Operation : Read PatternLock [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 22871927
ID_BLOCK_L : BC443ED877E3E81BC4B95B4483DE5676
ID_BLOCK_L : 42319F2E23B21CA92C8BCC050FE6F0DB
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!
Read Ok! Trying decrypt ...
Patternlock NOT set!
Done!
Elapsed: 00:00:43
Reconnect Power/Cable!
Operation : Reset UserLocks [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
BREAK : Device not found!
HINT : Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Reset UserLocks [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 22871927
ID_BLOCK_L : BC443ED877E3E81BC4B95B4483DE5676
ID_BLOCK_L : 42319F2E23B21CA92C8BCC050FE6F0DB
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!
Direct access : Ok!
Processing step #1
Processing step #2
Processing step #3
Processing step #4
Processing step #5
Processing step #6
Processing step #7
UserLocks reset passed!
1. Power On phone, wait 30-50 second, press and hold PowerOn button until device restart!
2. To disable/remove fingerprints enter in Settings -> FingerPrint, set any password, remove fingerprints
3. In some cases require reboot phone twice or wait up to 5 minutes!
Done!
Elapsed: 00:00:33
Reconnect Power/Cable!
