لأول مرة في العالم إصلاح بوت +Samsung S8 بكابل الusb فقط
كود:
.
Welcome to Medusa Pro Software version 1.5.5.
Started.
Reader #0: Gemalto e-gate Smart Card 0
Model Settings:
Interface : USB
Core : Qualcomm MSM8998 UFS
Loader : QLoader_v2_Samsung
Connecting...
Sending loader...OK.
Loader successfully initialized.
INFO: Device Total Logical Blocks: 0xee1c00
INFO: Device Block Size in Bytes: 0x1000
INFO: Device Total Physical Partitions: 0x0
INFO: Device Manufacturer ID: 0x198
INFO: Device Serial Number: 0x48494241
INFO: {"storage_info": {"total_blocks":15604736, "block_size":4096, "page_size":4096, "num_physical":4, "manufacturer_id":408, "serial_num":1212760641, "fw_version":"300","mem_type":"UFS","prod_name":"T HGAF4G9N4LBAIRA0300"}}
UFS fInitialized: 0x1
UFS Current LUN Number: = 0xd0
UFS Total Active LU: 0x4
UFS wManufacturerID: 0x198
UFS Boot Partition Enabled: 0x1
UFS Raw Device Capacity: = 0x7734000
UFS Min Block Size: 0x8
UFS Erase Block Size: 0x2000
UFS Allocation Unit Size: 0x1
UFS RPMB ReadWrite Size: = 0x40
UFS Number of Allocation Uint for This LU: 0x0
UFS Logical Block Size: 0x0
UFS Provisioning Type: 0x0
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x801f
UFS dEnhanced1MaxNAllocU: 0x3b9a
UFS wEnhanced1CapAdjFac: 0x200
UFS dEnhanced2MaxNAllocU: = 0x20
UFS wEnhanced2CapAdjFac: 0x200
UFS dEnhanced3MaxNAllocU: 0x0
UFS wEnhanced3CapAdjFac: 0x0
UFS dEnhanced4MaxNAllocU: 0x0
UFS wEnhanced4CapAdjFac: 0x0
UFS LUN Enable Bitmask: 0xf
UFS Logical Block Count: 0x0
UFS bConfigDescrLock: 0x0
UFS iManufacturerName String Index: 0x1
UFS iProductName String Index: 0x2
UFS iSerialNumber String Index: 0x3
UFS iOemID String Index: 0x4
UFS Inquiry Command Output: TOSHIBA THGAF4G9N4LBAIRA0300
ACK
Device : TOSHIBA THGAF4G9N4LBAIRA0300
Core : Qualcomm MSM8998 UFS
Page size : 4096 B
Block size : 4096 B
Block count : 15622144
Size : 59.59 GB (61024.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: .
Physical partition number: 0
Block count : 15604736 (0xEE1C00)
Size : 59.53 GB (60956.00 MB)
P00: GPT (00000000, 00000108) 1056 KB
P01: modemst1 (00000108, 00000200) 2048 KB
P02: modemst2 (00000308, 00000200) 2048 KB
P03: fsc (00000508, 00000001) 4 KB
P04: ssd (00000509, 00000002) 8 KB
P05: persist (0000050B, 00002000) 32 MB
P06: efs (0000250B, 00001400) 20 MB
P07: param (0000390B, 00000A00) 10 MB
P08: misc (0000430B, 00000100) 1024 KB
P09: keystore (0000440B, 00000080) 512 KB
P10: bota (0000448B, 00001E00) 30 MB
P11: fota (0000628B, 00001500) 21 MB
P12: persistent (0000778B, 00000080) 512 KB
P13: steady (0000780B, 00000400) 4 MB
P14: keyrefuge (00007C0B, 00001000) 16 MB
P15: apnhlos (00008C0B, 00005F00) 95 MB
P16: modem (0000EB0B, 00005500) 85 MB
P17: boot (0001400B, 00004000) 64 MB
P18: recovery (0001800B, 00004000) 64 MB
P19: system (0001C00B, 00125C00) 4.59 GB
P20: cache (00141C0B, 00025800) 600 MB
P21: carrier (0016740B, 00002D00) 45 MB
P22: omr (0016A10B, 00000A00) 10 MB
P23: nad_refer (0016AB0B, 00000600) 6 MB
P24: debug (0016B10B, 00000A00) 10 MB
P25: userdata (0016BB0B, 00D760D4) 53.84 GB
Physical partition number: 1
Block count : 1024 (0x400)
Size : 4.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 000003D9) 3940 KB
Physical partition number: 2
Block count : 1024 (0x400)
Size : 4.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 000003D9) 3940 KB
Physical partition number: 3
Block count : 15360 (0x3C00)
Size : 60.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: rpm (00000006, 00000080) 512 KB
P02: tz (00000086, 00000200) 2048 KB
P03: hyp (00000286, 00000080) 512 KB
P04: fsg (00000306, 00000200) 2048 KB
P05: sec (00000506, 00000004) 16 KB
P06: pmic (0000050A, 00000080) 512 KB
P07: dsp (0000058A, 00001000) 16 MB
P08: abl (0000158A, 00001400) 20 MB
P09: devinfo (0000298A, 00000001) 4 KB
P10: bluetooth (0000298B, 00000100) 1024 KB
P11: bksecapp (00002A8B, 00000060) 384 KB
P12: keymaster (00002AEB, 00000080) 512 KB
P13: cmnlib (00002B6B, 00000080) 512 KB
P14: cmnlib64 (00002BEB, 00000080) 512 KB
P15: apdp (00002C6B, 00000040) 256 KB
P16: msadp (00002CAB, 00000040) 256 KB
P17: dpo (00002CEB, 00000001) 4 KB
P18: limits (00002CEC, 00000001) 4 KB
P19: devcfg (00002CED, 00000020) 128 KB
P20: storsec (00002D0D, 00000080) 512 KB
P21: ddr (00002D8D, 00000100) 1024 KB
P22: pad (00002E8D, 00000D52) 13.32 MB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/Samsung_SM-G955U_USB_UFS.srf".
Write data verification is enabled.
Physical partition number: 0
Writing GPT partition... Done.
Physical partition number: 0
Writing fsc partition... Done.
Physical partition number: 0
Writing ssd partition... Done.
Physical partition number: 0
Writing persist partition... Done.
Physical partition number: 0
Writing param partition... Done.
Physical partition number: 0
Writing misc partition... Done.
Physical partition number: 0
Writing keystore partition... Done.
Physical partition number: 0
Writing bota partition... Done.
Physical partition number: 0
Writing fota partition... Done.
Physical partition number: 0
Writing persistent partition... Done.
Physical partition number: 0
Writing steady partition... Done.
Physical partition number: 0
Writing keyrefuge partition... Done.
Physical partition number: 0
Writing apnhlos partition... Done.
Physical partition number: 0
Writing modem partition... Done.
Physical partition number: 0
Writing boot partition... Done.
Physical partition number: 0
Writing recovery partition... Done.
Physical partition number: 0
Writing carrier partition... Done.
Physical partition number: 0
Writing omr partition... Done.
Physical partition number: 0
Writing nad_refer partition... Done.
Physical partition number: 0
Writing debug partition... Done.
Physical partition number: 1
Writing GPT partition... Done.
Physical partition number: 1
Writing xbl partition... Done.
Physical partition number: 2
Writing GPT partition... Done.
Physical partition number: 2
Writing xbl partition... Done.
Physical partition number: 3
Writing GPT partition... Done.
Physical partition number: 3
Writing rpm partition... Done.
Physical partition number: 3
Writing tz partition... Done.
Physical partition number: 3
Writing hyp partition... Done.
Physical partition number: 3
Writing fsg partition... Done.
Physical partition number: 3
Writing sec partition... Done.
Physical partition number: 3
Writing pmic partition... Done.
Physical partition number: 3
Writing dsp partition... Done.
Physical partition number: 3
Writing abl partition... Done.
Physical partition number: 3
Writing devinfo partition... Done.
Physical partition number: 3
Writing bluetooth partition... Done.
Physical partition number: 3
Writing bksecapp partition... Done.
Physical partition number: 3
Writing keymaster partition... Done.
Physical partition number: 3
Writing cmnlib partition... Done.
Physical partition number: 3
Writing cmnlib64 partition... Done.
Physical partition number: 3
Writing apdp partition... Done.
Physical partition number: 3
Writing msadp partition... Done.
Physical partition number: 3
Writing dpo partition... Done.
Physical partition number: 3
Writing limits partition... Done.
Physical partition number: 3
Writing devcfg partition... Done.
Physical partition number: 3
Writing storsec partition... Done.
Physical partition number: 3
Writing ddr partition... Done.
Physical partition number: 3
Writing pad partition... Done.
Smart Repair is successfully complete.
SW: 1.5.5; FW: .
Disconnected.
