- إنضم
- 26 فبراير 2014
- المشاركات
- 3,407
- مستوى التفاعل
- 6,020
- النقاط
- 0
VolcanoBox Inferno UniTool 1.4.1 Huawei Modems & Custom Partition by Logical Block
What's new in VolcanoBox Inferno UniTool 1.4.1
Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
Fixed some VIVO phones not detecting by selecting Auto cpu.
How to Unlock Huawei Modems with Inferno ?
Open Inferno UniTool 1.4.1
Go to Huawei -> Modem
Connect Huawei Modem in usb
in Normal mode
Click on Read info.
make sure you have installed Correct Drivers
Check software ver inside your modem.
go to back and select Erase and then select carefully your Modem model & Firmware ver
Firmware ver you checked from Read Info.
Check List Below which Modem & Ver Required Erase
Connect Test Point
Check List Below which Modem & Ver Required Testpoint
you can download all Test Points from here https://www.mediafire.com/folder/ysz...ems_Test_point
Make Sure in Device Manger have one Huawei port !!
Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.
it will automatically reboot after successfully Erased
in device manager it will show 2 ports after successfully Erased.
Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver
Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
click on Next and let it patch flash.
After Patch Flash success, please look at list what operation needed for POST PATCH Flash.
Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
Some modems need to repair Imei by Inferno UniTool
Some modems need to Code calculate.
You must update your modem Firmware to LATEST Firmware to run super fine.
Make sure you Repair Wifi
Kindly have a look at list below for each modems model.
You have to Download HWModem.sys and Place into Inferno Unitool Folder
Complete Details of each ver & steps you have to do while unlock
Model: E5330s-B2
Supported Ver: 21.210.21.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.21.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.21.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5573cs-609
Supported Ver: 21.318.xx.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E5573cs-609
Supported Ver: 21.323.00.00.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.01.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.02.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.03.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.04.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E5573cs-322
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E5573cs-322
Supported Ver: 21.323.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E8372h-153
Supported Ver: 21.313.xx.xx.306
Test Point: YES
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
Model: E8372h-153
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E8372h-153
Supported Ver: 21.321.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E5573s-320
Supported Ver: 21.315.01.00.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
Model: E5573s-320
Supported Ver: 21.315.01.01.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
What's new in VolcanoBox Inferno UniTool 1.4.1
Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
Fixed some VIVO phones not detecting by selecting Auto cpu.
How to Unlock Huawei Modems with Inferno ?
Open Inferno UniTool 1.4.1
Go to Huawei -> Modem
Connect Huawei Modem in usb
in Normal mode
Click on Read info.
make sure you have installed Correct Drivers
Check software ver inside your modem.
go to back and select Erase and then select carefully your Modem model & Firmware ver
Firmware ver you checked from Read Info.
Check List Below which Modem & Ver Required Erase
Connect Test Point
Check List Below which Modem & Ver Required Testpoint
you can download all Test Points from here https://www.mediafire.com/folder/ysz...ems_Test_point
Make Sure in Device Manger have one Huawei port !!
Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.
it will automatically reboot after successfully Erased
in device manager it will show 2 ports after successfully Erased.
Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver
Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
click on Next and let it patch flash.
After Patch Flash success, please look at list what operation needed for POST PATCH Flash.
Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
Some modems need to repair Imei by Inferno UniTool
Some modems need to Code calculate.
You must update your modem Firmware to LATEST Firmware to run super fine.
Make sure you Repair Wifi
Kindly have a look at list below for each modems model.
You have to Download HWModem.sys and Place into Inferno Unitool Folder
Complete Details of each ver & steps you have to do while unlock
Model: E5330s-B2
Supported Ver: 21.210.21.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.21.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.21.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5573cs-609
Supported Ver: 21.318.xx.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E5573cs-609
Supported Ver: 21.323.00.00.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.01.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.02.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.03.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.04.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E5573cs-322
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E5573cs-322
Supported Ver: 21.323.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E8372h-153
Supported Ver: 21.313.xx.xx.306
Test Point: YES
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
Model: E8372h-153
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E8372h-153
Supported Ver: 21.321.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
Model: E5573s-320
Supported Ver: 21.315.01.00.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
Model: E5573s-320
Supported Ver: 21.315.01.01.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.