تصليح بوت repair boot LG K8_K350z

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,669
مستوى التفاعل
2,934
النقاط
113
الإقامة
Ghardaïa


بفضل الله تم التوصل الى نقاط ريبير LG K8_K350z" EMMC" دون نزعها
مع العلم ان النفطة cmd يجب حكها قليلا


كود:
[LEFT]Welcome to Medusa Pro Software version 1.7.6. 
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: FT SCR2000 3
Reader #4: Generic EMV Smartcard Reader 0
Reader #5: Generic EMV Smartcard Reader 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Hynix eMMC H8G1e
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 90014A4838473165050802E3F4618309
Manufacturer ID       : 0X90
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X4A
Product name          : H8G1e
Product revision      : 0.8
Product serial number : (hex) 2E3F461
Manufacturing date    : 08/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size       : d2000000 bytes
Device sector size    : 512 bytes
Partition offset      : 786432
Number of sectors     : 5668864
Device Manufacturer   :lge
Device Platform       :mt6735
Build ID              :MRA58K
Display Build ID      :MRA58K
Release ID            :6.0
Device Model          :LG-K350
Device Name           :mm1v_global_com
Architecture ABI      :armeabi-v7a
Architecture ABI2     :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description     :mm1v_global_com-user 6.0 MRA58K 162010015035f release-keys

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G1e_31_03_2019_10_15_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: misc2            (00001C00, 00004000)	8 MB
P03: ftm              (00005C00, 00004000)	8 MB
P04: nvram            (00009C00, 00002800)	5 MB
P05: protect1         (0000C400, 00005000)	10 MB
P06: protect2         (00011400, 00005000)	10 MB
P07: lk               (00016400, 00001000)	2048 KB
P08: lkbak            (00017400, 00001000)	2048 KB
P09: laf              (00018400, 0000E000)	28 MB
P10: para             (00026400, 00000400)	512 KB
P11: boot             (00026800, 00008000)	16 MB
P12: recovery         (0002E800, 00008000)	16 MB
P13: recoverybak      (00036800, 00008000)	16 MB
P14: logo             (0003E800, 00004000)	8 MB
P15: lo_bak_go        (00042800, 00004000)	8 MB
P16: expdb            (00046800, 00005000)	10 MB
P17: seccfg           (0004B800, 00000400)	512 KB
P18: oemkeystore      (0004BC00, 00001000)	2048 KB
P19: secro            (0004CC00, 00003000)	6 MB
P20: keystore         (0004FC00, 00004000)	8 MB
P21: tee1             (00053C00, 00002800)	5 MB
P22: tee2             (00056400, 00002800)	5 MB
P23: eksst            (00058C00, 00000400)	512 KB
P24: encrypt          (00059000, 00000400)	512 KB
P25: persist_lg       (00059400, 00004000)	8 MB
P26: mpt              (0005D400, 0000B000)	22 MB
P27: persistent       (00068400, 00001000)	2048 KB
P28: lgfota           (00069400, 00005000)	10 MB
P29: cust             (0006E400, 00019000)	50 MB
P30: rct              (00087400, 00000800)	1024 KB
P31: factory          (00087C00, 0000E000)	28 MB
P32: persist          (00095C00, 00018000)	48 MB
P33: efuse            (000ADC00, 00000400)	512 KB
P34: frp              (000AE000, 00000800)	1024 KB
P35: nvdata           (000AE800, 00011800)	35 MB
P36: system           (000C0000, 00568000)	2768 MB
P37: cache            (00628000, 00098000)	304 MB
P38: OP               (006C0000, 000B0000)	352 MB
P39: userdata         (00770000, 00717C00)	3632 MB
P40: flashinfo        (00E87C00, 00008000)	16 MB

Switched to boot area partition 1.
Added partition BOOT1 to constructor file.

Switched to boot area partition 2.
Added partition BOOT2 to constructor file.

Switched to user area.
Added partition GPT to constructor file.
Added partition proinfo to constructor file.
Added partition misc2 to constructor file.
Added partition ftm to constructor file.
Added partition nvram to constructor file.
Added partition protect1 to constructor file.
Added partition protect2 to constructor file.
Added partition lk to constructor file.
Added partition lkbak to constructor file.
Added partition laf to constructor file.
Added partition para to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition recoverybak to constructor file.
Added partition logo to constructor file.
Added partition lo_bak_go to constructor file.
Added partition expdb to constructor file.
Added partition seccfg to constructor file.
Added partition oemkeystore to constructor file.
Added partition secro to constructor file.
Added partition keystore to constructor file.
Added partition tee1 to constructor file.
Added partition tee2 to constructor file.
Added partition eksst to constructor file.
Added partition encrypt to constructor file.
Added partition persist_lg to constructor file.
Added partition mpt to constructor file.
Added partition persistent to constructor file.
Added partition lgfota to constructor file.
Added partition cust to constructor file.
Added partition rct to constructor file.
Added partition factory to constructor file.
Added partition persist to constructor file.
Added partition efuse to constructor file.
Added partition frp to constructor file.
Added partition nvdata to constructor file.
SRF "C:/Users/HOCINE/Desktop/111/LG_k8_K350.srf" has been installed successfully.
[/LEFT]

ملاحظة: هذه اول تجربة لي من هذا النوع. لدى قررت مشاركة الملف معكم




يمنع نقل الموضوع الى بذكر المصدر


باسورد مشاهدة المرفق password.txt
و في الاخير تحياتي لكم
 

MS-GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
2,440
مستوى التفاعل
679
النقاط
0
الإقامة
Oran
بارك الله فيك اخي لطرح التجربة و مشاركة ملف الربير و شكرا.
 

ALICHAIMA

:: عضو محترف ::
إنضم
6 يناير 2016
المشاركات
970
مستوى التفاعل
635
النقاط
93
الإقامة
DZGSM
p_1185k7ypo1.gif
 

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::
إنضم
19 أغسطس 2012
المشاركات
3,397
مستوى التفاعل
7,523
النقاط
113
الإقامة
EL ASSAFIA **LAGHOUAT
بارك الله فيك ومزيدا من التالق والنجاح ...........
 

hassan GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
1,876
مستوى التفاعل
1,740
النقاط
113
بارك الله فيك
 

rebainoor

:: مشرف ::, :: قسم Alcatel ::, :: قسم LG ::, :: قس
إنضم
2 يناير 2016
المشاركات
862
مستوى التفاعل
1,706
النقاط
93
الإقامة
algerie
شكرا أخي على تبادل التجربة لاكن لوغ العملية ليس تصليح البوت لاكن هو قراءة ملف تصليح البوت srf file
اذا ممكن اضافة لوغ عملية تصليح البوت و شكرا
 

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,669
مستوى التفاعل
2,934
النقاط
113
الإقامة
Ghardaïa
شكرا أخي على تبادل التجربة لاكن لوغ العملية ليس تصليح البوت لاكن هو قراءة ملف تصليح البوت srf file
اذا ممكن اضافة لوغ عملية تصليح البوت و شكرا

تم تصحيح النفطة cmd


كود:
[LEFT]Welcome to Medusa Pro Software version 1.7.6. 
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: FT SCR2000 3
Reader #4: Generic EMV Smartcard Reader 0
Reader #5: Generic EMV Smartcard Reader 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : LG
Model     : k8_K350
SRF       : C:/Users/HOCINE/Desktop/111/LG_k8_K350.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : LG
Model     : k8_K350
SRF       : C:/Users/HOCINE/Desktop/111/LG_k8_K350.srf
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : LG
Model     : k8_K350
SRF       : C:/Users/HOCINE/Desktop/111/LG_k8_K350.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Hynix eMMC H8G1e
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 90014A483847316505080E3A28DA73EB
Manufacturer ID       : 0X90
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X4A
Product name          : H8G1e
Product revision      : 0.8
Product serial number : (hex) E3A28DA
Manufacturing date    : 07/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size       : d2000000 bytes
Device sector size    : 512 bytes
Partition offset      : 786432
Number of sectors     : 5668864
Device Manufacturer   :lge
Device Platform       :mt6735
Build ID              :MRA58K
Display Build ID      :MRA58K
Release ID            :6.0
Device Model          :LG-K350
Device Name           :mm1v_global_com
Architecture ABI      :armeabi-v7a
Architecture ABI2     :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description     :mm1v_global_com-user 6.0 MRA58K 162010015035f release-keys

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G1e_31_03_2019_12_49_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: misc2            (00001C00, 00004000)	8 MB
P03: ftm              (00005C00, 00004000)	8 MB
P04: nvram            (00009C00, 00002800)	5 MB
P05: protect1         (0000C400, 00005000)	10 MB
P06: protect2         (00011400, 00005000)	10 MB
P07: lk               (00016400, 00001000)	2048 KB
P08: lkbak            (00017400, 00001000)	2048 KB
P09: laf              (00018400, 0000E000)	28 MB
P10: para             (00026400, 00000400)	512 KB
P11: boot             (00026800, 00008000)	16 MB
P12: recovery         (0002E800, 00008000)	16 MB
P13: recoverybak      (00036800, 00008000)	16 MB
P14: logo             (0003E800, 00004000)	8 MB
P15: lo_bak_go        (00042800, 00004000)	8 MB
P16: expdb            (00046800, 00005000)	10 MB
P17: seccfg           (0004B800, 00000400)	512 KB
P18: oemkeystore      (0004BC00, 00001000)	2048 KB
P19: secro            (0004CC00, 00003000)	6 MB
P20: keystore         (0004FC00, 00004000)	8 MB
P21: tee1             (00053C00, 00002800)	5 MB
P22: tee2             (00056400, 00002800)	5 MB
P23: eksst            (00058C00, 00000400)	512 KB
P24: encrypt          (00059000, 00000400)	512 KB
P25: persist_lg       (00059400, 00004000)	8 MB
P26: mpt              (0005D400, 0000B000)	22 MB
P27: persistent       (00068400, 00001000)	2048 KB
P28: lgfota           (00069400, 00005000)	10 MB
P29: cust             (0006E400, 00019000)	50 MB
P30: rct              (00087400, 00000800)	1024 KB
P31: factory          (00087C00, 0000E000)	28 MB
P32: persist          (00095C00, 00018000)	48 MB
P33: efuse            (000ADC00, 00000400)	512 KB
P34: frp              (000AE000, 00000800)	1024 KB
P35: nvdata           (000AE800, 00011800)	35 MB
P36: system           (000C0000, 00568000)	2768 MB
P37: cache            (00628000, 00098000)	304 MB
P38: OP               (006C0000, 000B0000)	352 MB
P39: userdata         (00770000, 00717C00)	3632 MB
P40: flashinfo        (00E87C00, 00008000)	16 MB
Repairing from file "C:/Users/HOCINE/Desktop/111/LG_k8_K350.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition...	Done.

Switched to boot area partition 2.
Writing BOOT2 partition...	Done.

Switched to user area.
Writing GPT partition...	Done.
Writing proinfo partition...	Done.
Writing misc2 partition...	Done.
Writing ftm partition...	Done.
Writing nvram partition...	Done.
Writing protect1 partition...	Done.
Writing protect2 partition...	Done.
Writing lk partition...	Done.
Writing lkbak partition...	Done.
Writing laf partition...	Done.
Writing para partition...	Done.
Writing boot partition...	Done.
Writing recovery partition...	Done.
Writing recoverybak partition...	Done.
Writing logo partition...	Done.
Writing lo_bak_go partition...	Done.
Writing expdb partition...	Done.
Writing seccfg partition...	Done.
Writing oemkeystore partition...	Done.
Writing secro partition...	Done.
Writing keystore partition...	Done.
Writing tee1 partition...	Done.
Writing tee2 partition...	Done.
Writing eksst partition...	Done.
Writing encrypt partition...	Done.
Writing persist_lg partition...	Done.
Writing mpt partition...	Done.
Writing persistent partition...	Done.
Writing lgfota partition...	Done.
Writing cust partition...	Done.
Writing rct partition...	Done.
Writing factory partition...	Done.
Writing persist partition...	Done.
Writing efuse partition...	Done.
Writing frp partition...	Done.
Writing nvdata partition...	Done.

Smart Repair is successfully complete.
SW: 1.7.6; FW: 1.24.
Disconnected.
[/LEFT]
 

zakaria7O

:: عضو مميز ::
إنضم
29 أبريل 2016
المشاركات
1,661
مستوى التفاعل
714
النقاط
113
بارك الله فيك ممتاز موفق بادن الله
 

rahal mohamed

عضو أساسي
إنضم
17 مايو 2013
المشاركات
1,659
مستوى التفاعل
1,671
النقاط
113
بارك الله فيك اخي العزيز مزيد من التالق
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
بارك الله فيك اخي
 

Boufatah

عضو نشط
إنضم
19 أبريل 2013
المشاركات
39
مستوى التفاعل
76
النقاط
0
الإقامة
افلو
رد: تصليح بوت repair boot LG K8_K350z

ممكن البين اوت k350z
 

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تصليح بوت repair boot LG K8_K350z

بارك الله فيك اخي لطرح التجربة
 

DZ-Djamel-GSM

:: مراقب عام ::
إنضم
9 يوليو 2018
المشاركات
5,452
مستوى التفاعل
4,334
النقاط
113
الإقامة
DzGsm
رد: تصليح بوت repair boot LG K8_K350z

السلام عليكم

الله يبارك فيك أخي Sebti _ Gsm شكراً لك عمل ممتاز
 

dawmi

عضو أساسي
إنضم
6 أغسطس 2018
المشاركات
825
مستوى التفاعل
105
النقاط
43
رد: تصليح بوت repair boot LG K8_K350z

السلام عليكم اخي الكريم اريد اصلاح هاتف lg k350z وقد حملت الملفات التي وضعتها في الموضوع هل العملية تتم من خلال smart repair او factory repair بعد مسح الفلاشة وتثبيت فلاشة جديدة
 

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,669
مستوى التفاعل
2,934
النقاط
113
الإقامة
Ghardaïa
رد: تصليح بوت repair boot LG K8_K350z

السلام عليكم اخي الكريم اريد اصلاح هاتف lg k350z وقد حملت الملفات التي وضعتها في الموضوع هل العملية تتم من خلال smart repair او factory repair بعد مسح الفلاشة وتثبيت فلاشة جديدة

وعليك السلام. تتم العملية عن طريق smart repair
بالتوفيق
 

dawmi

عضو أساسي
إنضم
6 أغسطس 2018
المشاركات
825
مستوى التفاعل
105
النقاط
43
رد: تصليح بوت repair boot LG K8_K350z

وعليك السلام. تتم العملية عن طريق smart repair
بالتوفيق

جزاك الله كل خير اخي الكريم وتحية لكل ناس متليلي الشعانبة الطيبين
 

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::
إنضم
19 أغسطس 2012
المشاركات
3,397
مستوى التفاعل
7,523
النقاط
113
الإقامة
EL ASSAFIA **LAGHOUAT
رد: تصليح بوت repair boot LG K8_K350z

موضوع يستحق التثبيت ..........بالتوفيق
 
أعلى