
الأسباب الرئيسية لعمل هذا الموضوع تبادل للخبرات من باب أولى لأن المنتدى أنشئ لهذا الغرض
كذلك طرح طرق الفلاش لموديلات قد توجد فيها خطوات قد تخفى على الأخرين ويمكن توضيحها في هذا الموضوع
يمنع الردود في الموضوع لأنه مخصص فقط للتجارب
أي رد يحذف مباشرة
التعديل الأخير تم بواسطة DZ-Developer ; 08-03-2013 الساعة 17:30
Welcome to Octopus Box Samsung software version 1.7.6 Selected firmware file: C3332JPKK5_BSY.oct ----------------------------------------------------------------------------------- Platform: Samsung Infineon Selected model: GT-C3332 Selected port: COM7 Baud rate: 921600 Phone must be OFF, and battary must be fully charged Please, connect the UART cable, Reconnect the battery, press Power button Connecting... Phone found. Sending loaders... Sending preloader... Preloader send successfully Sending mainloader... Mainloader send successfully Writing firmware... Erasing Full Flash... Full Flash erase successfully. Writing "C3332JPKK5_psi"... Writing "C3332JPKK5_psi" done! Writing "C3332JPKK5_slb"... Writing "C3332JPKK5_slb" done! Writing "C3332JPKK5_BSY part 0"... Writing "C3332JPKK5_BSY" done! Writing "C3332JPKK5_BSY part 1"... Writing "C3332JPKK5_BSY" done! Writing "C3332JPKK5_CDS"... Writing "C3332JPKK5_CDS" done! Writing "C3332OJPKK5_CSC"... Writing "C3332OJPKK5_CSC" done! Firmware Write successfully.
----------------------------------------------------------------------------------- Platform: Samsung Swift Selected model: GT-E1200M Selected port: COM7 Baud rate: 115200 Please, connect phone to UART cable, insert battery and press power button for 3 seconds. Phone found. Sending preloader... Preloader send successfully Sending mainloader... Mainloader send successfully Searching patch area, please wait... Writing patch... Patch successfully write. Rebooting phone Connecting... Phone in TAT mode. Reading info, please wait... Phone IMEI A: 35381905211475 SW Version: E1200MPYL Phone SN : RV1C757HMX Reading codes... Freeze lock: 78348690 Net lock: 00000000 Sim lock: 00000000 Phone lock: 00000000 Sp lock: 00000000
Welcome to Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- Platform: Samsung Swift Selected model: GT-C3300K Selected port: COM7 Baud rate: 115200 Please, connect phone to UART cable, insert battery and press power button for 3 seconds. Connecting... Phone in TAT mode. Reading info, please wait... Phone IMEI A: 35571804488160 SW Version: C3300KAFK Bluetooth MAC: A07591E8559B Phone SN : RQGB178088 Reading codes... Deactivating MSL... MSL deactivate successfully Freeze lock: 66028850 Net lock: 38049100 Sim lock: 00000000 Phone lock: 00000000 Sp lock: 00000000
Welcome to Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-S5360 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When the message appears press "Yes". 5. Connect USB cable to the phone. 6. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Broadcom Selected port: COM7 Selected model: GT-S5360 Connecting to phone on COM135 Detected phone model: GT-S5360 SW Version: S5360JPLA1/EUR_CSC/S5360XXLA2/S5360JPLA1 HW Version: GT-S5360MASTMC Phone IMEI A: 352936-05-302814-7 ADB server killed. Firmware compiled date: Sat Jan 14 06:54:01 KST 2012 Android version: 2.3.6 (GINGERBREAD) Phone found. If Screen lock removed and phone not found by software then do next steps: Go to Menu->Settings->Applications->Development. Turn on "USB Debugging" option. When message is appear press "Yes". Searching for a phone. Please wait... Firmware compiled date: Sat Jan 14 06:54:01 KST 2012 Android version: 2.3.6 (GINGERBREAD) Detecting Screen Lock parameters... Screen Lock detected: Pattern Lock Resetting Screen Lock... Phone will restart now Reset Screen Lock successfully completed.
Welcome to Octopus Box Samsung software version 1.8.4 ----------------------------------------------------------------------------------- To connect GT-I9100 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial ******** 6. Enter "*#7284#" number. 7. Set "USB" radio button to "PDA" value. 8. Close ******** 9. Go to dial ******** 10. Enter "*#9090#" number. 11. Set "Diag config" to "USB" value. 12. Restart phone. 13. Press "Read Info" in software. Selected firmware file: I9100XWLSD_I9100OJVLS6_I9100XXLS8 _HOME.oct Please switch your phone to the download mode and connect it to a PC. To put GT-I9100 phone into download mode you have to perform the following steps: 1. Reconnect phone battery. 2. Press and hold "Volume - " + "Home" + "Power" buttons. 3. When phone turns on press "Volume+" button. Found phone on Firmware write started. Writing PIT section... PIT section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing FACTORYFS section... FACTORYFS section has been written successfully. Writing PARAM section... PARAM section has been written successfully. Writing SBL1 section... SBL1 section has been written successfully. Writing KERNEL section... KERNEL section has been written successfully. Writing MODEM section... MODEM section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Firmware writing successfully completed.
Welcome to Octopus Box Samsung software version 1.8.9 -------------------------------------------------------------------- --------------- Platform: Samsung Broadcom Selected port: COM135 Selected model: GT-S5300 Connecting to phone on COM135 Detected phone model: GT-S5300 SW Version: S5300JPLF3/S5300OJPLE2/S5300XXLE4/S5300JP LF3 HW Version: GT-S5300ZWATMC Phone IMEI A: 353170-05-910100-0 Firmware compiled date: Mon Jun 25 10:24:38 KST 2012 Phone SN: R21C730Z8VK Android version: 2.3.6 (GINGERBREAD) Phone found. If Screen lock removed and phone not found by software then do next steps: Go to Menu->Settings->Applications->Development. Turn on "USB Debugging" option. When message is appear press "Yes". Searching for a phone. Please wait... Firmware compiled date: Mon Jun 25 10:24:38 KST 2012 Phone SN: R21C730Z8VK Android version: 2.3.6 (GINGERBREAD) Detecting Screen Lock parameters... Screen Lock detected: Password Lock Resetting Screen Lock... Phone will restart now Reset Screen Lock successfully completed.
Welcome to Octopus Box Samsung software version 1.9.2 ----------------------------------------------------------------------------------- To connect GT-N7105T phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Developer options. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial ******** 6. Enter "*#7284#" number. 7. Set "UART" radio button to "MODEM" value. 8. Go to "Qualcomm USB Settings". 9. Select "RNDIS+DM+MODEM". 10. Close ******** 11. Go to dial ******** 12. Enter "*#9090#" number. 13. Select "DM/UM over HS-USB". 14. Restart phone. 15. Press "Read Info" in software. Selected firmware file: N7105XXDMB2_N7105XEFDMB2_N7105XXDLL5_HOME.oct Please switch your phone to the download mode and connect it to a PC. To put GT-N7105T phone into download mode you have to perform the following steps: 1. Reconnect phone battery. 2. Press and hold "Volume - " + "Home" + "Power" buttons. 3. When phone turns on press "Volume+" button. Found phone on Firmware write started. Writing BOOTLOADER section... BOOTLOADER section has been written successfully. Writing TZSW section... TZSW section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing RADIO section... RADIO section has been written successfully. Firmware writing successfully completed.
Welcome to Octopus Box Samsung software version 1.9.3 Selected firmware file: S5830iJPLB1 Android 2.3.6.oct Please switch your phone to the download mode and connect it to a PC. To put GT-S5830I phone into download mode you have to perform the following steps: 1. Reconnect phone battery. 2. Press and hold "Volume - " + "Home" + "Power" buttons. 3. When phone turns on press "Volume+" button. Found phone on Firmware write started. Writing PIT section... PIT section has been written successfully. Writing bcm_boot section... bcm_boot section has been written successfully. Writing umts_cal section... umts_cal section has been written successfully. Writing sysparm_dep section... sysparm_dep section has been written successfully. Writing loke section... loke section has been written successfully. Writing boot section... boot section has been written successfully. Writing system section... system section has been written successfully. Writing userdata section... userdata section has been written successfully. Writing param_lfs section... param_lfs section has been written successfully. Writing modem section... modem section has been written successfully. Writing cache section... cache section has been written successfully. Firmware writing successfully completed.
Welcome to Octoplus/Octopus Box Samsung software version 1.1.8 ----------------------------------------------------------------------------------- To connect GT-B7510 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial ******** 6. Enter "*#9090#" number. 7. Set "Diag config" to "USB" value. 8. Restart phone. 9. Press "Read Info" in software. Selected firmware file: B7510JPKP6_B7510OJPKP5_B7510JPKP5_HOME.oct Please switch your phone to the download mode and connect it to a PC. To put GT-B7510 phone into download mode you have to perform the following steps: 1. Reconnect phone battery. 2. Press and hold "Volume-" +"Power"+''Home" buttons. Searching for a phone. Please wait... Found phone on Firmware write started. Writing mibib section... mibib section has been written successfully. Writing qcsbl section... qcsbl section has been written successfully. Writing oemsbl section... oemsbl section has been written successfully. Writing amss section... amss section has been written successfully. Writing arm11boot section... arm11boot section has been written successfully. Writing boot.img section... boot.img section has been written successfully. Writing recovery.img section... recovery.img section has been written successfully. Writing system.rfs section... system.rfs section has been written successfully. Writing csc.rfs section... csc.rfs section has been written successfully. Please, restart the phone to apply changes Firmware writing successfully completed.