النتائج 1 إلى 4 من 4

الموضوع: World's1st VolcanoBox1.9.9SPD Android Imei,MTK Android Root,MTK Android Custom file:)

  1. Top | #1

    :: الإدارة ::
    تاريخ التسجيل
    Apr 2012
    الإقامة
    الجزائر الغالية
    المشاركات
    5,906
    معدل تقييم المستوى
    10
    الشكر
    20,349
    تم شكره 30,373 في 4,504 مشاركة.

    افتراضي World's1st VolcanoBox1.9.9SPD Android Imei,MTK Android Root,MTK Android Custom file:)


    VolcanoBox 1.9.9

    Truly World's 1st

    ▬●
    Truly World's 1st ALL MTK ANDROID ROOT (beta)
    ▬●
    Truly World's 1st MTK ANDROID CUSTOM AREA WRITE FLASH
    ▬●
    Truly World's 1st MTK ANDROID CUSTOM AREA READ FLASH
    ▬●
    Truly World's 1st SPD ANDROID IMEI REPAIR
    ▬● MTK6253 decryption



    How to Root Any MTK Android phone ?

    1- Set pinouts or detect pinouts
    2- Go to mtk tab
    3- Select Boot Built-in-Boot-12
    4- Click on read info
    5- Untick auto pinfind
    6- Make sure your phone com port selected
    7- Click on run
    8- Read carefully BOOTIMG address
    9- Click on Read Flash
    10- Write BOOTIMG ADDR into Start Address ( without 0x )
    11- Write BOOTIMG length into Flash Size ( without 0x )
    12- Click on reset pinouts
    13- Click on run
    14- Save file
    15- Go to Tools
    16- Click on One-key Root
    17- Click on Select Open
    18- Select your read file of BOOTIMG
    19- Click on Convert
    20- Go to MTK tab
    21- Click on write flash
    22- Select Built-in-Boot-12
    23- Select Converted File
    24- Write BootIMG ADDR into START ADDRESS
    25- Click on Reset pinouts
    26- Click on write
    27- After writing Your phone will be ROOTED !!!!!



    How to Read and Write Custom/Specific Area File to MTK Android ?

    1- Set pinouts or detect pinouts
    2- Go to mtk tab
    3- Select Boot Built-in-Boot-12
    4- Click on read info
    5- Untick auto pinfind
    6- Make sure your phone com port selected
    7- Click on run
    8- Read carefully BOOTIMG address ( or your desire area address )
    9- Click on Read Flash
    10- Write BOOTIMG ( or your desire area address ) ADDR into Start Address ( without 0x )
    11- Write BOOTIMG ( or your desire area length ) length into Flash Size ( without 0x )
    12- Click on reset pinouts
    13- Click on run
    14- Save file ( your desire area file read done )



    Now how you can write ?

    1- Set pinouts or detect pinouts
    2- Go to mtk tab
    3- Select Boot Built-in-Boot-12
    4- Click on write flash
    5- Select Your desire File
    6- Write BootIMG ( or your desire area address ) ADDR into START ADDRESS
    7- Click on Reset pinouts
    8- Click on write
    9- Your desire File write done !!


    How to Write SPD Android imei ?


    1- goto detect tab
    2-select spd from list
    3-attach phone
    4-click on detect tab
    5- press detect (keep in mind where is D- and D+ gnd)
    6- clear pinout
    7-close volcano
    8- again open volcano
    9- mobile connect with volcano jig but volcano phone cable remove to volcano
    10- go to detect tab select spd
    11- select d-, d+ and gnd manual and set pinout(where it's detect before)
    12- go to spd tab
    13- R/W IMEI chooses com
    14- untick auto detect pinout
    15- press these key from keybord to enable imei alt+ctrl+i
    16- select boot 6530
    17-click on write imei
    18-click run
    19-new ****** will be open
    20 -choose usb
    21-write imei in box
    22-click on write imei
    23-then connect volcano jig cable jack in volcano


    IF WRITE IMEI WITH USB CABLE DISSCONNECT USB + SUPPLY VCC WORK WITH ONLY THREE WiRE D+ D- GND

    if write imei usb with usb cable and boot key mobile, dissconect usb + supply (vcc)
    usb cable connect only D+ D- GND
    1-go to spd tab
    2-R/W IMEI chooses com
    3-untick auto detect pinout
    4-press these key from keybord to enable imei alt+ctrl+i
    5-click on write imei
    6-click run
    7-new ****** will be open
    8-choose usb NOT SELECT ANY COM PORT
    9-write imei in box
    10-click on write imei
    11-then connect press mobile boot key and inseri usb(connect only three wire usb D+ D- GND VCC +SUPPLY NOT CONNECT) AFTER 10 15 SEC YOUR ANY SPD IMEI WRITE

    Imei changing is illegal – imei repairing or changing is only for repairing original only !!

    الروابط تظهر للاعضاء فقط



    الروابط تظهر للاعضاء فقط





  2. 6 من أعضاء المنتدى أعجبوا بمشاركة DZ-Developer


  3. Top | #2

    عضو مشارك
    تاريخ التسجيل
    Mar 2013
    الإقامة
    SYRIA
    المشاركات
    127
    معدل تقييم المستوى
    13
    الشكر
    214
    تم شكره 457 في 100 مشاركة.

    افتراضي

    متابعة ممتازة اخي جمال

  4. Top | #3

    :: Super User::

    تاريخ التسجيل
    Mar 2012
    الإقامة
    adrar
    المشاركات
    1,171
    معدل تقييم المستوى
    57
    الشكر
    721
    تم شكره 2,700 في 779 مشاركة.

    افتراضي


  5. Top | #4

    عضو نشط
    تاريخ التسجيل
    Mar 2013
    المشاركات
    224
    معدل تقييم المستوى
    13
    الشكر
    527
    تم شكره 451 في 163 مشاركة.

    افتراضي

    شكرا على المتابعة

المواضيع المتشابهه

  1. تحديثات: VolcanoBox 2.5.3 MTK Android, SPD Android, Factory Flash new File, Root & Much More
    بواسطة El_Hakim_Gsm في المنتدى قسم الفولكانو بوكس & VolcanoBox
    مشاركات: 6
    آخر مشاركة: 29-04-2014, 19:29

الكلمات الدلالية لهذا الموضوع

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
Powered by vBulletin® Copyright © 2021 vBulletin Solutions, Inc. All rights reserved. Hosted by Edisoft