النتائج 1 إلى 1 من 1

الموضوع: VolcanoBox Inferno UniTool 1.4.1 Huawei Modems & Custom Partition by Logical Block

  1. Top | #1

    :: Super User::

    تاريخ التسجيل
    Feb 2014
    المشاركات
    3,445
    معدل تقييم المستوى
    133
    الشكر
    10,976
    تم شكره 6,017 في 1,922 مشاركة.

    افتراضي VolcanoBox Inferno UniTool 1.4.1 Huawei Modems & Custom Partition by Logical Block

    VolcanoBox Inferno UniTool 1.4.1 Huawei Modems & Custom Partition by Logical Block








    What's new in VolcanoBox Inferno UniTool 1.4.1
    Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
    Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
    Fixed some VIVO phones not detecting by selecting Auto cpu.
    How to Unlock Huawei Modems with Inferno ?
    Open Inferno UniTool 1.4.1
    Go to Huawei -> Modem
    Connect Huawei Modem in usb
    in Normal mode
    Click on Read info.
    make sure you have installed Correct Drivers
    Check software ver inside your modem.
    go to back and select Erase and then select carefully your Modem model & Firmware ver
    Firmware ver you checked from Read Info.
    Check List Below which Modem & Ver Required Erase
    Connect Test Point
    Check List Below which Modem & Ver Required Testpoint
    you can download all Test Points from here

    الروابط تظهر للاعضاء فقط


    Make Sure in Device Manger have one Huawei port !!
    Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.
    it will automatically reboot after successfully Erased
    in device manager it will show 2 ports after successfully Erased.
    Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver
    Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
    click on Next and let it patch flash.
    After Patch Flash success, please look at list what operation needed for POST PATCH Flash.
    Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
    Some modems need to repair Imei by Inferno UniTool
    Some modems need to Code calculate.
    You must update your modem Firmware to LATEST Firmware to run super fine.
    Make sure you Repair Wifi
    Kindly have a look at list below for each modems model.
    You have to Download HWModem.sys and Place into Inferno Unitool Folder




    Complete Details of each ver & steps you have to do while unlock




    Model: E5330s-B2
    Supported Ver: 21.210.21.xx.274
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E5330s-B2
    Supported Ver: 21.210.21.xx.306
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E5330s-B2
    Supported Ver: 21.210.21.xx.1065
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E5330s-B2
    Supported Ver: 21.210.25.xx.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E5330s-B2
    Supported Ver: 21.210.25.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E5330s-B2
    Supported Ver: 21.210.25.xx.1065
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E8231-S1
    Supported Ver: 22.618.13.xx.274
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E8231-S1
    Supported Ver: 22.618.13.xx.1065
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E8231-S1
    Supported Ver: 22.618.13.xx.306
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E8231-S1
    Supported Ver: 22.618.17.xx.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E8231-S1
    Supported Ver: 22.618.17.xx.1065
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E8231-S1
    Supported Ver: 22.618.17.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.






    Model: E5573cs-609
    Supported Ver: 21.318.xx.xx.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.






    Model: E5573cs-609
    Supported Ver: 21.323.00.00.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.






    Model: E8372H-608
    Supported Ver: 21.316.01.01.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.






    Model: E8372H-608
    Supported Ver: 21.316.01.02.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.






    Model: E8372H-608
    Supported Ver: 21.316.01.03.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.






    Model: E8372H-608
    Supported Ver: 21.316.01.04.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"






    Model: E5573cs-322
    Supported Ver: 21.318.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"






    Model: E5573cs-322
    Supported Ver: 21.323.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"






    Model: E8372h-153
    Supported Ver: 21.313.xx.xx.306
    Test Point: YES
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.






    Model: E8372h-153
    Supported Ver: 21.318.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"






    Model: E8372h-153
    Supported Ver: 21.321.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"






    Model: E5573s-320
    Supported Ver: 21.315.01.00.306
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.






    Model: E5573s-320
    Supported Ver: 21.315.01.01.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.

  2. 2 من أعضاء المنتدى أعجبوا بمشاركة اسكـــنـــدر


المواضيع المتشابهه

  1. VolcanoBox UniTool 1.3.6 Update for Huawei Modems, Repair Serial, Imei, Wifi etc
    بواسطة SALIM_GSM في المنتدى أخر أخبار وتحديثات GSM News & Updates
    مشاركات: 0
    آخر مشاركة: 09-09-2017, 12:36

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
Powered by vBulletin® Copyright © 2021 vBulletin Solutions, Inc. All rights reserved. Hosted by Edisoft