مساعدة طلب فلاشة htc desire

[sliman]

السلام عليكم ممكن فلاش لهذا الهاتف وهذا انفو الهاتف على cm2

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048604A49D041207
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048604A49D041207
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xBF487B52F37A3D5FEAAEEF05B757A4FB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : htc
ProdName  : htc_europe
ProdModel : HTC Desire 616 dual sim by WyverN
Device    : htc_v3_dug
AndroidVer: 4.2.2
MTKxCPU   : MT6592
MTKxPRJ   : SW_G98518A3_V019_M10_HTC_V3DUG_EURO_MP

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

 

[MR.GSM]

اذا امكن على ميراكل

 

[sliman]

لا املك الميراكل علي الفالكون بوكس ان اردت

 

[MR.GSM]

ميراكل انفوا تاعوا يساعد جيدا في معرفة الفلاةشة المطابقة

 

[hakimmiga]

السلام عليكم
أخي حتى أنا أبحث عن فلاشة htc desire c ولقد طرحت مشكلتي في المنتدى بعد عناء البحث لكن بلا تجاوب أضنها لا توجد فلاشة لهذا الهاتف او نادرة

 

[BOOTB]

https://docs.google.com/uc?id=0By4_z1Byo7UKd0pjOFVjT1gzNXM&export=download

 

[sliman]

بارك الله فيك جاري التحميل والتجريب

 

[Hiche]

https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=9195

pass : www.gem-flash.com

https://docs.google.com/uc?id=0By4_z1Byo7UKd0pjOFVjT1gzNXM&export=download

pass : www.gem-flash.com

D616W لا العربية ولا الفرنسية
https://www.4shared.com/get/5vNMZIxwce/ROM_stock_HTC_D616W_byAbdollah.html


مهم جدا

 

[sliman]

خطأ في الفلاش

Scatter Load Ok , BaseBand : MT6592 , Project : wt98518 , Storage : EMMC
Files found : 13 , Set to Flash : 12
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048604A49D041207
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048604A49D041207
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xBF487B52F37A3D5FEAAEEF05B757A4FB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6592 , Project : wt98518 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3557 mV
BL : [WARNING] : BatteryLevel LOW!!!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000000000-0x0000000000100000
Erase : 0x0000000001D00000-0x00000000E3E00000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_wt98518.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0015
Update PMT by user request
Repartition Failed! Something wrong with HW or BL? Try make "Flash Erase" first!

Operation Failed
Elapsed: 00:00:17
Reconnect Power/Cable!

 

[sliman]

وهذا الخطأ في برنامج sp flash tool

 

[Hiche]

جرب هذه


https://mega.nz/#!gAhEgYDZ!3Fi737CtbSXLn8CWp4bzS1cOUgAAG9VMKMPfCgRf-Bk