النتائج 1 إلى 1 من 1

الموضوع: Medusa PRO v.1.5.4 is out

  1. Top | #1

    :: مرشح للإشراف ::
    :: قسم الأجهزة الصينية ::


    تاريخ التسجيل
    Dec 2014
    الإقامة
    oran
    المشاركات
    2,457
    معدل تقييم المستوى
    126
    الشكر
    13,493
    تم شكره 6,144 في 1,520 مشاركة.

    افتراضي Medusa PRO v.1.5.4 is out

    Medusa PRO v.1.5.4 Release Notes:

    - Added “eMMC Write/Update firmware” for the following Samsung eMMC chips:
    KLMAG2GE2A-A001 (MAG2GA)
    KLM8G1WEMB-B011 (8WMB1R)
    KLMAG4FE4B-B002 (MAG4FB)
    KMJ5U000WA-B409 (J5U00A)
    KMJ5U000WM-B409 (J5U00M)
    KMK2U000VM-B604 (K2U00M)
    KMK5W000VM-B312 (K5WVMB)
    KMK5X000YM-B314 (K5XYMB)
    KML5U000HM-B505 (L5U00M)
    KMSJS000KA-B308 (SJS00A)
    KMS5X000KM-B313 (S5XKMB)
    KMV3U000LM-B304 (V3U00M)
    KMVUS000LM-B304 (VUS00M)
    KMVWU000LM-B900 (VWU00M)
    KMN9W000RM-B205 (N9WRMB)

    To write/update firmware in mentioned above eMMC chips, do the following:
    Select "eMMC" interface option
    Select "Brand: eMMC_chips"
    Select eMMC chip part number in "Model:" software list
    Press "Help" button to view eMMC pinout and TP picture. Acknowledge the manual.
    Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
    Press "Connect" button to connect eMMC (if necessary, connect TP to GND)
    When connection is successful, release (disconnect) TP wire from GND and go to "eMMC service" tab in the software
    Press "Write/Update firmware" button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button
    NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC!

    - Box firmware has been updated! In 1.23 firmware version we have improved “eMMC Write/Update firmware” procedure. To update Box firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at “Welcome” tab in Medusa Pro Software.

    - Added support for the following models via eMMC:
    Haier W716 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. gunit1)
    LG D722V - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Motorola XT1550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Motorola XT1562 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Samsung SM-G532M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Sony F3111 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - Added support for the following models via USB:
    Alcatel 5054N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Alcatel 6055D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Huawei Nexus 6 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Vivo Y66 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    ZZTE Z983 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - Added 20 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported):
    Alcatel - added loader for MSM8976
    Asus - added loaders for MSM8937
    Coolpad - added loader for MSM8976
    Cyan - added loaders for MSM8936 and MSM8994
    Huawei - added loader for MSM8994
    Lenovo - added loaders for MSM8909 and MSM8976
    Micromax (MMX) - added loader for MSM8909
    Oppo - added loader for MSM8976
    Wik - added loader for MSM8909
    Wing - added loader for MSM8937
    ZTE - added loaders for MSM8909 and MSM8940
    - Added general (common) Qualcomm USB loaders for MSM8916 and MSM8936.

    - Improved “Factory Repair” operation for MediaTek CPUs-based LG devices.

    - Some adjustments and improvements were made

    - Uploaded new “Live logs” into the Support Area.

  2. 6 من أعضاء المنتدى أعجبوا بمشاركة BY AMINO GSM


المواضيع المتشابهه

  1. استفسار؟ مالفرق بين Octoplus jTag و Octoplus jTag Pro و Medusa و Medusa Pro
    بواسطة cranknet في المنتدى قسم خاص بأسعار البوكسات وخصائصها
    مشاركات: 13
    آخر مشاركة: 12-09-2020, 11:50

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
Powered by vBulletin® Copyright © 2021 vBulletin Solutions, Inc. All rights reserved. Hosted by Edisoft