islam071055
عضو نشط
السلام عليكم لدي هاتف g532f dead boot بعد اصلاح البوت ب octoplus pro يعطيني MediaTek USB Port
لو تكرمتم اريد ملف ال scatter
هل من حل لو سمحتم
لو تكرمتم اريد ملف ال scatter
هل من حل لو سمحتم
مساعدة مشكلة توقف الهاتف g532f
- بادئ الموضوع islam071055
- تاريخ البدء
رد: موت هاتف g532f
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4838473475920116EBB8BA5451
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 16EBB8BA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_09_12_2020_15_38_22.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: BOTA0 (00002000, 00002000) 4 MB
P02: nvram (00004000, 00004000) 8 MB
P03: lk (00008000, 00001000) 2048 KB
P04: BOTA1 (00009000, 00001000) 2048 KB
P05: secro (0000A000, 00003800) 7 MB
P06: seccfg (0000D800, 00000400) 512 KB
P07: efuse (0000DC00, 00000400) 512 KB
P08: tee1 (0000E000, 00003000) 6 MB
P09: BOTA2 (00011000, 00003000) 6 MB
P10: EFS (00014000, 00004000) 8 MB
P11: nvdata (00018000, 00010000) 32 MB
P12: PARAM (00028000, 00004000) 8 MB
P13: recovery (0002C000, 00008000) 16 MB
P14: boot (00034000, 00008000) 16 MB
P15: md1img (0003C000, 00010000) 32 MB
P16: md1dsp (0004C000, 00002000) 4 MB
P17: keystore (0004E000, 00004000) 8 MB
P18: omekeystore (00052000, 00001C00) 3584 KB
P19: proinfo (00053C00, 00001400) 2560 KB
P20: para (00055000, 00000400) 512 KB
P21: PERSISTENT (00055400, 00000400) 512 KB
P22: STEADY (00055800, 00000800) 1024 KB
P23: protect1 (00056000, 00004000) 8 MB
P24: protect2 (0005A000, 00004000) 8 MB
P25: RESERVE2 (0005E000, 00002000) 4 MB
P26: system (00060000, 00604000) 3080 MB
P27: cache (00664000, 000C8000) 400 MB
P28: hidden (0072C000, 0001E000) 60 MB
P29: userdata (0074A000, 00746000) 3724 MB
Backuping EFS partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_EFS_0x14000_0x4000_09_12_2020_15_38_22.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03
SW: 2.1.7; FW: 1.24.
Backuping nvdata partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_nvdata_0x18000_0x10000_09_12_2020_15_38_22.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:13
SW: 2.1.7; FW: 1.24.
Selected pit file: D:/Downloads/Compressed/G532FXXU1AQC1_OXE1AQC1/SM-G530F_12-9-2008_0-35-8.pit
Open file "D:/Downloads/Compressed/G532FXXU1AQC1_OXE1AQC1/AP_G532FXXU1AQC1_CL10882375_QB12833881_REV00_user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition BOOT... from 3E000 to 4C15 Done.
Writing partition RECOVERY... from 44800 to 5839 Done.
Writing is finished.
SW: 2.1.7; FW: 1.24.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4838473475920116EBB8BA5451
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 16EBB8BA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_09_12_2020_15_38_22.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: BOTA0 (00002000, 00002000) 4 MB
P02: nvram (00004000, 00004000) 8 MB
P03: lk (00008000, 00001000) 2048 KB
P04: BOTA1 (00009000, 00001000) 2048 KB
P05: secro (0000A000, 00003800) 7 MB
P06: seccfg (0000D800, 00000400) 512 KB
P07: efuse (0000DC00, 00000400) 512 KB
P08: tee1 (0000E000, 00003000) 6 MB
P09: BOTA2 (00011000, 00003000) 6 MB
P10: EFS (00014000, 00004000) 8 MB
P11: nvdata (00018000, 00010000) 32 MB
P12: PARAM (00028000, 00004000) 8 MB
P13: recovery (0002C000, 00008000) 16 MB
P14: boot (00034000, 00008000) 16 MB
P15: md1img (0003C000, 00010000) 32 MB
P16: md1dsp (0004C000, 00002000) 4 MB
P17: keystore (0004E000, 00004000) 8 MB
P18: omekeystore (00052000, 00001C00) 3584 KB
P19: proinfo (00053C00, 00001400) 2560 KB
P20: para (00055000, 00000400) 512 KB
P21: PERSISTENT (00055400, 00000400) 512 KB
P22: STEADY (00055800, 00000800) 1024 KB
P23: protect1 (00056000, 00004000) 8 MB
P24: protect2 (0005A000, 00004000) 8 MB
P25: RESERVE2 (0005E000, 00002000) 4 MB
P26: system (00060000, 00604000) 3080 MB
P27: cache (00664000, 000C8000) 400 MB
P28: hidden (0072C000, 0001E000) 60 MB
P29: userdata (0074A000, 00746000) 3724 MB
Backuping EFS partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_EFS_0x14000_0x4000_09_12_2020_15_38_22.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03
SW: 2.1.7; FW: 1.24.
Backuping nvdata partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_nvdata_0x18000_0x10000_09_12_2020_15_38_22.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:13
SW: 2.1.7; FW: 1.24.
Selected pit file: D:/Downloads/Compressed/G532FXXU1AQC1_OXE1AQC1/SM-G530F_12-9-2008_0-35-8.pit
Open file "D:/Downloads/Compressed/G532FXXU1AQC1_OXE1AQC1/AP_G532FXXU1AQC1_CL10882375_QB12833881_REV00_user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition BOOT... from 3E000 to 4C15 Done.
Writing partition RECOVERY... from 44800 to 5839 Done.
Writing is finished.
SW: 2.1.7; FW: 1.24.
رد: موت هاتف g532f
Welcome to Medusa Pro Software version 2.1.7.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532F
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532F_EMMC_QN16BB.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4838473475920116EBB8BA5451
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 16EBB8BA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_10_12_2020_07_51_58.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 00007800) 15 MB
P02: modem (00009800, 0001CB80) 57.44 MB
P03: sbl1 (00026380, 00000400) 512 KB
P04: ddr (00026780, 00000040) 32 KB
P05: aboot (000267C0, 00001000) 2048 KB
P06: rpm (000277C0, 00000400) 512 KB
P07: qsee (00027BC0, 00000400) 512 KB
P08: qhee (00027FC0, 00000400) 512 KB
P09: fsg (000283C0, 00001800) 3072 KB
P10: sec (00029BC0, 00000020) 16 KB
P11: pad (00029BE0, 00005420) 10.52 MB
P12: param (0002F000, 00005000) 10 MB
P13: efs (00034000, 00007000) 14 MB
P14: modemst1 (0003B000, 00001800) 3072 KB
P15: modemst2 (0003C800, 00001800) 3072 KB
P16: boot (0003E000, 00006800) 13 MB
P17: recovery (00044800, 00007800) 15 MB
P18: fota (0004C000, 00002802) 5.001 MB
P19: backup (0004E802, 000037EE) 6.991 MB
P20: fsc (00051FF0, 00001800) 3072 KB
P21: ssd (000537F0, 00000010) 8 KB
P22: persist (00053800, 00004000) 8 MB
P23: persdata (00057800, 00004800) 9 MB
P24: system (0005C000, 002EC000) 1496 MB
P25: cache (00348000, 00096000) 300 MB
P26: hidden (003DE000, 00005000) 10 MB
P27: userdata (003E3000, 00AAB000) 5.334 GB
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_fsg_0x283c0_0x1800_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.7; FW: 1.24.
Backuping efs partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_efs_0x34000_0x7000_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:05
SW: 2.1.7; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_modemst1_0x3b000_0x1800_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_modemst2_0x3c800_0x1800_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.7; FW: 1.24.
Samsung eMMC only supports smart report operation!
DEVICE_LIFE_TIME_EST_TYP_B : 50% - 60% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.1.7; FW: 1.24.
Welcome to Medusa Pro Software version 2.1.7.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532F
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532F_EMMC_QN16BB.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4838473475920116EBB8BA5451
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 16EBB8BA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_10_12_2020_07_51_58.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 00007800) 15 MB
P02: modem (00009800, 0001CB80) 57.44 MB
P03: sbl1 (00026380, 00000400) 512 KB
P04: ddr (00026780, 00000040) 32 KB
P05: aboot (000267C0, 00001000) 2048 KB
P06: rpm (000277C0, 00000400) 512 KB
P07: qsee (00027BC0, 00000400) 512 KB
P08: qhee (00027FC0, 00000400) 512 KB
P09: fsg (000283C0, 00001800) 3072 KB
P10: sec (00029BC0, 00000020) 16 KB
P11: pad (00029BE0, 00005420) 10.52 MB
P12: param (0002F000, 00005000) 10 MB
P13: efs (00034000, 00007000) 14 MB
P14: modemst1 (0003B000, 00001800) 3072 KB
P15: modemst2 (0003C800, 00001800) 3072 KB
P16: boot (0003E000, 00006800) 13 MB
P17: recovery (00044800, 00007800) 15 MB
P18: fota (0004C000, 00002802) 5.001 MB
P19: backup (0004E802, 000037EE) 6.991 MB
P20: fsc (00051FF0, 00001800) 3072 KB
P21: ssd (000537F0, 00000010) 8 KB
P22: persist (00053800, 00004000) 8 MB
P23: persdata (00057800, 00004800) 9 MB
P24: system (0005C000, 002EC000) 1496 MB
P25: cache (00348000, 00096000) 300 MB
P26: hidden (003DE000, 00005000) 10 MB
P27: userdata (003E3000, 00AAB000) 5.334 GB
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_fsg_0x283c0_0x1800_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.7; FW: 1.24.
Backuping efs partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_efs_0x34000_0x7000_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:05
SW: 2.1.7; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_modemst1_0x3b000_0x1800_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/H8G4u_modemst2_0x3c800_0x1800_10_12_2020_07_51_58.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.7; FW: 1.24.
Samsung eMMC only supports smart report operation!
DEVICE_LIFE_TIME_EST_TYP_B : 50% - 60% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.1.7; FW: 1.24.
رد: موت هاتف g532f
اول حاجة عندك مشكل في Partition config
انسخ الباكاب التي عملعا الميدوسا احفضها
efs......modemst2 ...........modemst1
وقم بالتالي
emmc service tab
https://i.ibb.co/X7GMk7N/3.png
https://i.ibb.co/T2pvfQq/4.png
ثم قم بكتابة EXT_CSD التالي
http://www.mediafire.com/file/a0ug001uwfn1q2j/H8G4u_17_11_2020_09_34_06.bin/file
ثم قم بالاصلاح ب الملفات التالية
http://www.mediafire.com/file/89lrzuaom936722/G532FXWU1ASB1pit%2Bbl.rar/file
ثم قم بكتابة الملفات efs+modemst1+modemst2
اول حاجة عندك مشكل في Partition config
انسخ الباكاب التي عملعا الميدوسا احفضها
efs......modemst2 ...........modemst1
وقم بالتالي
emmc service tab
https://i.ibb.co/X7GMk7N/3.png
https://i.ibb.co/T2pvfQq/4.png
ثم قم بكتابة EXT_CSD التالي
http://www.mediafire.com/file/a0ug001uwfn1q2j/H8G4u_17_11_2020_09_34_06.bin/file
ثم قم بالاصلاح ب الملفات التالية
http://www.mediafire.com/file/89lrzuaom936722/G532FXWU1ASB1pit%2Bbl.rar/file
ثم قم بكتابة الملفات efs+modemst1+modemst2
رد: موت هاتف g532f
السلام عليكم
يجب استبدال الـ emmc.
السلام عليكم
تم استهلاك 50% الى 60% من العمر الافتراضي للذاكرة... "ذاكرة غير صالحة"
يجب استبدال الـ emmc.
رد: موت هاتف g532f
Samsung eMMC only supports smart report operation!
DEVICE_LIFE_TIME_EST_TYP_B : 0% - 10% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.1.7; FW: 1.24.
هل القراءة صحيحة
لم اعرف كيفية كتابة efs+modemst1+modemst2
وشكرا جزيلا على نفاعلكم
Samsung eMMC only supports smart report operation!
DEVICE_LIFE_TIME_EST_TYP_B : 0% - 10% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.1.7; FW: 1.24.
هل القراءة صحيحة
لم اعرف كيفية كتابة efs+modemst1+modemst2
وشكرا جزيلا على نفاعلكم