خبر جد جد صار
We are Happy to Announce Grand update
Volcanobox 1.9.6
Whats new ?
1- Added SonyEricsson Xperia phones for Unlock
Here is list
x10
x10i
x10a
SO-01B
E10i
U20
X8
E15
W8
E16
E16i
LT15
MK16
MT11
MT15
R800
SK17
ST15
St17
ST18
WT19
Z1
SO-01C
SO-01D
SO-03C
S51se
LT18
Keep in mind New Security is not supported !!
How To Unlock SonyEricsson Xperia Phones
1st of all you need to install drivers
How to install drivers ?
Go to Volcanobox\Drivers\SonyXperia
If you have phone which can be done without TP then open NON_TP_Drivers and install drivers OR if you have phone which can be done with TP then open TP_Drivers and install drivers
we need to connect the X10 in Flash Mode (it’s called boot mode or Download boot mode)
Remove battery from phone and insert it again
Make sure phone is Turned off condition
Press & Hold “back Button” from phone
While holding “Back Button” from phone insert/plug Usb cable into phone
******s will ask you for drivers. If it’s not install auto then give path of drivers from Volcanobox Folder (Volcanobox\Drivers\SonyXperia)
Once it’s complete You had done 1st part Now you have to unplug mobile and make it completely power on
As your mobile powered up Go to settings , Application , Enable “Usb Debugging” ( in some phones USB debugging have in different ******** for example you need to go in settings, Application, Development, or in some phone setting, Development, )
After Enable Usb debugging connect usb cable to you phone and let it’s install drivers if not driver not install then give path of drivers from Volcanobox folder.
As it’s complete you are ready to Unlock your phone.
As Drivers installed you can Start Unlocking
1. Open VolcanoBox and click on Xperia
2. Make sure There is no Simcard in your mobile
3. Make sure SD Card ( memory card ) inserted in the phone
4. Make sure your phone have not Android ver 1.6 ( you must use 2.1 or later ver of Android )
5. Make sure your phone is NOT rooted
6. Make sure your phone not have any Custom rom
7. Make sure your Internet Connection is work good and Firewall is turned-ff
8. Make sure Usb debugging mode is enabled
9. Make sure your Antivirus is turned-off
10. Cllck on Get Info from VolcanoBox software
11. Remove Battery and insert it again
12. Press and hold Back Button
13. Insert Usb cable while holding Back Button from phone
14. If everything ok you will get info about your phone
15. Now Click on Unlock
16. Repeat operation from 8 to 10
17. When software Ask you Remove Usb cable, complete power on your phone, Connect usb cable to phone, ( make sure Use Debugging is enabled )
18. Wait till software complete it’s operation.
19. Your phone is unlocked !!
Some Common Problems:
Unlock Not OK or Not Detecting Phone?
Possible causes:
1. On Vista or ******s 7 32/64 Bit ******s, VolcanoBox must run as administrator (right click , select "run as administrator")
2. Firewall or Antivirus is deleting files . Uninstall VolcanoSoftware and turn off antivirus and reinstall.
Phone shows no service after unlock:
1. Remove Battery and wait 1 minute. Insert Battery and power on phone.
Software hangs while unlocking or detecting ADB device
Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again
TEST Point pictures & this Detailed manual already inside your volcanobox. just run volcano click on Help Manual button right after connect button. then click on How to Unlock Xperia Phones. you will see all details.
2- Coolsand Read / Write / Format More Stable then ever
Volcano Box introduced Boot_B for Coolsand. this is very stable version ever before. i want to share some thing about Coolsand.
Now Coolsand have two different Boots
1- built-in Auto
2- built-in BOOT_B
2- Built-in Boot_B
is fully Auto you don't need to select any thing. just make sure you have selected Boot_B from Boot and Auto from Flash id. if you want to format also you don't need to write any format address. We had tested lot of phones for formatting with 4mb , 8mb , 16mb, and we success. You can see reports from here
Beta Test Volcano Box v1.9.6 Game ON
If somehow you still face some problem please report us on forum or send me pm
1- Built-in AUTO
This is Auto and Manual both. if you select Auto from boot and Auto from Flash id it will work auto. but if somehow you want to do manual work then you can select Auto from boot and Select your DESIRE FLASH ID from flash id and you can do work.
This is still BETA we research lot of new things and we are working on it soon you guys will have Fully Auto and Fully Bugs free ver and Fully Supported coolsand phones. At the moment we support maximum cpu and maximum flash id which still other not do.
3- Coolsand Read USER Area
4- Coolsand Write USER AREA
Read & Write User Area is for repair signals in coolsand phones, Read & Write user area is for repair Usercode problems in Coolsand phones, Read & Write user area is for repair blinking problems, in other words read & write user area is very use full. in other words you can say it's NV. but it have more than NV area
5- Added Write Flash Security for Coolsand
1. In COOLSAND BOOT_B you try to write any file and volcano say to "you Writing this file is risky" This mean your readed flash is not good and volcano will not write your flash file. this is for avoid after write flash mobile dead. if you still want to write this flash file you can use built-in AUTO and select your desire flash id Volcano will write flash file but not sure your mobile will come alive or not or your mobile become dead.
6- Added More Manuals in Volcano box
7- Adjust Coolsand Find pass algorithm
8- Added Alcatel MTK Android Phones for Direct Unlock & Read Code ( Sp Unlock )
here is list
OT-S600
OT-S710
OT-S800
OT-J610
OT-S500
OT-S810
OT-S820
OT-S850
We are Happy to Announce Grand update
Volcanobox 1.9.6
Whats new ?
1- Added SonyEricsson Xperia phones for Unlock
Here is list
x10
x10i
x10a
SO-01B
E10i
U20
X8
E15
W8
E16
E16i
LT15
MK16
MT11
MT15
R800
SK17
ST15
St17
ST18
WT19
Z1
SO-01C
SO-01D
SO-03C
S51se
LT18
Keep in mind New Security is not supported !!
How To Unlock SonyEricsson Xperia Phones
1st of all you need to install drivers
How to install drivers ?
Go to Volcanobox\Drivers\SonyXperia
If you have phone which can be done without TP then open NON_TP_Drivers and install drivers OR if you have phone which can be done with TP then open TP_Drivers and install drivers
we need to connect the X10 in Flash Mode (it’s called boot mode or Download boot mode)
Remove battery from phone and insert it again
Make sure phone is Turned off condition
Press & Hold “back Button” from phone
While holding “Back Button” from phone insert/plug Usb cable into phone
******s will ask you for drivers. If it’s not install auto then give path of drivers from Volcanobox Folder (Volcanobox\Drivers\SonyXperia)
Once it’s complete You had done 1st part Now you have to unplug mobile and make it completely power on
As your mobile powered up Go to settings , Application , Enable “Usb Debugging” ( in some phones USB debugging have in different ******** for example you need to go in settings, Application, Development, or in some phone setting, Development, )
After Enable Usb debugging connect usb cable to you phone and let it’s install drivers if not driver not install then give path of drivers from Volcanobox folder.
As it’s complete you are ready to Unlock your phone.
As Drivers installed you can Start Unlocking
1. Open VolcanoBox and click on Xperia
2. Make sure There is no Simcard in your mobile
3. Make sure SD Card ( memory card ) inserted in the phone
4. Make sure your phone have not Android ver 1.6 ( you must use 2.1 or later ver of Android )
5. Make sure your phone is NOT rooted
6. Make sure your phone not have any Custom rom
7. Make sure your Internet Connection is work good and Firewall is turned-ff
8. Make sure Usb debugging mode is enabled
9. Make sure your Antivirus is turned-off
10. Cllck on Get Info from VolcanoBox software
11. Remove Battery and insert it again
12. Press and hold Back Button
13. Insert Usb cable while holding Back Button from phone
14. If everything ok you will get info about your phone
15. Now Click on Unlock
16. Repeat operation from 8 to 10
17. When software Ask you Remove Usb cable, complete power on your phone, Connect usb cable to phone, ( make sure Use Debugging is enabled )
18. Wait till software complete it’s operation.
19. Your phone is unlocked !!
Some Common Problems:
Unlock Not OK or Not Detecting Phone?
Possible causes:
1. On Vista or ******s 7 32/64 Bit ******s, VolcanoBox must run as administrator (right click , select "run as administrator")
2. Firewall or Antivirus is deleting files . Uninstall VolcanoSoftware and turn off antivirus and reinstall.
Phone shows no service after unlock:
1. Remove Battery and wait 1 minute. Insert Battery and power on phone.
Software hangs while unlocking or detecting ADB device
Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again
TEST Point pictures & this Detailed manual already inside your volcanobox. just run volcano click on Help Manual button right after connect button. then click on How to Unlock Xperia Phones. you will see all details.
2- Coolsand Read / Write / Format More Stable then ever
Volcano Box introduced Boot_B for Coolsand. this is very stable version ever before. i want to share some thing about Coolsand.
Now Coolsand have two different Boots
1- built-in Auto
2- built-in BOOT_B
2- Built-in Boot_B
is fully Auto you don't need to select any thing. just make sure you have selected Boot_B from Boot and Auto from Flash id. if you want to format also you don't need to write any format address. We had tested lot of phones for formatting with 4mb , 8mb , 16mb, and we success. You can see reports from here
Beta Test Volcano Box v1.9.6 Game ON
If somehow you still face some problem please report us on forum or send me pm
1- Built-in AUTO
This is Auto and Manual both. if you select Auto from boot and Auto from Flash id it will work auto. but if somehow you want to do manual work then you can select Auto from boot and Select your DESIRE FLASH ID from flash id and you can do work.
This is still BETA we research lot of new things and we are working on it soon you guys will have Fully Auto and Fully Bugs free ver and Fully Supported coolsand phones. At the moment we support maximum cpu and maximum flash id which still other not do.
3- Coolsand Read USER Area
4- Coolsand Write USER AREA
Read & Write User Area is for repair signals in coolsand phones, Read & Write user area is for repair Usercode problems in Coolsand phones, Read & Write user area is for repair blinking problems, in other words read & write user area is very use full. in other words you can say it's NV. but it have more than NV area
5- Added Write Flash Security for Coolsand
1. In COOLSAND BOOT_B you try to write any file and volcano say to "you Writing this file is risky" This mean your readed flash is not good and volcano will not write your flash file. this is for avoid after write flash mobile dead. if you still want to write this flash file you can use built-in AUTO and select your desire flash id Volcano will write flash file but not sure your mobile will come alive or not or your mobile become dead.
6- Added More Manuals in Volcano box
7- Adjust Coolsand Find pass algorithm
8- Added Alcatel MTK Android Phones for Direct Unlock & Read Code ( Sp Unlock )
here is list
OT-S600
OT-S710
OT-S800
OT-J610
OT-S500
OT-S810
OT-S820
OT-S850
التعديل الأخير:
