النتائج 1 إلى 3 من 3

الموضوع: تصليح البوت اسمسوق j200h

  1. Top | #1

    عضو
    تاريخ التسجيل
    Dec 2015
    المشاركات
    80
    معدل تقييم المستوى
    6
    الشكر
    3
    تم شكره 16 في 12 مشاركة.

    افتراضي تصليح البوت اسمسوق j200h

    تصليح البوت اسمسوق j200h
    لقد تم تصليح البوت بنجاح و استخدام 03 فلاشات مختلفة
    و لكن مازال الهاتف على حاله لا يدخل في الدنولود مود
    للاضافة الهاتف جديد و لا يحتوي على مشكلة هاردوارد hd
    لقد تم تضيع البوة عن طريق الفلاش
    اليكم معطيات تصليح البوة عل الموديس بوكس
    Please disconnect battery and USB cable.

    Model Settings:
    Interface : eMMC
    Brand : Samsung
    Model : SM-J200H
    SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf
    Voltage : 1.8V
    Bus Mode : 1
    Bus speed : Auto

    Connecting...
    Device : Hynix eMMC H8G4t!
    Page size : 512 B
    Block size : 512 B
    Block count : 15269888
    Size : 7.28 GB
    ---------------------------------------------------------------
    CID Info

    CID : 90014A4838473474210128259E3F53A7
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H8G4t!
    Product revision : 0.1
    Product serial number : (hex) 28259E3F
    Manufacturing date : 05/2016
    ---------------------------------------------------------------
    CSD Info

    CSD : D07F01320F5903FFFFFFFFEF8A400013
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info

    Revision 1.7 (for MMC v5.0, v5.01)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes

    Partition config : 00001000
    Boot partition enable : Boot partition 1 (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)

    Boot bus conditions : 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)

    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 3817472 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x0
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b

    ---------------------------------------------------------------Searching Android build info...Ok

    Disk/Image size : d2000000 bytes
    Device sector size : 512 bytes
    Partition offset : 638976
    Number of sectors : 3072000
    Device Manufacturer : samsung
    Device Platform : sc8830
    Build ID : LMY48B
    Display Build ID : LMY48B.J200HXXU0AOJ3
    Release ID : 5.1.1
    Device Model : SM-J200H
    Device Name : j23gdd
    Architecture ABI : armeabi-v7a
    Architecture ABI2 : armeabi
    Architecture ABI List : armeabi-v7a,armeabi
    Build Description : j23gdd-user 5.1.1 LMY48B J200HXXU0AOJ3 release-keys

    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4t!_30_07_2017_17_19_42.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 1.4.0; FW: 1.20.
    P00: GPT (00000000, 00002000)
    P01: SBOOT (00002000, 00001000)
    P02: SBOOT2 (00003000, 00001000)
    P03: wfixnv1 (00004000, 00000800)
    P04: wfixnv2 (00004800, 00000800)
    P05: tdfixnv1 (00005000, 00000800)
    P06: tdfixnv2 (00005800, 00000800)
    P07: WDSP (00006000, 00002000)
    P08: MODEM (00008000, 00004000)
    P09: MODEM2 (0000C000, 00004000)
    P10: TDDSP (00010000, 00002000)
    P11: FOTA_SIG (00012000, 00000800)
    P12: wruntimenv1 (00012800, 00000800)
    P13: wruntimenv2 (00013000, 00000800)
    P14: tdruntimenv1 (00013800, 00000800)
    P15: tdruntimenv2 (00014000, 00000800)
    P16: PARAM (00014800, 00001000)
    P17: efs (00015800, 0000A000)
    P18: prodnv (0001F800, 00002800)
    P19: RESERVED2 (00022000, 00001000)
    P20: KERNEL (00023000, 00008000)
    P21: RECOVERY (0002B000, 00008000)
    P22: PERSISTENT (00033000, 00000800)
    P23: persdata (00033800, 00004800)
    P24: CACHE (00038000, 00064000)
    P25: SYSTEM (0009C000, 002EE000)
    P26: HIDDEN (0038A000, 0000F000)
    P27: userdata (00399000, 00AF0000)
    Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf".
    Write data verification is enabled.

    Switched to boot area partition 1.
    Writing BOOT1 partition... Done.

    Switched to boot area partition 2.
    Writing BOOT2 partition... Done.

    Switched to user area.
    Writing GPT partition... Done.
    Writing SBOOT partition... Done.
    Writing SBOOT2 partition... Done.
    Writing wfixnv1 partition... Done.
    Writing wfixnv2 partition... Done.
    Writing tdfixnv1 partition... Done.
    Writing tdfixnv2 partition... Done.
    Writing WDSP partition... Done.
    Writing MODEM partition... Done.
    Writing MODEM2 partition... Done.
    Writing TDDSP partition... Done.
    Writing FOTA_SIG partition... Done.
    Writing wruntimenv1 partition... Done.
    Writing wruntimenv2 partition... Done.
    Writing tdruntimenv1 partition... Done.
    Writing tdruntimenv2 partition... Done.
    Writing PARAM partition... Done.
    Writing efs partition... Done.
    Writing prodnv partition... Done.
    Writing RESERVED2 partition... Done.
    Writing KERNEL partition... Done.
    Writing RECOVERY partition... Done.
    Writing PERSISTENT partition... Done.
    Writing persdata partition... Done.

    Smart Repair is successfully complete.
    SW: 1.4.0; FW: 1.20.
    Disconnected.
    Report Post

    بعد اليجابة من طرف القائمين على البوكس قمت بعملية اخرى
    Welcome to Medusa Pro Software version 1.4.0.
    Started.
    Reader #0: Alcor Micro USB Smart Card Reader 0

    Please disconnect battery and USB cable.

    Model Settings:
    Interface : eMMC
    Brand : Samsung
    Model : SM-J200H
    SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf
    Voltage : 1.8V
    Bus Mode : 1
    Bus speed : Auto

    Connecting...
    Device : Hynix eMMC H8G4t!
    Page size : 512 B
    Block size : 512 B
    Block count : 15269888
    Size : 7.28 GB
    ---------------------------------------------------------------
    CID Info

    CID : 90014A4838473474210128259E3F53A7
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H8G4t!
    Product revision : 0.1
    Product serial number : (hex) 28259E3F
    Manufacturing date : 05/2016
    ---------------------------------------------------------------
    CSD Info

    CSD : D07F01320F5903FFFFFFFFEF8A400013
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info

    Revision 1.7 (for MMC v5.0, v5.01)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes

    Partition config : 00001000
    Boot partition enable : Boot partition 1 (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)

    Boot bus conditions : 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)

    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 3817472 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x0
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b

    ---------------------------------------------------------------Searching Android build info...Ok

    Disk/Image size : d2000000 bytes
    Device sector size : 512 bytes
    Partition offset : 638976
    Number of sectors : 3072000
    Device Manufacturer : samsung
    Device Platform : sc8830
    Build ID : LMY48B
    Display Build ID : LMY48B.J200HXXU0AOJ3
    Release ID : 5.1.1
    Device Model : SM-J200H
    Device Name : j23gdd
    Architecture ABI : armeabi-v7a
    Architecture ABI2 : armeabi
    Architecture ABI List : armeabi-v7a,armeabi
    Build Description : j23gdd-user 5.1.1 LMY48B J200HXXU0AOJ3 release-keys

    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4t!_01_08_2017_23_10_50.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 1.4.0; FW: 1.20.
    P00: GPT (00000000, 00002000)
    P01: SBOOT (00002000, 00001000)
    P02: SBOOT2 (00003000, 00001000)
    P03: wfixnv1 (00004000, 00000800)
    P04: wfixnv2 (00004800, 00000800)
    P05: tdfixnv1 (00005000, 00000800)
    P06: tdfixnv2 (00005800, 00000800)
    P07: WDSP (00006000, 00002000)
    P08: MODEM (00008000, 00004000)
    P09: MODEM2 (0000C000, 00004000)
    P10: TDDSP (00010000, 00002000)
    P11: FOTA_SIG (00012000, 00000800)
    P12: wruntimenv1 (00012800, 00000800)
    P13: wruntimenv2 (00013000, 00000800)
    P14: tdruntimenv1 (00013800, 00000800)
    P15: tdruntimenv2 (00014000, 00000800)
    P16: PARAM (00014800, 00001000)
    P17: efs (00015800, 0000A000)
    P18: prodnv (0001F800, 00002800)
    P19: RESERVED2 (00022000, 00001000)
    P20: KERNEL (00023000, 00008000)
    P21: RECOVERY (0002B000, 00008000)
    P22: PERSISTENT (00033000, 00000800)
    P23: persdata (00033800, 00004800)
    P24: CACHE (00038000, 00064000)
    P25: SYSTEM (0009C000, 002EE000)
    P26: HIDDEN (0038A000, 0000F000)
    P27: userdata (00399000, 00AF0000)

    Selected pit file: C:/Users/AEH/Desktop/J23G_EUR_OPEN/J23G_EUR_OPEN.pit

    Open file "D:/J200HXXU0APG2_J200HOXE0APG1/J200HXXU0APG2_J200HOXE0APG1_J200HXXU0APC1_HOME.tar .md5".


    Selected pit file: C:/Users/AEH/Desktop/J23G_EUR_OPEN/J23G_EUR_OPEN.pit

    Open file "D:/J200HXXU0APG2_J200HOXE0APG1/J200HXXU0APG2_J200HOXE0APG1_J200HXXU0APC1_HOME.tar .md5".


    Selected pit file: C:/Users/AEH/Desktop/J23G_EUR_OPEN/J23G_EUR_OPEN.pit

    Open file "D:/J200HXXU0APG2_J200HOXE0APG1/J200HXXU0APG2_J200HOXE0APG1_J200HXXU0APC1_HOME.tar .md5".


    Writing MBR...Done.
    Writing primary GPT...Done.
    Writing secondary GPT...Done.
    Writing PIT
    Write data verification is enabled.
    Writing. Please wait...

    Switched to boot area partition 1.
    Writing partition BOOT... Done.

    Switched to user area.
    Writing partition SBOOT... Done.
    Writing partition SBOOT2... Done.
    Writing partition WDSP... Done.
    Writing partition MODEM... Done.
    Writing partition KERNEL... Done.
    Writing partition RECOVERY... Done.
    Writing partition CACHE... Done.
    Writing partition SYSTEM... Done.
    Writing partition HIDDEN... Done.
    Writing is finished.
    SW: 1.4.0; FW: 1.20.
    Report Post
    نفس المشكلة الهاتف ما زال منطفء

  2. 2 من أعضاء المنتدى أعجبوا بمشاركة mustapha23


  3. Top | #2

    عضو مشارك
    تاريخ التسجيل
    Mar 2013
    المشاركات
    198
    معدل تقييم المستوى
    14
    الشكر
    227
    تم شكره 508 في 137 مشاركة.

    افتراضي

    فات علي نفس المشكل ولم يحل
    استطغت الدخول الى ال=اكرة واستخراج الملفات
    لكن الهاتف لم يشتغل اظن ان المشكل في emmc

  4. Top | #3

    عضو فعال
    تاريخ التسجيل
    Feb 2014
    الإقامة
    batna
    المشاركات
    468
    معدل تقييم المستوى
    12
    الشكر
    672
    تم شكره 339 في 178 مشاركة.

    افتراضي

    يا الهي

المواضيع المتشابهه

  1. استفسار؟ في ما يخص تصليح البوت بالجيتاق
    بواسطة zakaria7O في المنتدى قسم بوكسات الجتاق JTAG
    مشاركات: 0
    آخر مشاركة: 24-03-2017, 18:58
  2. مساعدة تصليح الايمي سامسونج j200h mt5272
    بواسطة mobile82 في المنتدى قسم ميركل بوكس Miracle Box
    مشاركات: 3
    آخر مشاركة: 27-01-2017, 21:13
  3. تصليح البوت للهاتف lgd 801
    بواسطة ZEBBAR03 في المنتدى قسم Medusa Pro box / Octoplus Pro JTAG
    مشاركات: 1
    آخر مشاركة: 06-01-2017, 15:31
  4. مساعدة تصليح البوت n7100
    بواسطة Nadjib-Serv في المنتدى قسم فلاشات السامسونج Samsung
    مشاركات: 8
    آخر مشاركة: 20-03-2016, 11:50
  5. بالفديو شرح تصليح البوت
    بواسطة batmemo في المنتدى قسم الريف بوكس RIFF BOX
    مشاركات: 2
    آخر مشاركة: 16-12-2013, 13:56

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
Powered by vBulletin® Copyright © 2021 vBulletin Solutions, Inc. All rights reserved. Hosted by Edisoft