Medusa PRO v.1.5.4 is out

[BY AMINO GSM]

Medusa PRO v.1.5.4 Release Notes:

- Added “eMMC Write/Update firmware” for the following Samsung eMMC chips:
KLMAG2GE2A-A001 (MAG2GA)
KLM8G1WEMB-B011 (8WMB1R)
KLMAG4FE4B-B002 (MAG4FB)
KMJ5U000WA-B409 (J5U00A)
KMJ5U000WM-B409 (J5U00M)
KMK2U000VM-B604 (K2U00M)
KMK5W000VM-B312 (K5WVMB)
KMK5X000YM-B314 (K5XYMB)
KML5U000HM-B505 (L5U00M)
KMSJS000KA-B308 (SJS00A)
KMS5X000KM-B313 (S5XKMB)
KMV3U000LM-B304 (V3U00M)
KMVUS000LM-B304 (VUS00M)
KMVWU000LM-B900 (VWU00M)
KMN9W000RM-B205 (N9WRMB)

To write/update firmware in mentioned above eMMC chips, do the following:
Select "eMMC" interface option
Select "Brand: eMMC_chips"
Select eMMC chip part number in "Model:" software list
Press "Help" button to view eMMC pinout and TP picture. Acknowledge the manual.
Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
Press "Connect" button to connect eMMC (if necessary, connect TP to GND)
When connection is successful, release (disconnect) TP wire from GND and go to "eMMC service" tab in the software
Press "Write/Update firmware" button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button
NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC!

- Box firmware has been updated! In 1.23 firmware version we have improved “eMMC Write/Update firmware” procedure. To update Box firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at “Welcome” tab in Medusa Pro Software.

- Added support for the following models via eMMC:
Haier W716 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. gunit1)
LG D722V - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Motorola XT1550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Motorola XT1562 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SM-G532M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Sony F3111 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Added support for the following models via USB:
Alcatel 5054N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Alcatel 6055D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Huawei Nexus 6 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Vivo Y66 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
ZZTE Z983 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Added 20 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported):
Alcatel - added loader for MSM8976
Asus - added loaders for MSM8937
Coolpad - added loader for MSM8976
Cyan - added loaders for MSM8936 and MSM8994
Huawei - added loader for MSM8994
Lenovo - added loaders for MSM8909 and MSM8976
Micromax (MMX) - added loader for MSM8909
Oppo - added loader for MSM8976
Wik - added loader for MSM8909
Wing - added loader for MSM8937
ZTE - added loaders for MSM8909 and MSM8940
- Added general (common) Qualcomm USB loaders for MSM8916 and MSM8936.

- Improved “Factory Repair” operation for MediaTek CPUs-based LG devices.

- Some adjustments and improvements were made

- Uploaded new “Live logs” into the Support Area.