Welcome to Octoplus/Octopus Huawei Software v.1.0.2
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port
ظ¢ظ*ظ،ظ¨-ظ*ظ§-ظ£ظ* ظ*ظ©:ظ£ظ¤:ظ¥ظ© GMT -------------------------------------------------
Starting Auto detect
No devices in manufacture mode detected
Auto detect failed.
Performed by 1.0.2 Software version.
Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port
Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port
Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port
ظ¢ظ*ظ،ظ¨-ظ*ظ§-ظ£ظ* ظ*ظ©:ظ£ظ¥:ظ¤ظ¢ GMT -------------------------------------------------
Starting Connect
No devices in manufacture mode were found
Connect failed.
Performed by 1.0.2 Software version.
Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port
Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port
ظ¢ظ*ظ،ظ¨-ظ*ظ§-ظ£ظ* ظ*ظ©:ظ£ظ¥:ظ¥ظ* GMT -------------------------------------------------
Starting Connect
No devices in manufacture mode were found
Connect failed.
Performed by 1.0.2 Software version.
ظ¢ظ*ظ،ظ¨-ظ*ظ§-ظ£ظ* ظ*ظ©:ظ£ظ¥:ظ¥ظ£ GMT -------------------------------------------------
Starting Connect
No devices in manufacture mode were found
Connect failed.
Performed by 1.0.2 Software version.
ظ¢ظ*ظ،ظ¨-ظ*ظ§-ظ£ظ* ظ*ظ©:ظ£ظ¦:ظ*ظ، GMT -------------------------------------------------
Starting Reset FRP
Searching for connected Fastboot devices...
Device Model: BG2-W09
S/N: 8JUBB18601200150
Initializing Reset FRP process...
Connecting to server...
Writing Reset FRP data...
Reset FRP done.
Performed by 1.0.2 Software version.
