Infinity-Box Chinese Miracle-2 MTK/MediaTek : Supplementary files package for v1.58

[MBtech]

انتظرنا تحديث أقوى و لكن تمخض الجبل فولد فأرا.. و تمخض العملاق فأتانا بهذا التحديث :hehe:

Infinity-Box Chinese Miracle-2 MTK/MediaTek : Supplementary files package for v1.58
- Boot package updated

- Ini updated, new devices are supported:
Original Nokia 3 phone ( Unique! )
Base Secure Phones
Huawei (TITx and similar)

Select "SP : Select model" and choose need mode/model

- Support package
Lot of new DRAM and eMMC config included

How to use:
- Just install files and you will see boot selection menu

How to install:
1. Download from support area installer InfinityBox_update_CM2MTK_Supplementary-files-package_v1.58.7z
2. Install it, you must select folder where you already have CM2MTK v1.58 instlled

http://rgho.st/7lTL8mFJf

 

[MBtech]

و هنا بعض التعليمات المهمة بخصوص Nokia 3 و طريقة التعامل معه

1. NEVER MAKE FLASH ERASE!!!! You will kill device!!!
2. NOT update PRELOADER ( tick SKIP Preloader ) and NOT erase device ( untick Flash Pre-erase )

That make you 100% save from battery, connection, weather on Venus and etc.


Identify :

Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 514E011336394A32BD0410522B228A7C
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
[eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0xB37B1BC7646A2D2B89C1940E3AD51514
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Unknown
ProdName : Unknown
ProdModel : Heart
Device : Unknown
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96

SECURITY :
IMEI_SW [1] : 3560xxxxxx
IMEI_SW [2] : 3560xxxxxx
BTMAC Addr : CC9F7A309166
WiFi MAC : CC9F7A309167

Done!
Elapsed: 00:00:10
Reconnect Power/Cable![/CODE]

Reset settings ( locks, frp and rest ) :

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 514E011336394A32BD0410522B228A7C
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
[eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:45
Reconnect Power/Cable!

Repair Security :

Operation : Repair Security [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 514E011336394A32BD0410522B228A7C
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
[eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


IMEI [00] : 35604xxxxxxx
IMEI [01] : 35604xxxxxxx

Set IMEI [00] : 990000990909097
Set IMEI [01] : 990909090909098
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 27 ]
Sync...
Repair done!

Done!
Elapsed: 00:00:42
Reconnect Power/Cable!

Verify Result :

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 514E011336394A32BD0410522B228A7C
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
[eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Unknown
ProdName  : Unknown
ProdModel : Heart
Device    : Unknown
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96

SECURITY : 
IMEI_SW [1] : 990000990909097
IMEI_SW [2] : 990909090909098
BTMAC Addr  : CC9F7A309166
WiFi MAC    : CC9F7A309167

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

Read Firmware :

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 514E011336394A32BD0410522B228A7C
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
[eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Unknown
ProdName  : Unknown
ProdModel : Heart
Device    : Unknown
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96

[Read Ok] : preloader_ne1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : box.img
[Read Ok] : sys_info.img
[Read Ok] : hidden.img
[Read Ok] : cda.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / ne1 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3434 MiB
Scatter saved to : E:\MT6737M__Unknown__Heart__Unknown__7.0__alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96\

All done!

Done!
Elapsed: 00:09:44
Reconnect Power/Cable!

Flash Firmware :

Scatter Load Ok , BaseBand : MT6737 , Project : ne1 , Storage : EMMC
Files found : 15 , Set to Flash : 14
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Unknown
Device Model   : Unknown
Device CPU     : MT6737M
Device IntName : Unknown
Device Version : 7.0
Device Compile : 12.04.2017 4:54:56
Device Project : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96
Device ExtInfo : Heart
Ready to Flash!
 
Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 514E011336394A32BD0410522B228A7C
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
[eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6737 , Project : ne1 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Disabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3779 mV
BL : BatteryLevel Ok

Backup enabled!
Backup saved : Backup\Flash\13014E51324A3936521004BD7C8A242B\

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request! 
PartCount : 001B
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : TEE1
Image Flash Ok
Flash now : TEE2
Image Flash Ok
Flash now : BOX
Image Flash Ok
Flash now : SYS_INFO
Image Flash Ok
Flash now : HIDDEN
Image Flash Ok
Flash now : CDA
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:06:51

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : TEE1
Verify Passed : TEE2
Verify Passed : BOX
Verify Passed : SYS_INFO
Verify Passed : HIDDEN
Verify Passed : CDA
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:02:17

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:09:26
Reconnect Power/Cable!

[/COLOR][/COLOR][/QUOTE]

 

[Amro Lamri Lamr]

ما فائدة هذا التحديث وميزته

 

[bah999]

ما فائدة هذا التحديث وميزته

Nokia 3 الجديد من نوكيا اندرويد

http://www.gsmarena.com/nokia_3-8572.php

 

[Docteur Mobile]

فريق قوي يستحق التقدير و الاحترام.

 

[FaYsSaL_GsM]

LePilami

في هذا التحديث أراد أن يبرهن أشياء كثيرة
لأنه ليس لكل تغيير شيئ بسيط يتغير إسم تحديث

صحيح هنــاك أنواع غير مدعومة لكنه يعد من أفضل البرامج المدفوعة لحد الأن ومن فريق محترف

 

[Docteur Mobile]

كلامك كافي شافي، شكرا أخي فيصل.

LePilami

في هذا التحديث أراد أن يبرهن أشياء كثيرة
لأنه ليس لكل تغيير شيئ بسيط يتغير إسم تحديث

صحيح هنــاك أنواع غير مدعومة لكنه يعد من أفضل البرامج المدفوعة لحد الأن ومن فريق محترف

 

[boudj67]

فريق قوي يستحق التقدير و الاحترام.

 

[syfou]

أقوى فريق حاليا رفقة الأوكتوبليس

 

[faycal44000]

بالتاكيد ايها الاخوة اقوى فريق محترف باتم معنى الكلمة

 

[Abou Houssam]

فريق رائع محترف بالتوفيق له

 

[yahya att]

السلام عليكم و رحمة الله و بركاته
إخواني راني جديد و حاب نتعلم من فضلكم أفيدوني ، ماهو الأنفميتي بوكس ؟ هل هو جهاز أم برنامج ؟ إذا كان جهاز فهل هو متوفر بمحلات الإعلام الآلي و كم ثمه ؟
بارك الله فيكم

 

[yahya att]

السلام عليكم ، اخي بما أنك تقطن بنفس المدينة التي أقطن بها من أين يمكنني إقتناء هذا الجهاز سي أم 2؟ وكم ثمنه ؟ [size]

 

[عبد الصمد عبد العزيز]

السلام عليكم و رحمة الله و بركاته
إخواني راني جديد و حاب نتعلم من فضلكم أفيدوني ، ماهو الأنفميتي بوكس ؟ هل هو جهاز أم برنامج ؟ إذا كان جهاز فهل هو متوفر بمحلات الإعلام الآلي و كم ثمه ؟
بارك الله فيكم

و عليكم السلام خويا هذا بوكس تفلاشي بيه