من حصل معه نفس المشكل في تفليش lg d821 يفيدنا بالحل !

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
السلام عليكم و رحمة الله و بركاته

اخواني الأعزاء ... أتاني اليوم زبون لديه هاتف من نوع LG D821 معلق على الشعار "Google"

حاولت التفليش بطريقة عادية جدا بعد تحميل الفلاشة الوحيدة بالسيبورت التابع لـ Octopus

عملية الفلاش تتوقف عند 97% (شاشة الهاتف) و هذه صورة العملية و اللوغ :


1487435447921.jpg



كود:
Welcome to Octoplus/Octopus Box LG Software version 2.5.8
Checking data...OK
Platform: LG Qualcomm
Selected port: COM68
Selected model: D821
Reading info...
Model ID: LGD821AT-0LGD821AT-00-V10d-NXS-XX-DEC-11
IMEI: 352136-06-797824-3
Android version: 
Battery level: 99%
SW Version: LGD821AT-00-V10d-NXS-XX-DEC-11
Mode: Emergency
Initializing flash...OK
SW version: LGD821AT-00-V10d-NXS-XX-DEC-11-2013-KOT49H-USER-
16G+0
Android version: 6.0.1
LAF Version: 1.0
Product ID: HD60S140305003780
IMEI: 352136-06-797824-3
Target operator: ro.build.target_coun
Hardware: rev_11
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, 
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any 
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your 
computer during the flashing!
--------------------------------------------------------------------------------
Opening "LGD821AT-00-V10f-NXS-XX-OCT-29-2013-KRT01B-FACTORY-
16G+0.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing rpm...OK
Writing tz...OK
Writing sdi...OK
Writing aboot...OK
Writing sbl1b...OK
Writing tzb...OK
Writing rpmb...OK
Writing abootb...OK
Writing persist...OK
Writing imgdata...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing system...OK
Writing cache...OK
Writing BackupGPT...OK
Reading partitions...OK
[COLOR="#FF0000"]Formating RCT...Failed!
Formating MPT...Failed[/COLOR]!
[COLOR="#008000"]Finalizing...Failed![/COLOR]
[COLOR="#0000FF"]Writing firmware done![/COLOR]
Performed by 2.5.8 Software version.


فهل من حل لهذه المشكلة ؟
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
هل من معين ... أعانكم الله ؟
 

hasni

مراقب قسم SonyEricsson, Se-Tool
إنضم
13 مارس 2012
المشاركات
4,600
مستوى التفاعل
15,444
النقاط
113
الإقامة
الشـــــــــ02ــــــلف
للاسف اخي لا املك هذا البوكس
حسب معلوماتي المتواضعة ومن خلال اللوغ جرب استخدام اخر نسخة من البرنامج
جرب تغيير درايفر موثوق من السبورت
وان شاء الله خير
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
للاف اخي لا املك هذا البوكس
حسب معلوماتي التواضعة ومن خلال اللوغ جرب استخدام اخر نسخة من البرنامج
جرب تغيير درايفر موثوق من السبورت
وان شاء الله خير

البوكس على اخر إصدار ... و تفليش موديلات اخرى يمر بسلاسة و يُسرٍ
شاهدت فيديو على اليوتيوب ..و حدث معه نفس الأمر !!

[video=youtube;qXvc7iYMWW4]https://www.youtube.com/watch?v=qXvc7iYMWW4[/video]
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
السلام عليكم و رحمة الله و بركاته
أخي فيصل جرب فلاشة أخرى

و عليكم السلام و رحمة الله و بركاته
اهلا اخي بلقاسم ...

جربت الفلاشة الوحيدة الموجودة بسيبورت الاوكتوبيس
ثم جربت الفلاشة الاخرى الموجودة بسيبورت الـ z3x

نفس المشكلة !!
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
تأكد جيدا بأنها 16gb
في الفيديو Finalizing...ok!
وعندك Finalizing...Failed!

بالتأكيد .. عارفها 16GB و أخترت لها فلاشتها بالتحديد
المشكلة في الفرق بين Finalizing...ok! و Finalizing...Failed!
 

جمال الدين

:: مرشح للإشراف ::, ,
إنضم
17 أغسطس 2013
المشاركات
1,133
مستوى التفاعل
1,699
النقاط
0
جرب تغيير كابل التفليش بالكابل الذي ياتي مع الاوكتوبليس بالمقاومات المتغيرة هذه صورته :

optimus-cable-for-octopus-octoplus-box.jpg


وحسب تعليمات التفليش للمودل فان الفريق يؤكد على ضرورة ان تكون البطارية مشحونة جيدا وحبذا لو تستعمل باورسبلاي احسن

وايضا حسب التعليمات انه ان كان خطأ في التفليش فيجب ان تقوم بادخال الهاتف لوضع emergency mode يدويا

وايضا يحذرون من الداونغريد اي يجب ان تكون الفلاشة دائما ا على من التي كانت سابقا
 

MDxavi

:: Super User ::, ,
إنضم
10 أغسطس 2014
المشاركات
1,982
مستوى التفاعل
3,814
النقاط
113
إستعمل هده الفلاشة

LGD821AT-00-V10b-NXS-OCT-31-2013-KRT16M-USER-16G+0_2
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
جرب تغيير كابل التفليش بالكابل الذي ياتي مع الاوكتوبليس بالمقاومات المتغيرة هذه صورته :

optimus-cable-for-octopus-octoplus-box.jpg


وحسب تعليمات التفليش للمودل فان الفريق يؤكد على ضرورة ان تكون البطارية مشحونة جيدا وحبذا لو تستعمل باورسبلاي احسن

وايضا حسب التعليمات انه ان كان خطأ في التفليش فيجب ان تقوم بادخال الهاتف لوضع emergency mode يدويا

وايضا يحذرون من الداونغريد اي يجب ان تكون الفلاشة دائما ا على من التي كانت سابقا

سيتم التجريب يدويا ... شكرا لك
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
إستعمل هده الفلاشة

LGD821AT-00-V10b-NXS-OCT-31-2013-KRT16M-USER-16G+0_2

تم التفليش بهذه الفلاشة ... و نفس المشكلة

Checking data...OK
Platform: LG Qualcomm
Selected port: COM68
Selected model: D821
Reading info...
Model ID: LGD821AT-0LGD821AT-00-V10d-NXS-XX-DEC-11
IMEI: 352136-06-797824-3
Android version:
Battery level: 96%
SW Version: LGD821AT-00-V10d-NXS-XX-DEC-11
Mode: Emergency
Initializing flash...OK
SW version: LGD821AT-00-V10d-NXS-XX-DEC-11-2013-KOT49H-USER-
16G+0
Android version: 6.0.1
LAF Version: 1.0
Product ID: HD60S140305003780
IMEI: 352136-06-797824-3
Target operator: ro.build.target_coun
Hardware: rev_11
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "LGD821AT-00-V10b-NXS-XX-OCT-31-2013-KRT16M-USER-
16G+0.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing rpm...OK
Writing tz...OK
Writing sdi...OK
Writing aboot...OK
Writing sbl1b...OK
Writing tzb...OK
Writing rpmb...OK
Writing abootb...OK
Writing persist...OK
Writing imgdata...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing system...OK
Writing cache...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...Failed!
Formating MPT...Failed!
Finalizing...Failed!

Writing firmware done!
Performed by 2.5.8 Software version.
 

MDxavi

:: Super User ::, ,
إنضم
10 أغسطس 2014
المشاركات
1,982
مستوى التفاعل
3,814
النقاط
113
تم التفليش بهذه الفلاشة ... و نفس المشكلة

Checking data...OK
Platform: LG Qualcomm
Selected port: COM68
Selected model: D821
Reading info...
Model ID: LGD821AT-0LGD821AT-00-V10d-NXS-XX-DEC-11
IMEI: 352136-06-797824-3
Android version:
Battery level: 96%
SW Version: LGD821AT-00-V10d-NXS-XX-DEC-11
Mode: Emergency
Initializing flash...OK
SW version: LGD821AT-00-V10d-NXS-XX-DEC-11-2013-KOT49H-USER-
16G+0
Android version: 6.0.1
LAF Version: 1.0
Product ID: HD60S140305003780
IMEI: 352136-06-797824-3
Target operator: ro.build.target_coun
Hardware: rev_11
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "LGD821AT-00-V10b-NXS-XX-OCT-31-2013-KRT16M-USER-
16G+0.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing rpm...OK
Writing tz...OK
Writing sdi...OK
Writing aboot...OK
Writing sbl1b...OK
Writing tzb...OK
Writing rpmb...OK
Writing abootb...OK
Writing persist...OK
Writing imgdata...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing system...OK
Writing cache...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...Failed!
Formating MPT...Failed!
Finalizing...Failed!

Writing firmware done!
Performed by 2.5.8 Software version.

مرر على LGFlashTool 1.8.1.1023
 
أعلى