مت بعد تفليش بي cm2 Condor F1

[samirh127]

كوندور ف1توقف بعد عمليت الفلاش عن طريق CM2 هل من حل

CONDOR F1 dead after flash team plz help

Load File
File_Info : WBG2301AC_0201_PCB01_gprs_MT6260_S00.2301AC_0201_V 0754.bin
FileVersion : 2301AC_0201_V0754
Load File Ok

Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : WBG2301AC_0201_PCB01_gprs_MT6260_S00.2301AC_0201_V 0754.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 77 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : C6D83EE621BCCB13EDC97EE1A7DC7E15
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : FF00 FF00 FF00 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xAA
SOC Verification failed!
Check cable, Battery, Connection!
Boot Error!

Operation Failed
Elapsed: 00:01:05
Reconnect Power/Cable!

 

[BY AMINO GSM]

جرب تفليش علي فلكانوا بوكس او اميراكل مضمون