مساعدة مشكلة مع الفلاشة المناسبة لp6 pro lte رمادي

[albargadi]

السلام عليكم عندي موبيل p6 pro lte رمادي جاني للمحل متوقف على الركوفري بعد التحديث الهوائي
جربت اعادة ضبط المصنع لم يمشي الحال فلاشيه بعد ان اخذت نسخة توقف اعدت له فلاشته للاسف كالنت معطوبة اعتقد انني لم اخذها كاملة كانت ناقصة جربت العديد لم تضبط معي اي واحدة
معلومات الهاتف بعد التفليش هي هكذا
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 196 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D3336453C31034241249268
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM36E
[eMMC] : FLASH_CID : 150100514536334D4203313C68922541
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x0D715958AC78AFD80FB75124522E99D6
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : condor
ProdName : PGN528
ProdModel : PGN528
Device : PGN528
AndroidVer: 7.0
MTKxCPU : MT6737T
MTKxPRJ : WBL7361AC_0405_T8133

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

ياريت احد يملك الفلاشة المناسبة وسؤال اخير هل تتغير معلومات الهاتف بعد التفليش بالفلاشة الخطا ام لا

 

[syfou]

السلام عليكم
أول شيئ إعمل test Emmc بواسطة أي بوكس
إن أمكن ضع اللوغ للهاتف في الحالة الأولى قبل التفليش

 

[albargadi]

لوغو الفلاشة التي اخذتها احتياطا
######################################-=INFINITY-BOX=-######################################################
#
# General Setting
#
####################################-=CHINESE II MIRACLE=-#####################################################
- general: MTK_PLATFORM_CFG
info:
- config_version: V1.1.2
platform: MT6735
project: gnsz6737t_66_n
storage: EMMC
boot_channel: MSDC_0
block_size: 0x20000
############################################################################################################
#
# Layout Setting
#
############################################################################################################
- partition_index: SYS0
partition_name: preloader
file_name: preloader_gnsz6737t_66_n.bin
is_download: true
type: SV5_BL_BIN
linear_start_addr: 0x0
physical_start_addr: 0x0
partition_size: 0x400000
region: EMMC_BOOT_1
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: BOOTLOADERS
reserve: 0x00

- partition_index: SYS1
partition_name: pgpt
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x0
physical_start_addr: 0x0
partition_size: 0x80000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS2
partition_name: proinfo
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x80000
physical_start_addr: 0x80000
partition_size: 0x300000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: PROTECTED
reserve: 0x00

- partition_index: SYS3
partition_name: nvram
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x380000
physical_start_addr: 0x380000
partition_size: 0x500000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: BINREGION
reserve: 0x00

- partition_index: SYS4
partition_name: protect1
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x880000
physical_start_addr: 0x880000
partition_size: 0xA00000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: PROTECTED
reserve: 0x00

- partition_index: SYS5
partition_name: protect2
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x1280000
physical_start_addr: 0x1280000
partition_size: 0xA00000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: PROTECTED
reserve: 0x00

- partition_index: SYS6
partition_name: lk
file_name: lk.bin
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x1C80000
physical_start_addr: 0x1C80000
partition_size: 0x80000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS7
partition_name: para
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x1D00000
physical_start_addr: 0x1D00000
partition_size: 0x80000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS8
partition_name: boot
file_name: boot.img
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x1D80000
physical_start_addr: 0x1D80000
partition_size: 0x1000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS9
partition_name: recovery
file_name: recovery.img
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x2D80000
physical_start_addr: 0x2D80000
partition_size: 0x1000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS10
partition_name: logo
file_name: logo.bin
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x3D80000
physical_start_addr: 0x3D80000
partition_size: 0x800000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS11
partition_name: expdb
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x4580000
physical_start_addr: 0x4580000
partition_size: 0xA00000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS12
partition_name: seccfg
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x4F80000
physical_start_addr: 0x4F80000
partition_size: 0x80000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS13
partition_name: oemkeystore
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x5000000
physical_start_addr: 0x5000000
partition_size: 0x200000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS14
partition_name: secro
file_name: secro.img
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x5200000
physical_start_addr: 0x5200000
partition_size: 0x600000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS15
partition_name: keystore
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x5800000
physical_start_addr: 0x5800000
partition_size: 0x800000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS16
partition_name: tee1
file_name: tz1.img
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x6000000
physical_start_addr: 0x6000000
partition_size: 0x500000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS17
partition_name: tee2
file_name: tz2.img
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x6500000
physical_start_addr: 0x6500000
partition_size: 0x500000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS18
partition_name: frp
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x6A00000
physical_start_addr: 0x6A00000
partition_size: 0x100000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: PROTECTED
reserve: 0x00

- partition_index: SYS19
partition_name: nvdata
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x6B00000
physical_start_addr: 0x6B00000
partition_size: 0x2000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS20
partition_name: metadata
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0x8B00000
physical_start_addr: 0x8B00000
partition_size: 0x2500000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00

- partition_index: SYS21
partition_name: system
file_name: system.img
is_download: true
type: EXT4_IMG
linear_start_addr: 0xB000000
physical_start_addr: 0xB000000
partition_size: 0xE8000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS22
partition_name: cache
file_name: cache.img
is_download: true
type: EXT4_IMG
linear_start_addr: 0xF3000000
physical_start_addr: 0xF3000000
partition_size: 0x19000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS23
partition_name: userdata
file_name: userdata.img
is_download: true
type: EXT4_IMG
linear_start_addr: 0x10C000000
physical_start_addr: 0x10C000000
partition_size: 0x296D80000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00

- partition_index: SYS24
partition_name: flashinfo
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0xFFFF0084
physical_start_addr: 0xFFFF0084
partition_size: 0x1000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: false
is_reserved: true
operation_type: RESERVED
reserve: 0x00

- partition_index: SYS25
partition_name: sgpt
file_name: NONE
is_download: false
type: NORMAL_ROM
linear_start_addr: 0xFFFF0004
physical_start_addr: 0xFFFF0004
partition_size: 0x80000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: false
is_reserved: true
operation_type: RESERVED
reserve: 0x00

 

[albargadi]

وهذا test Emmc

Operation : HW Test [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 196 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D3336453C31034241249268
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM36E
[eMMC] : FLASH_CID : 150100514536334D4203313C68922541
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x0D715958AC78AFD80FB75124522E99D6
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


[Processing] FlashMemory Read-Write test
[eMMC] : [SAMSUNG] , BM36E , 0x3A3E00000 , 14910 MiB
[eMMC] : CID : 150100514536334D4203313C68922541

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

All Done!

Done!
Elapsed: 00:00:32
Reconnect Power/Cable!

 

[albargadi]

جربت اخر فلاشة ولم تتوافق راح يجنني
Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 196 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D3336453C31034241249268
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM36E
[eMMC] : FLASH_CID : 150100514536334D4203313C68922541
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x0D715958AC78AFD80FB75124522E99D6
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6737 , Project : gnsz6737t_66_n , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID NOT supported by BootLoader!
[BL_ERROR] : BBID : Break Flashing! This Firmware will kill phone!

Operation Failed
Elapsed: 00:00:13
Reconnect Power/Cable!

 

[cst_repair]

استعمل اي برنامج اخر مثلا الفلاش تول بخاصية فورمات اول دونلواد لا اصن ان هدا الهاتف صعب الا هدا الحد , اعانك الله

 

[.:: Sebti _ Gsm ::.]

تفضل اخي هده الفلاشة
https://www.dzgsm.com/vb/threads/65666-p6_pro_lte_70_mt6737t-mt6735/

MT6735 نفس الفلاشة لكن يجب تغير scatter fille
حمل ملف scatter fille الذي يصلح مع معالج MT6735 باستعمال نفس الفلاشة

 

[albargadi]

اول مرة اتصادف مع هذا المشكل

 

[albargadi]

تفضل اخي هده الفلاشة
https://www.dzgsm.com/vb/threads/65666-p6_pro_lte_70_mt6737t-mt6735/

ياريت تشرح لي اكثر
مالذي يجب ان يتغير بلاتحديد

 

[albargadi]

تفضل اخي هده الفلاشة
https://www.dzgsm.com/vb/threads/65666-p6_pro_lte_70_mt6737t-mt6735/

روح يا عمي الله يحفظك
تم الامر بنجاح بعد تغير ملف السكيتر

 

[أمين يوسف]

الف شكر اخي العملية ناجحة 100/100
كان الهاتف متوقف على اللوغو ...غيرت ملف السكاتر الموجود عندي بالفلاشة كنت قد حملتها من قبل لانها لم تعمل
واستعملت سكاتر الذي وضعته ونجحت .... الله يحفضك...... للاشارة الفلاشة 6.0