قريبا على العملاق OCTOPLUS /MEDUSA PRO
تصليح و تفليش EMMC العنيد DOOGEE X5 MT6580
الأول عالميا
LOG 1
كود:
[SIZE=2]Welcome to Octoplus Pro JTAG Software version 1.5.8.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: Generic Usb Smart Card Reader 0
Reader #4: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC F722MB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100463732324D420020B29A17231B
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : F722MB
Product revision : 0.0
Product serial number : (hex) 20B29A17
Manufacturing date : 02/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 2539520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/F722MB_27_04_2018_10_01_13.bin.
Connect successful.[/SIZE]LOG 2
كود:
[SIZE=2]Welcome to Octoplus Pro JTAG Software version 1.5.8.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: Generic Usb Smart Card Reader 0
Reader #4: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Doogee
Model : X5
SRF : C:/Users/STARKRIMES/Desktop/Doogee_X5_EMMC_By Starkrimes.srf
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC F722MB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100463732324D420020B29A17231B
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : F722MB
Product revision : 0.0
Product serial number : (hex) 20B29A17
Manufacturing date : 02/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 2539520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/F722MB_27_04_2018_10_01_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00002800) 5 MB
P03: protect1 (00004400, 00005000) 10 MB
P04: protect2 (00009400, 00005000) 10 MB
P05: seccfg (0000E400, 00000200) 256 KB
P06: lk (0000E600, 00000300) 384 KB
P07: boot (0000E900, 00008000) 16 MB
P08: recovery (00016900, 00008000) 16 MB
P09: para (0001E900, 00000400) 512 KB
P10: logo (0001ED00, 00004000) 8 MB
P11: expdb (00022D00, 00005000) 10 MB
P12: frp (00027D00, 00000800) 1024 KB
P13: nvdata (00028500, 00010000) 32 MB
P14: metadata (00038500, 00013B00) 39.38 MB
P15: oemkeystore (0004C000, 00001000) 2048 KB
P16: secro (0004D000, 00003000) 6 MB
P17: keystore (00050000, 00004000) 8 MB
P18: system (00054000, 00300000) 1536 MB
P19: cache (00354000, 00080000) 256 MB
P20: userdata (003D4000, 00AB3C00) 5.351 GB
P21: flashinfo (00E87C00, 00008000) 16 MB
---------------------------------------------------------------
Selected scatter file: E:\FLASH TELEPHONE\Doogee\X5\CM2MTK Read out Scatter By Starkrimes\MT6580__DOOGEE__X5__hct6580_weg_c_m__6.0__DOOGEE-X5-Android6.0-20160624/MT6580_Android_scatter.tx
Scatter file type 2.
Opened input file: E:\FLASH TELEPHONE\Doogee\X5\CM2MTK Read out Scatter By Starkrimes\MT6580__DOOGEE__X5__hct6580_weg_c_m__6.0__DOOGEE-X5-Android6.0-20160624/preloader_hct6580_weg_a_l.bin
Found 1 eMMC supported CID:
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H8G1e
eMMC CID : 90014A483847316505
Writing. Please wait...
Write data verification is enabled.
Writing partition preloader... Write data verification is enabled.
Done.
Writing partition lk... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition logo... Done.
Writing partition secro... Done.
Writing partition system... Done.
Writing partition cache... Done.
Writing partition userdata... Done.
Writing checksums...Done.
Writing finished.
SW: 1.5.8; FW: 1.23.[/SIZE]ترقبو قريبا التحديثات الجديدة
Condor
Iris
Doogee
Wiko
etc...
والله ولي التوفيق
