حصريا تم تصليح بوت LG LEON H324T و كسر حماية ذاكرة SAMSUNG و الأول على صعيد المنتديات
نقاط الذاكرة ISP DIRECT و ملف التصليح حصريا تكون في سيبورت OCTOPLUS
و الآن عملية اللوغ
كود:
Welcome to Octoplus Pro JTAG Software version 1.5.8.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: Generic Usb Smart Card Reader 0
Reader #4: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC FJ27MB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 150100464A32374D42022C8FC4B2A2F9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : FJ27MB
Product revision : 0.2
Product serial number : (hex) 2C8FC4B2
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/FJ27MB_06_05_2018_18_33_45.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
EXT_CSD saved to file C:/Users/STARKRIMES/Desktop/H324t/EXT_CSD_06_05_2018_18_33_52.bin.
Switched to boot area partition 1.
Opening C:/Users/STARKRIMES/Desktop/H324t/BOOT1 Samsung eMMC FJ27MB_06_05_2018_18_34_30.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.8; FW: 1.23.
Switched to boot area partition 2.
Opening C:/Users/STARKRIMES/Desktop/H324t/BOOT2 Samsung eMMC FJ27MB_06_05_2018_18_34_49.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.8; FW: 1.23.
Erasing. Please wait... Done.
SW: 1.5.8; FW: 1.23.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC FJ27MB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 150100464A32374D42022C8FC4B2A2F9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : FJ27MB
Product revision : 0.2
Product serial number : (hex) 2C8FC4B2
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/FJ27MB_06_05_2018_18_36_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
Cancelled writing.
Switched to boot area partition 1.
Opening C:/Users/STARKRIMES/Desktop/H324t/BOOT1 Samsung eMMC FJ27MB_06_05_2018_18_34_30.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.5.8; FW: 1.23.
Switched to boot area partition 2.
Opening C:/Users/STARKRIMES/Desktop/H324t/BOOT2 Samsung eMMC FJ27MB_06_05_2018_18_34_49.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.5.8; FW: 1.23.
Writing EXT_CSD succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC FJ27MB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 150100464A32374D42022C8FC4B2A2F9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : FJ27MB
Product revision : 0.2
Product serial number : (hex) 2C8FC4B2
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/FJ27MB_06_05_2018_18_36_37.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
---------------------------------------------------------------
Selected scatter file: E:/FLASH TELEPHONE/LG/H/H324t/MT6582__lge__LG-H324__my50ds__5.0.1__LGH324AT-00-V10i-GLOBAL-COM-AUG-10-2015+0/MT6582__lge__LG-H324__my50ds__5.0.1__LGH324AT-00-V10i-GLOBAL-COM-AUG-10-2015+0/MT6582_Android_scatter.txt.
Scatter file type 2.
Opened input file: E:/FLASH TELEPHONE/LG/H/H324t/MT6582__lge__LG-H324__my50ds__5.0.1__LGH324AT-00-V10i-GLOBAL-COM-AUG-10-2015+0/MT6582__lge__LG-H324__my50ds__5.0.1__LGH324AT-00-V10i-GLOBAL-COM-AUG-10-2015+0/preloader_muse6582_y50_l.bin
Found 5 eMMC supported CID:
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : Q7XSAB
eMMC CID : 150100513758534142
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : FJW7MB
eMMC CID : 150100464A57374D42
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : Q72SMB
eMMC CID : 150100513732534D42
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : QN1SMB
eMMC CID : 150100514E31534D42
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : FJ27MB
eMMC CID : 150100464A32374D42
Writing. Please wait...
Write data verification is enabled.
Writing partition PRELOADER... Write data verification is enabled.
Done.
Writing partition MBR... Done.
Writing partition EBR1... Done.
Writing partition UBOOT... Done.
Writing partition LAF... Done.
Writing partition BOOTIMG... Done.
Writing partition RECOVERY... Done.
Writing partition SEC_RO... Done.
Writing partition LOGO... Done.
Writing partition EBR2... Done.
Writing partition EBR3... Done.
Writing partition PERSIST... Done.
Writing partition CUST... Done.
Writing partition FACTORY... Done.
Writing partition ANDROID... Done.
Writing partition CACHE... Done.
Writing partition USRDATA... Done.
Writing checksums...Done.
Writing finished.
SW: 1.5.8; FW: 1.23.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC FJ27MB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 150100464A32374D42022C8FC4B2A2F9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : FJ27MB
Product revision : 0.2
Product serial number : (hex) 2C8FC4B2
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/FJ27MB_06_05_2018_19_26_53.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
P00: EXT2FS (0003B800, 00004000) 8 MB
P01: EXT2FS (0003F800, 00003000) 6 MB
P02: EXT2FS (00042800, 0000B000) 22 MB
P03: EXT2FS (00054800, 00032000) 100 MB
P04: EXT2FS (00091000, 002FA800) 1525 MB
P05: EXT2FS (0038B800, 0007D000) 250 MB
P06: EXT2FS (00408800, 00339000) 1650 MB
P07: EXT2FS (0000C800, 00005000) 10 MB
P08: EXT2FS (00011800, 00005000) 10 MB
P09: EXT2FS (0002F400, 00003000) 6 MBملاحظة: ملف التصليح مبرمج لكسر الحماية لوحده
و شكرا
ارجو الدعاء لي بالتوفيق فضلا و ليس امرا
