صفحة 1 من 2 12 الأخيرةالأخيرة
النتائج 1 إلى 10 من 14

الموضوع: Infinity-Box Chinese Miracle-2 MTK/MediaTek : Supplementary files package for v1.58

  1. Top | #1

    عضو اساسي
    تاريخ التسجيل
    Feb 2016
    الإقامة
    SBA
    المشاركات
    736
    معدل تقييم المستوى
    17
    الشكر
    544
    تم شكره 630 في 287 مشاركة.

    افتراضي Infinity-Box Chinese Miracle-2 MTK/MediaTek : Supplementary files package for v1.58

    انتظرنا تحديث أقوى و لكن تمخض الجبل فولد فأرا.. و تمخض العملاق فأتانا بهذا التحديث


    Infinity-Box Chinese Miracle-2 MTK/MediaTek : Supplementary files package for v1.58
    - Boot package updated

    - Ini updated, new devices are supported:
    Original Nokia 3 phone ( Unique! )
    Base Secure Phones
    Huawei (TITx and similar)

    Select "SP : Select model" and choose need mode/model

    - Support package
    Lot of new DRAM and eMMC config included

    How to use:
    - Just install files and you will see boot selection menu

    How to install:
    1. Download from support area installer InfinityBox_update_CM2MTK_Supplementary-files-package_v1.58.7z
    2. Install it, you must select folder where you already have CM2MTK v1.58 instlled

    الروابط تظهر للاعضاء فقط


  2. 4 من أعضاء المنتدى أعجبوا بمشاركة MBtech


  3. Top | #2

    عضو اساسي
    تاريخ التسجيل
    Feb 2016
    الإقامة
    SBA
    المشاركات
    736
    معدل تقييم المستوى
    17
    الشكر
    544
    تم شكره 630 في 287 مشاركة.

    افتراضي

    و هنا بعض التعليمات المهمة بخصوص Nokia 3 و طريقة التعامل معه

    1. NEVER MAKE FLASH ERASE!!!! You will kill device!!!
    2. NOT update PRELOADER ( tick SKIP Preloader ) and NOT erase device ( untick Flash Pre-erase )

    That make you 100% save from battery, connection, weather on Venus and etc.


    Identify :


    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x05000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : LOCKED with CERT
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x9B
    NAND Flash : NOT INSTALLED
    eMMC Flash : 514E011336394A32BD0410522B228A7C
    [WARNING] : MEMORY_eMMC_VALIDATE_FAILED
    Initialize Memory ...
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x13 , OEM : 014E
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
    [eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB400000
    [eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
    DEV RID : 0xB37B1BC7646A2D2B89C1940E3AD51514
    INT RAM : 0x00020000
    EXT RAM : 0x80000000 [2 GiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand : Unknown
    ProdName : Unknown
    ProdModel : Heart
    Device : Unknown
    AndroidVer: 7.0
    MTKxCPU : MT6737M
    MTKxPRJ : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96

    SECURITY :
    IMEI_SW [1] : 3560xxxxxx
    IMEI_SW [2] : 3560xxxxxx
    BTMAC Addr : CC9F7A309166
    WiFi MAC : CC9F7A309167

    Done!
    Elapsed: 00:00:10
    Reconnect Power/Cable![/CODE]



    Reset settings ( locks, frp and rest )
    :
    كود:
    Operation : Format FileSystem [ v1.58 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 27 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6737
    BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x05000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : LOCKED with CERT
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x9B
    NAND Flash : NOT INSTALLED
    eMMC Flash : 514E011336394A32BD0410522B228A7C
    [WARNING] : MEMORY_eMMC_VALIDATE_FAILED
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x13 , OEM : 014E
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
    [eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB400000
    [eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
    DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    
    Clear FRP ( Google Reset Protection )
    Clear Ok!
    Clear DIN
    Clear Ok!
    Clear USERDATA
    Clear Ok!
    Clear CACHE
    Clear Ok!
    
    Done!
    Elapsed: 00:00:45
    Reconnect Power/Cable!


    Repair Security :

    كود:
    Operation : Repair Security [ v1.58 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 27 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6737
    BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x05000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : LOCKED with CERT
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x9B
    NAND Flash : NOT INSTALLED
    eMMC Flash : 514E011336394A32BD0410522B228A7C
    [WARNING] : MEMORY_eMMC_VALIDATE_FAILED
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x13 , OEM : 014E
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
    [eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB400000
    [eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
    DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    
    IMEI [00] : 35604xxxxxxx
    IMEI [01] : 35604xxxxxxx
    
    Set IMEI [00] : 990000990909097
    Set IMEI [01] : 990909090909098
    Prepare finished. Security check required!
    
    Wait for phone...
    Phone found! [ 27 ]
    Sync...
    Repair done!
    
    Done!
    Elapsed: 00:00:42
    Reconnect Power/Cable!
    Verify Result :
    كود:
    Operation : Check / Read Info [ v1.58 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 27 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6737
    BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x05000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : LOCKED with CERT
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x9B
    NAND Flash : NOT INSTALLED
    eMMC Flash : 514E011336394A32BD0410522B228A7C
    [WARNING] : MEMORY_eMMC_VALIDATE_FAILED
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x13 , OEM : 014E
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
    [eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB400000
    [eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
    DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    [AP] : Initial info read Ok!
    
    Brand     : Unknown
    ProdName  : Unknown
    ProdModel : Heart
    Device    : Unknown
    AndroidVer: 7.0
    MTKxCPU   : MT6737M
    MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96
    
    SECURITY : 
    IMEI_SW [1] : 990000990909097
    IMEI_SW [2] : 990909090909098
    BTMAC Addr  : CC9F7A309166
    WiFi MAC    : CC9F7A309167
    
    Done!
    Elapsed: 00:00:11
    Reconnect Power/Cable!
    Read Firmware :
    كود:
    Operation : Read Flash [ v1.58 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 27 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6737
    BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x05000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : LOCKED with CERT
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x9B
    NAND Flash : NOT INSTALLED
    eMMC Flash : 514E011336394A32BD0410522B228A7C
    [WARNING] : MEMORY_eMMC_VALIDATE_FAILED
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x13 , OEM : 014E
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
    [eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB400000
    [eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
    DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    Reading Flash Content now ... 
    
    xGPT : Normalize settings Ok!
    
    Brand     : Unknown
    ProdName  : Unknown
    ProdModel : Heart
    Device    : Unknown
    AndroidVer: 7.0
    MTKxCPU   : MT6737M
    MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96
    
    [Read Ok] : preloader_ne1.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : logo.bin
    [Read Ok] : secro.img
    [Read Ok] : tz1.img
    [Read Ok] : tz2.img
    [Read Ok] : box.img
    [Read Ok] : sys_info.img
    [Read Ok] : hidden.img
    [Read Ok] : cda.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    
    [ScatCFG] : MT6737M / V1.1.2 / ne1 / EMMC
    Android Info saved
    HWConfig Info saved
    FW Size : 3434 MiB
    Scatter saved to : E:\MT6737M__Unknown__Heart__Unknown__7.0__alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96\
    
    All done!
    
    Done!
    Elapsed: 00:09:44
    Reconnect Power/Cable!


    Flash Firmware :

    كود:
    Scatter Load Ok , BaseBand : MT6737 , Project : ne1 , Storage : EMMC
    Files found : 15 , Set to Flash : 14
    Created by Infinity-Box (c) Chinese Miracle II (c) 2016
    Device Brand   : Unknown
    Device Model   : Unknown
    Device CPU     : MT6737M
    Device IntName : Unknown
    Device Version : 7.0
    Device Compile : 12.04.2017 4:54:56
    Device Project : alps-mp-n0.mp1-V1.0.2_fih6737m.35.n_P96
    Device ExtInfo : Heart
    Ready to Flash!
     
    Operation : Flash [ v1.58 ]
    
    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 27 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6737
    BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x05000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : LOCKED with CERT
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x9B
    NAND Flash : NOT INSTALLED
    eMMC Flash : 514E011336394A32BD0410522B228A7C
    [WARNING] : MEMORY_eMMC_VALIDATE_FAILED
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x13 , OEM : 014E
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , R69J2
    [eMMC] : FLASH_CID : 13014E51324A3936521004BD7C8A242B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB400000
    [eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
    DEV RID    : 0xB37B1BC7646A2D2B89C1940E3AD51514
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    ScatCFG : BaseBand : MT6737 , Project : ne1 , Storage : EMMC
    Setting : Flash Pre-Erase (Safe) : Disabled
    Setting : AFF verify :  Enabled
    Setting : HW verify :  Enabled
    
    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Skip checking by User request!
    
    BL : BatteryLevel : 3779 mV
    BL : BatteryLevel Ok
    
    Backup enabled!
    Backup saved : Backup\Flash\13014E51324A3936521004BD7C8A242B\
    
    SecCfg Passed , 1799
    BMT remark not need. Will skip
    
    Preloader Download skipped by user request! 
    PartCount : 001B
    Update PMT by user request
    Repartition Done!
    Use FLN Mode
    
    Processing : Flash Write
    Flash now : LK
    Image Flash Ok
    Flash now : BOOT
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : SECRO
    Image Flash Ok
    Flash now : TEE1
    Image Flash Ok
    Flash now : TEE2
    Image Flash Ok
    Flash now : BOX
    Image Flash Ok
    Flash now : SYS_INFO
    Image Flash Ok
    Flash now : HIDDEN
    Image Flash Ok
    Flash now : CDA
    Image Flash Ok
    Flash now : SYSTEM
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USERDATA
    Image Flash Ok
    Flash Write Done, time used : 00:06:51
    
    Processing : Verify
    Verify Passed : LK
    Verify Passed : BOOT
    Verify Passed : RECOVERY
    Verify Passed : LOGO
    Verify Passed : SECRO
    Verify Passed : TEE1
    Verify Passed : TEE2
    Verify Passed : BOX
    Verify Passed : SYS_INFO
    Verify Passed : HIDDEN
    Verify Passed : CDA
    Verify Passed : SYSTEM
    Verify Passed : CACHE
    Verify Passed : USERDATA
    Data Verify Done, time used : 00:02:17
    
    Update Mirror PMT
    Update Done!
    
    Update RomInfo done
    
    Done!
    Elapsed: 00:09:26
    Reconnect Power/Cable!
    [/COLOR][/COLOR][/QUOTE]

  4. Top | #3

    :: Super User::

    تاريخ التسجيل
    Nov 2014
    الإقامة
    CONSTANTINE
    المشاركات
    1,279
    معدل تقييم المستوى
    46
    الشكر
    1,977
    تم شكره 2,013 في 663 مشاركة.

    افتراضي

    ما فائدة هذا التحديث وميزته

  5. Top | #4

    عضو اساسي
    تاريخ التسجيل
    Jun 2014
    المشاركات
    804
    معدل تقييم المستوى
    39
    الشكر
    271
    تم شكره 808 في 344 مشاركة.

    افتراضي


  6. Top | #5

    :: مرشح للإشراف ::

    تاريخ التسجيل
    Jun 2014
    الإقامة
    سطيف
    المشاركات
    346
    معدل تقييم المستوى
    26
    الشكر
    302
    تم شكره 1,559 في 284 مشاركة.

    افتراضي

    فريق قوي يستحق التقدير و الاحترام.

  7. Top | #6

    :: الإدارة ::
    تاريخ التسجيل
    Mar 2012
    الإقامة
    Dzgsm
    المشاركات
    10,181
    معدل تقييم المستوى
    10
    الشكر
    31,070
    تم شكره 39,495 في 8,493 مشاركة.

    افتراضي

    الروابط تظهر للاعضاء فقط



    في هذا التحديث أراد أن يبرهن أشياء كثيرة
    لأنه ليس لكل تغيير شيئ بسيط يتغير إسم تحديث

    صحيح هنــاك أنواع غير مدعومة لكنه يعد من أفضل البرامج المدفوعة لحد الأن ومن فريق محترف
    توقيع FaYsSaL_GsM

  8. Top | #7

    :: مرشح للإشراف ::

    تاريخ التسجيل
    Jun 2014
    الإقامة
    سطيف
    المشاركات
    346
    معدل تقييم المستوى
    26
    الشكر
    302
    تم شكره 1,559 في 284 مشاركة.

    افتراضي

    كلامك كافي شافي، شكرا أخي فيصل.


    اقتباس المشاركة الأصلية كتبت بواسطة FaYsSaL_GsM

    الروابط تظهر للاعضاء فقط

    الروابط تظهر للاعضاء فقط



    في هذا التحديث أراد أن يبرهن أشياء كثيرة
    لأنه ليس لكل تغيير شيئ بسيط يتغير إسم تحديث

    صحيح هنــاك أنواع غير مدعومة لكنه يعد من أفضل البرامج المدفوعة لحد الأن ومن فريق محترف

  9. Top | #8

    عضو مميز
    تاريخ التسجيل
    May 2014
    المشاركات
    315
    معدل تقييم المستوى
    19
    الشكر
    5
    تم شكره 245 في 127 مشاركة.

    افتراضي

    فريق قوي يستحق التقدير و الاحترام.

  10. Top | #9

    :: عضو مميز ::

    تاريخ التسجيل
    Mar 2016
    الإقامة
    khenchela
    المشاركات
    907
    معدل تقييم المستوى
    53
    الشكر
    1,550
    تم شكره 632 في 250 مشاركة.

    افتراضي

    أقوى فريق حاليا رفقة الأوكتوبليس

  11. Top | #10

    عضو
    تاريخ التسجيل
    Apr 2016
    المشاركات
    67
    معدل تقييم المستوى
    6
    الشكر
    1
    تم شكره 37 في 24 مشاركة.

    افتراضي

    بالتاكيد ايها الاخوة اقوى فريق محترف باتم معنى الكلمة

صفحة 1 من 2 12 الأخيرةالأخيرة

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
Powered by vBulletin® Copyright © 2021 vBulletin Solutions, Inc. All rights reserved. Hosted by Edisoft