20000000 [ 512,00 MB ]

CHIP : MT6572 , SBID : 0x8C00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 777992BA50FB6A118A3663C995242236

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : JDQ39
Display ID : ALPS.JB3.MP.V1
Ver. CodeName : REL
Ver. Release : 4.4.4
Build Time : 1493796707
Product Model : SM-G530F
Product Brand : samsung
Product Name : SM-G530F
Product Device : SM-G530F
Product Board : SM-G530F
Product Manfct : SM-G530F
Product Info : SM-G530F

USERDATA : PLAIN ( NOT encrypted )

NVRAM check : Failed! NVRAM empty!

Done!
Elapsed: 00:00:26

 

[hassan GSM]

الجديد في التحديث

Infinity Chinese Miracle-2 MTK/Mediatek v2.06 - AutomaticBoot selection and other stuff

To use this software Smart-Card firmware version should be 0137 or higher.

Base:
Base - Secure boot - Automatic boot selection feature released
Base - Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
Base - Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
Base - Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
Base - Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )

Base - ModelBD - Manual Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use

Base - ModelBD - Automatic Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )

Base - FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
Base - FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable

FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised
FWFlasher - MT6771/6765 support revised

FWReader:
FWReader - More types supported for safe read
FWReader - Info reading improved
FWReader - packing revised
FWReader - more accurate data verification

Service:
Service - Format FS revised
Service - NVRAM module updated

Platform:
Platform - MT6765/MT6762 support optimized

Loaders:
LoaderDB - Lot of new agents included (Tecno, Tesla, Wiko and other)
LoaderDB - Included MT6570 "DRAM Fixed" agents used to revive devices flashed with wrong preloader ( so called "Doogee X10 bug" )

Other:
Other - Many different small changes and fixes
Other - SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - Preloader tools, Preloader init and other related stuff updated
Other - Partial LEGACY NAND support - optimized boot. Identify work complete if BMT autoset work correct

Info: Automatic Boot option can be switched off/on in settings menu
Info: Automatic Boot work in "SelfLearning" mode - once learned it will boot this type/device line after automatically
Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings - learn all of them !
Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things - use INFINITY ones !

حسب ما جاء في التحديث تم حل مشكل تفليش الهاتف الميت Doogee X10

 

[andi-gsm]

فيما يخص doogee x10 الفضل و كل الفضل يعود للأخ hamid28120 في هذا الموضوع https://www.dzgsm.com/vb/threads/69746-doogee-x10/ و لكن أحد الأخوة قام برفع الملف و لم يذكر حتى المصدر
و حاليا راهو يقاسم الأنجاز في gsmhosting ولم يذكر حتى المصدر
---------- بالتوفيق للمجتهدين -----------