bilal44
عضو نشط
- إنضم
- 26 فبراير 2016
- المشاركات
- 70
- مستوى التفاعل
- 22
- النقاط
- 8
السلام عليكم اخواني لدي مشكل موت جهاز zte blade l2
ولما احاول تفليشه لا يمر الفلاش ويعطي خطا وهذا log الفلاش على nck
Flash files count is :14
Action : Firmware update.
Selected 0-By CPU: MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (28Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM17)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x3c780000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x44580000 - LEN: 0x40000000
Send preloader...
Error: S_DL_PMT_ERR_NO_SPACE
Wait untill phone will start charging.
All done.
ولما احاول تفليشه لا يمر الفلاش ويعطي خطا وهذا log الفلاش على nck
Flash files count is :14
Action : Firmware update.
Selected 0-By CPU: MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (28Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM17)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x3c780000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x44580000 - LEN: 0x40000000
Send preloader...
Error: S_DL_PMT_ERR_NO_SPACE
Wait untill phone will start charging.
All done.
