R3 Tool Pro

صفحة 1 من 12 12311 ... الأخيرةالأخيرة
النتائج 1 إلى 10 من 117

الموضوع: جميع تحديثات VolcanoBox.اخر تحديث 3.0.9

  1. #1
    El_Hakim_Gsm غير متواجد حالياً
    :: مراقب ::
    قسم البوكسات الصينية
    تاريخ التسجيل
    Aug 2012
    المشاركات
    5,690
    معدل تقييم المستوى
    242
    شكراً
    24,922
    تم شكره
    21,324

    افتراضي جميع تحديثات VolcanoBox.اخر تحديث 3.0.9


    الروابط تظهر للاعضاء فقط
    جميع تحديثات VolcanoBox.اخر تحديث 3.0.9



    من الساعة ان شاء الله سوف نضع جميع تحديثات البوكس هنا .
    التحديث الاخير طبعا2.9.9

    جديد التحديث
    انظر اخر صفحة.

  2. 13 أعضاء قالوا شكراً لـ El_Hakim_Gsm على المشاركة المفيدة:


  3. #2
    El_Hakim_Gsm غير متواجد حالياً
    :: مراقب ::
    قسم البوكسات الصينية
    تاريخ التسجيل
    Aug 2012
    المشاركات
    5,690
    معدل تقييم المستوى
    242
    شكراً
    24,922
    تم شكره
    21,324

    افتراضي

    Volcanobox V1.9.2 World's 1st Mstar Flash for Unlock & Coolsand Detection Solved

    Worlds 1st Mstar Flash for unlock !!
    Coolsand detection/Pinfind Solved !!
    MTK6250 flashing update

    وطبعا التحديث .على الميــــــــــــــديا فاير.

    الروابط تظهر للاعضاء فقط

  4. 6 أعضاء قالوا شكراً لـ El_Hakim_Gsm على المشاركة المفيدة:


  5. #3
    El_Hakim_Gsm غير متواجد حالياً
    :: مراقب ::
    قسم البوكسات الصينية
    تاريخ التسجيل
    Aug 2012
    المشاركات
    5,690
    معدل تقييم المستوى
    242
    شكراً
    24,922
    تم شكره
    21,324

    افتراضي

    ................VolcanoBox 1.9.3 Coolsand Auto Boot Interduced & Mstar New Cpu & New Flash id Added




    الجديد في التحديث..

    Coolsand add new Boot_B
    Coolsand new boot support auto read write flash
    Mstar add new cpu support
    Mstar New Flash Added
    Fixed Mstar Bug


    Details:

    Volano box Released Coolsand BOOT_B. What is it?

    This is for read and write mostly flash ic auto. don't need to select different Flash type. Keep in mind that this is in BETA state. it could have some problems. if you found any problem please report us.
    from now you have two type of Boot. One is "Auto"and one is "Boot_B". whenever you run volcanobox keep in mind what you have select up side of software you can near BOOT FILE button. Select BOOT_B from boot and select AUTO from Flash Type and try to read and write different flash ic. at the moment 8851a and some other flash ic will not work on BOOT_B but in upcoming update we will add. So from now please test for us and report us which Flash ic and which Mcu work AUTO in BOOT_B. in 1.9.4 8851a and some other cpu & Flash type we will add. so now we are working on Fully Automatic Coolsand. Hope you will like us & Will Support us in future too.

    التحميــــــــــــــــــل.
    .....
    الروابط تظهر للاعضاء فقط
    او

    الروابط تظهر للاعضاء فقط

  6. 4 أعضاء قالوا شكراً لـ El_Hakim_Gsm على المشاركة المفيدة:


  7. #4
    driss_dz غير متواجد حالياً
    :: محترف Soft & Hard ::
    تاريخ التسجيل
    Mar 2012
    المشاركات
    1,038
    معدل تقييم المستوى
    35
    شكراً
    716
    تم شكره
    2,684

    افتراضي

    اقتباس المشاركة الأصلية كتبت بواسطة El_Hakim_Gsm
    الروابط تظهر للاعضاء فقط
    ................VolcanoBox 1.9.3 Coolsand Auto Boot Interduced & Mstar New Cpu & New Flash id Added




    الجديد في التحديث..

    Coolsand add new Boot_B
    Coolsand new boot support auto read write flash
    Mstar add new cpu support
    Mstar New Flash Added
    Fixed Mstar Bug


    Details:

    Volano box Released Coolsand BOOT_B. What is it?

    This is for read and write mostly flash ic auto. don't need to select different Flash type. Keep in mind that this is in BETA state. it could have some problems. if you found any problem please report us.
    from now you have two type of Boot. One is "Auto"and one is "Boot_B". whenever you run volcanobox keep in mind what you have select up side of software you can near BOOT FILE button. Select BOOT_B from boot and select AUTO from Flash Type and try to read and write different flash ic. at the moment 8851a and some other flash ic will not work on BOOT_B but in upcoming update we will add. So from now please test for us and report us which Flash ic and which Mcu work AUTO in BOOT_B. in 1.9.4 8851a and some other cpu & Flash type we will add. so now we are working on Fully Automatic Coolsand. Hope you will like us & Will Support us in future too.

    التحميــــــــــــــــــل.
    .....
    الروابط تظهر للاعضاء فقط
    او

    الروابط تظهر للاعضاء فقط

    رابط مباشر


    الروابط تظهر للاعضاء فقط

  8. 3 أعضاء قالوا شكراً لـ driss_dz على المشاركة المفيدة:


  9. #5
    melizi_28 غير متواجد حالياً
    :: محترف ::
    Soft & Hard

    تاريخ التسجيل
    Mar 2012
    المشاركات
    1,269
    معدل تقييم المستوى
    58
    شكراً
    3,437
    تم شكره
    4,429

    افتراضي

    VolcanoBox 1.9.4

    Whats new ?

    Added RDA 8851 & RDA8852 & some more to new BOOT_B
    Added Format & Repair imei to new BOOT_B
    Improve Mtk android emmc read & write flash

    What is Boot_B ?

    Boot_B is for Fully Automated for read & write & format & imei repair !!. This is still in beta. you can try and let us know the bugs and problems. how it will works ?

    when ever you got any mobile

    Select BOOT_B from BOOT FIle
    Select AUTO from Flash Type

    and try to do read and write or any other operation which you need to do.

    if failed

    Select AUTO from BOOT File
    Select AUTO from FLASH TYPE

    and try to do read and write or any other operation which you need to do.

    if failed

    Select AUTO from BOOT File
    Select your Desire Flash Type

    and try to do read and write or any other operation which you need to do.

    if failed

    Please Report us with all details.

    Please make new thread and write which cpu you done on BOOT_B & Flash Type Auto and Which cpu you done on AUTO & Flash Type AUTO. like this we will know what and how we can improve.



    الروابط تظهر للاعضاء فقط


    الروابط تظهر للاعضاء فقط

  10. 2 أعضاء قالوا شكراً لـ melizi_28 على المشاركة المفيدة:


  11. #6
    El_Hakim_Gsm غير متواجد حالياً
    :: مراقب ::
    قسم البوكسات الصينية
    تاريخ التسجيل
    Aug 2012
    المشاركات
    5,690
    معدل تقييم المستوى
    242
    شكراً
    24,922
    تم شكره
    21,324

    افتراضي VolcanoBox1.9.4

    التحميـــــــــــــــــــــــــــــل على الميديا فاير

    الروابط تظهر للاعضاء فقط
    المرفق .MTK Universal Drivers.rar
    الملفات المرفقة الملفات المرفقة

  12. 4 أعضاء قالوا شكراً لـ El_Hakim_Gsm على المشاركة المفيدة:


  13. #7
    El_Hakim_Gsm غير متواجد حالياً
    :: مراقب ::
    قسم البوكسات الصينية
    تاريخ التسجيل
    Aug 2012
    المشاركات
    5,690
    معدل تقييم المستوى
    242
    شكراً
    24,922
    تم شكره
    21,324

    افتراضي

    VolcanoBox 1.9.6 Grand Update Added SonyEricsson Xperia & Coolsand & Alcatal & More


    We are Happy to Announce Grand update
    Volcanobox 1.9.6


    Whats new ?

    1- Added SonyEricsson Xperia phones for Unlock

    Here is list


    1. x10
    2. x10i
    3. x10a
    4. SO-01B
    5. E10i
    6. U20
    7. X8
    8. E15
    9. W8
    10. E16
    11. E16i
    12. LT15
    13. MK16
    14. MT11
    15. MT15
    16. R800
    17. SK17
    18. ST15
    19. St17
    20. ST18
    21. WT19
    22. Z1
    23. SO-01C
    24. SO-01D
    25. SO-03C
    26. S51se
    27. LT18


    Keep in mind New Security is not supported !!

    How To Unlock SonyEricsson Xperia Phones

    1st of all you need to install drivers

    How to install drivers ?

    • Go to Volcanobox\Drivers\SonyXperia
    • If you have phone which can be done without TP then open NON_TP_Drivers and install drivers OR if you have phone which can be done with TP then open TP_Drivers and install drivers
    • we need to connect the X10 in Flash Mode (it’s called boot mode or Download boot mode)
    • Remove battery from phone and insert it again
    • Make sure phone is Turned off condition
    • Press & Hold “back Button” from phone
    • While holding “Back Button” from phone insert/plug Usb cable into phone
    • ******s will ask you for drivers. If it’s not install auto then give path of drivers from Volcanobox Folder (Volcanobox\Drivers\SonyXperia)
    • Once it’s complete You had done 1st part Now you have to unplug mobile and make it completely power on
    • As your mobile powered up Go to settings , Application , Enable “Usb Debugging” ( in some phones USB debugging have in different ******** for example you need to go in settings, Application, Development, or in some phone setting, Development, )
    • After Enable Usb debugging connect usb cable to you phone and let it’s install drivers if not driver not install then give path of drivers from Volcanobox folder.
    • As it’s complete you are ready to Unlock your phone.



    As Drivers installed you can Start Unlocking


    • 1. Open VolcanoBox and click on Xperia
    • 2. Make sure There is no Simcard in your mobile
    • 3. Make sure SD Card ( memory card ) inserted in the phone
    • 4. Make sure your phone have not Android ver 1.6 ( you must use 2.1 or later ver of Android )
    • 5. Make sure your phone is NOT rooted
    • 6. Make sure your phone not have any Custom rom
    • 7. Make sure your Internet Connection is work good and Firewall is turned-ff
    • 8. Make sure Usb debugging mode is enabled
    • 9. Make sure your Antivirus is turned-off
    • 10. Cllck on Get Info from VolcanoBox software
    • 11. Remove Battery and insert it again
    • 12. Press and hold Back Button
    • 13. Insert Usb cable while holding Back Button from phone
    • 14. If everything ok you will get info about your phone
    • 15. Now Click on Unlock
    • 16. Repeat operation from 8 to 10
    • 17. When software Ask you Remove Usb cable, complete power on your phone, Connect usb cable to phone, ( make sure Use Debugging is enabled )
    • 18. Wait till software complete it’s operation.
    • 19. Your phone is unlocked !!



    Some Common Problems:



    Unlock Not OK or Not Detecting Phone?
    Possible causes:

    • 1. On Vista or ******s 7 32/64 Bit ******s, VolcanoBox must run as administrator (right click , select "run as administrator")


    • 2. Firewall or Antivirus is deleting files . Uninstall VolcanoSoftware and turn off antivirus and reinstall.

    Phone shows no service after unlock:

    • 1. Remove Battery and wait 1 minute. Insert Battery and power on phone.

    Software hangs while unlocking or detecting ADB device
    Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again

    TEST Point pictures & this Detailed manual already inside your volcanobox. just run volcano click on Help Manual button right after connect button. then click on How to Unlock Xperia Phones. you will see all details.

    2- Coolsand Read / Write / Format More Stable then ever

    Volcano Box introduced Boot_B for Coolsand. this is very stable version ever before. i want to share some thing about Coolsand.

    Now Coolsand have two different Boots

    1- built-in Auto
    2- built-in BOOT_B


    2- Built-in Boot_B
    is fully Auto you don't need to select any thing. just make sure you have selected Boot_B from Boot and Auto from Flash id. if you want to format also you don't need to write any format address. We had tested lot of phones for formatting with 4mb , 8mb , 16mb, and we success. You can see reports from here

    الروابط تظهر للاعضاء فقط

    If somehow you still face some problem please report us on forum or send me pm


    1- Built-in AUTO
    This is Auto and Manual both. if you select Auto from boot and Auto from Flash id it will work auto. but if somehow you want to do manual work then you can select Auto from boot and Select your DESIRE FLASH ID from flash id and you can do work.

    This is still BETA we research lot of new things and we are working on it soon you guys will have Fully Auto and Fully Bugs free ver and Fully Supported coolsand phones. At the moment we support maximum cpu and maximum flash id which still other not do.



    3- Coolsand Read USER Area
    4- Coolsand Write USER AREA


    Read & Write User Area is for repair signals in coolsand phones, Read & Write user area is for repair Usercode problems in Coolsand phones, Read & Write user area is for repair blinking problems, in other words read & write user area is very use full. in other words you can say it's NV. but it have more than NV area جميع تحديثات VolcanoBox.اخر تحديث 3.0.9



    5- Added Write Flash Security for Coolsand


    1. In COOLSAND BOOT_B you try to write any file and volcano say to "you Writing this file is risky" This mean your readed flash is not good and volcano will not write your flash file. this is for avoid after write flash mobile dead. if you still want to write this flash file you can use built-in AUTO and select your desire flash id Volcano will write flash file but not sure your mobile will come alive or not or your mobile become dead.






    6- Added More Manuals in Volcano box
    7- Adjust Coolsand Find pass algorithm
    8- Added Alcatel MTK Android Phones for Direct Unlock & Read Code ( Sp Unlock )

    here is list



    • OT-S600
    • OT-S710
    • OT-S800
    • OT-J610
    • OT-S500
    • OT-S810
    • OT-S820
    • OT-S850




    الروابط تظهر للاعضاء فقط


    AT ALL BETA TESTERS. PLEASE REDOWNLOAD IT. WE MODIFY IT.


    رابط اخر...
    الروابط تظهر للاعضاء فقط




  14. 3 أعضاء قالوا شكراً لـ El_Hakim_Gsm على المشاركة المفيدة:


  15. #8
    El_Hakim_Gsm غير متواجد حالياً
    :: مراقب ::
    قسم البوكسات الصينية
    تاريخ التسجيل
    Aug 2012
    المشاركات
    5,690
    معدل تقييم المستوى
    242
    شكراً
    24,922
    تم شكره
    21,324

    افتراضي

    VolcanoBox 1.9.7 MTK Android New Boot V7.1304Supported More Flash SPD 6530a new Flash

    VolcanoBox 1.9.7

    Whats new ?


    • MTK Android added new Boot V7.1304 ( more flash id is supported )
    • Adjust MTK625A Write Flash
    • Solve MTK Android Read and Write break-off
    • Solve SPD6530 Read Flash bug
    • Solve Coolsand Find Pass bug
    • More Stable for SPD6530a Cpu !!


    للتحميل من
    الروابط تظهر للاعضاء فقط
    او
    من

    الروابط تظهر للاعضاء فقط
    .

  16. 4 أعضاء قالوا شكراً لـ El_Hakim_Gsm على المشاركة المفيدة:


  17. #9
    DZ-Developer غير متواجد حالياً
    :: مراقب ::
    قسم بوكسات JTAG
    قسم Motorola
    قسم LG
    تاريخ التسجيل
    Apr 2012
    الدولة
    الجزائر الغالية
    المشاركات
    5,433
    معدل تقييم المستوى
    338
    شكراً
    21,608
    تم شكره
    31,031

    افتراضي VolcanoBox 1.9.8 MTK 625a Imei Repair with USB, SPD Android Format, MTK Andrid


    VolcanoBox 1.9.8 MTK 625a Imei Repair with USB, SPD Android Format, MTK Andrid

    1.ADJUST MTK 625A IMEI CHANGE (COM.USB

    2.ADJUST SPD ANDROID FORMAT

    2.OPTIMIZE MTK ANDROID BOOT V7.1304 READ/WRITE


    الروابط تظهر للاعضاء فقط





  18. 6 أعضاء قالوا شكراً لـ DZ-Developer على المشاركة المفيدة:


  19. #10
    driss_dz غير متواجد حالياً
    :: محترف Soft & Hard ::
    تاريخ التسجيل
    Mar 2012
    المشاركات
    1,038
    معدل تقييم المستوى
    35
    شكراً
    716
    تم شكره
    2,684

    افتراضي

    رابط على المديفار

    الروابط تظهر للاعضاء فقط

  20. 3 أعضاء قالوا شكراً لـ driss_dz على المشاركة المفيدة:


صفحة 1 من 12 12311 ... الأخيرةالأخيرة

المواضيع المتشابهه

  1. حصريا جميع فلاشات النوكيا . جميع الاصدارات تحميل صااااروخ
    بواسطة mrm200000 في المنتدى قسم فلاشات النوكيا nokia
    مشاركات: 38
    آخر مشاركة: يوم أمس, 03:47
  2. تحديثات: تحديث جديد VolcanoBox 1.7.3
    بواسطة El_Hakim_Gsm في المنتدى قسم الفولكانو بوكس & VolcanoBox
    مشاركات: 1
    آخر مشاركة: 11-23-2012, 20:13
  3. VolcanoBox Ver 1.6.3 Iphone IMEI Check Service FREE for all VolcanoBox Users !!
    بواسطة GSM News في المنتدى أخر أخبار وتحديثات GSM News & Updates
    مشاركات: 0
    آخر مشاركة: 10-10-2012, 17:40
  4. VolcanoBox V1.4.7 Added Huawei U Series Phones //\\ VolcanoBox Will Echo in History
    بواسطة AMINE-GSM في المنتدى قسم الفولكانو بوكس & VolcanoBox
    مشاركات: 1
    آخر مشاركة: 08-07-2012, 01:04

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
الأرشيف | الاتصال بنا | Privacy-Policy