الحمدلله تم تصليح emmc كوندور plume p8 على Octoplus JTAG بعد عناء كبير في ايجاد نقطة TP Samsung emmc
LOG 1
كود:
[SIZE=2]Welcome to Octoplus Pro JTAG Software version 1.5.8.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: Generic Usb Smart Card Reader 0
Reader #4: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC 000000
Page size : 512 B
Block size : 512 B
Block count : 34422784
Size : 16.41 GB (16808.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501003030303030305620140423582F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 000000
Product revision : 5.6
Product serial number : (hex) 20140423
Manufacturing date : 05/2021
---------------------------------------------------------------
CSD Info
CSD : 902701320F5903FFF6DBFFEF8A404023
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 4026531840 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/000000_30_04_2018_08_26_05.bin.
Connect successful.[/SIZE]
كود:
Welcome to Octoplus Pro JTAG Software version 1.5.8.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: Generic Usb Smart Card Reader 0
Reader #4: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Condor
Model : PGN 605
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/CONDOR_PGN 605 STARKRIMES.srf
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC 000000
Page size : 512 B
Block size : 512 B
Block count : 34422784
Size : 16.41 GB (16808.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501003030303030305620140423582F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 000000
Product revision : 5.6
Product serial number : (hex) 20140423
Manufacturing date : 05/2021
---------------------------------------------------------------
CSD Info
CSD : 902701320F5903FFF6DBFFEF8A404023
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 4026531840 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/000000_30_04_2018_10_49_00.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/CONDOR_PGN 605 STARKRIMES.srf".
Write data verification is disabled.
Writing GPT partition... Done.
Writing proinfo partition... Done.
Writing nvram partition... Done.
Writing protect1 partition... Done.
Writing protect2 partition... Done.
Writing lk partition... Done.
Writing para partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing logo partition... Done.
Writing expdb partition... Done.
Writing seccfg partition... Done.
Writing oemkeystore partition... Done.
Writing secro partition... Done.
Writing keystore partition... Done.
Writing tee1 partition... Done.
Writing tee2 partition... Done.
Writing frp partition... Done.
Writing nvdata partition... Done.
Writing metadata partition... Done.
Writing system partition... Done.
Writing cache partition... Done.
Writing userdata partition... Done.
Writing flashinfo partition... Done.
Writing is finished.
SW: 1.5.8; FW: 1.23.وهناك ملفات حصرية لتصليح هواتف
Allview_V2 VIPER X
BLU_VIVO XL
Gionee_ELIFE S PLUS
Gionee_S PLUS
Highscreen_BAY
Qmobile_NOIR Z9 PLUS
Walton_PRIMO NX3
و قريبا الملفات ستكون على السيبورت
السلام عليكم
