حصري فلاشة فول دامب doogee x5 max ذات المعالج mtk6735
- بادئ الموضوع sbouki
- تاريخ البدء
che.abdennacer
عضو
- إنضم
- 21 مارس 2015
- المشاركات
- 12
- مستوى التفاعل
- 4
- النقاط
- 0
فلاشة فول دامب لهاتف DOOGEE X5 MAX MTK6735 وهي بصيغة Scatter.
Waiting for USB Port...
Set PreLoader USB VCOM Port (COM3)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00
Downloading Boot8 ...
EMMC Size: 0x01CE100000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
idOOGEE-X5max-Android6.0-20160913
version:6.0
model:X5max
brand
manufacturer
PROINFO BaseAddr:0x80000 Size:0x300000
NVRAM BaseAddr:0x380000 Size:0x500000
PROTECT1 BaseAddr:0x880000 Size:0xA00000
PROTECT2 BaseAddr:0x1280000 Size:0xA00000
LK BaseAddr:0x1C80000 Size:0x80000
PARA BaseAddr:0x1D00000 Size:0x80000
BOOT BaseAddr:0x1D80000 Size:0x1000000
RECOVERY BaseAddr:0x2D80000 Size:0x1000000
LOGO BaseAddr:0x3D80000 Size:0x800000
EXPDB BaseAddr:0x4580000 Size:0xA00000
SECCFG BaseAddr:0x4F80000 Size:0x80000
OEMKEYSTORE BaseAddr:0x5000000 Size:0x200000
SECRO BaseAddr:0x5200000 Size:0x600000
KEYSTORE BaseAddr:0x5800000 Size:0x800000
TEE1 BaseAddr:0x6000000 Size:0x500000
TEE2 BaseAddr:0x6500000 Size:0x500000
FRP BaseAddr:0x6A00000 Size:0x100000
NVDATA BaseAddr:0x6B00000 Size:0x2000000
METADATA BaseAddr:0x8B00000 Size:0x2500000
SYSTEM BaseAddr:0xB000000 Size:0xA0000000
CACHE BaseAddr:0xAB000000 Size:0x19000000
USERDATA BaseAddr:0xC4000000 Size:0x109080000
FLASHINFO BaseAddr:0x1CD080000 Size:0x1000000
>>Done
https://mega.nz/#!a08HmbrZ!aStd69rMOaaZ4AR_zhGUhCqUxiYt2mqOx3nTtbUi5F4
=====================================================================
السلام عليكم اخي
هل يجب تمرير هذه الفلاشة بواسطة البوكس لكي تمر ؟؟؟
لاني جربت تمرير هذه النسخة ب flashtool لكن عند تحميل ملف السكاتر scutter للبرنامج يعطيني رسالة خطأ في الملفات
any suggestions friends ?
وشكرا
فلاشة فول دامب لهاتف DOOGEE X5 MAX MTK6735 وهي بصيغة Scatter.
Read info
Waiting for USB Port...
Set PreLoader USB VCOM Port (COM3)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00
Downloading Boot8 ...
EMMC Size: 0x01CE100000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
id
version:6.0
model:X5max
brand
manufacturer
PROINFO BaseAddr:0x80000 Size:0x300000
NVRAM BaseAddr:0x380000 Size:0x500000
PROTECT1 BaseAddr:0x880000 Size:0xA00000
PROTECT2 BaseAddr:0x1280000 Size:0xA00000
LK BaseAddr:0x1C80000 Size:0x80000
PARA BaseAddr:0x1D00000 Size:0x80000
BOOT BaseAddr:0x1D80000 Size:0x1000000
RECOVERY BaseAddr:0x2D80000 Size:0x1000000
LOGO BaseAddr:0x3D80000 Size:0x800000
EXPDB BaseAddr:0x4580000 Size:0xA00000
SECCFG BaseAddr:0x4F80000 Size:0x80000
OEMKEYSTORE BaseAddr:0x5000000 Size:0x200000
SECRO BaseAddr:0x5200000 Size:0x600000
KEYSTORE BaseAddr:0x5800000 Size:0x800000
TEE1 BaseAddr:0x6000000 Size:0x500000
TEE2 BaseAddr:0x6500000 Size:0x500000
FRP BaseAddr:0x6A00000 Size:0x100000
NVDATA BaseAddr:0x6B00000 Size:0x2000000
METADATA BaseAddr:0x8B00000 Size:0x2500000
SYSTEM BaseAddr:0xB000000 Size:0xA0000000
CACHE BaseAddr:0xAB000000 Size:0x19000000
USERDATA BaseAddr:0xC4000000 Size:0x109080000
FLASHINFO BaseAddr:0x1CD080000 Size:0x1000000
>>Done
https://mega.nz/#!a08HmbrZ!aStd69rMOaaZ4AR_zhGUhCqUxiYt2mqOx3nTtbUi5F4
السلام عليكم شكرا اخي على الفلاشة لاكن لا تعمل مع الفلاش تول ممكن فلاشة تمر بالفلاش تول او الفولكانو بنفس المعالج كفن 6735 وشكرا
يونس GSM
عضو أساسي
- إنضم
- 22 مايو 2012
- المشاركات
- 834
- مستوى التفاعل
- 523
- النقاط
- 93
الملف معطوب اخي جربه بنفسك اكثر من ساعة وتحميل جاري وفي الاخير الفلاشة غير صالحة
NCK
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM13)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
Error: S_INVALID_BBCHIP_TYPE
Wait untill phone will start charging.
All done.
MIRACLE
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00
Downloading Boot11 ...
EMMC Size: 0x01CD000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
Writing(Nand/eMMC)...
Error set: patti
CM2
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 422201F46E697769000010202B945202
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E201000000252832B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0xADBDBA4F5C316606FB92CCAAD6C5A70B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
ScatCFG : BaseBand : MT6735 , Project : mtk_android , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
BL : Check HW compatibility
BL : BBID NOT supported by BootLoader!
[BL_ERROR] : BBID : Break Flashing! This Firmware will kill phone!
Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!
NCK
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM13)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
Error: S_INVALID_BBCHIP_TYPE
Wait untill phone will start charging.
All done.
MIRACLE
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00
Downloading Boot11 ...
EMMC Size: 0x01CD000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
Writing(Nand/eMMC)...
Error set: patti
CM2
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 422201F46E697769000010202B945202
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E201000000252832B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0xADBDBA4F5C316606FB92CCAAD6C5A70B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
ScatCFG : BaseBand : MT6735 , Project : mtk_android , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
BL : Check HW compatibility
BL : BBID NOT supported by BootLoader!
[BL_ERROR] : BBID : Break Flashing! This Firmware will kill phone!
Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!
aboubakr48
عضو نشط
- إنضم
- 14 يناير 2014
- المشاركات
- 42
- مستوى التفاعل
- 28
- النقاط
- 18
الفلا شة لا تعمل تم التجريب على اكثر من بوكس و برنامج خارجي .
djalal1
عضو نشط
- إنضم
- 2 نوفمبر 2014
- المشاركات
- 63
- مستوى التفاعل
- 55
- النقاط
- 18
يمكن التفليش ب sp flash tool يتعديل على السكاتر حذف ادراس PGPT بالنسبة لخطاء >>Error set: patti
في miracle حذف ادراس FLASHINFO انا لدي مشكلة بعد التفليش يبقى ميت حجم الذاكرة عندي EMMC Size: 0x01CD000000 : والفلاشة المقترحة EMMC Size: 0x01CE100000 لمن عنده نفس الذاكرة بروسيساور mt6735 لا يبخل علينا برفع فلاشة مطابقة وشكرا
في miracle حذف ادراس FLASHINFO انا لدي مشكلة بعد التفليش يبقى ميت حجم الذاكرة عندي EMMC Size: 0x01CD000000 : والفلاشة المقترحة EMMC Size: 0x01CE100000 لمن عنده نفس الذاكرة بروسيساور mt6735 لا يبخل علينا برفع فلاشة مطابقة وشكرا
فلاشة فول دامب لهاتف DOOGEE X5 MAX MTK6735 وهي بصيغة Scatter.
Read info
Waiting for USB Port...
Set PreLoader USB VCOM Port (COM3)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00
Downloading Boot8 ...
EMMC Size: 0x01CE100000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
id
version:6.0
model:X5max
brand
manufacturer
PROINFO BaseAddr:0x80000 Size:0x300000
NVRAM BaseAddr:0x380000 Size:0x500000
PROTECT1 BaseAddr:0x880000 Size:0xA00000
PROTECT2 BaseAddr:0x1280000 Size:0xA00000
LK BaseAddr:0x1C80000 Size:0x80000
PARA BaseAddr:0x1D00000 Size:0x80000
BOOT BaseAddr:0x1D80000 Size:0x1000000
RECOVERY BaseAddr:0x2D80000 Size:0x1000000
LOGO BaseAddr:0x3D80000 Size:0x800000
EXPDB BaseAddr:0x4580000 Size:0xA00000
SECCFG BaseAddr:0x4F80000 Size:0x80000
OEMKEYSTORE BaseAddr:0x5000000 Size:0x200000
SECRO BaseAddr:0x5200000 Size:0x600000
KEYSTORE BaseAddr:0x5800000 Size:0x800000
TEE1 BaseAddr:0x6000000 Size:0x500000
TEE2 BaseAddr:0x6500000 Size:0x500000
FRP BaseAddr:0x6A00000 Size:0x100000
NVDATA BaseAddr:0x6B00000 Size:0x2000000
METADATA BaseAddr:0x8B00000 Size:0x2500000
SYSTEM BaseAddr:0xB000000 Size:0xA0000000
CACHE BaseAddr:0xAB000000 Size:0x19000000
USERDATA BaseAddr:0xC4000000 Size:0x109080000
FLASHINFO BaseAddr:0x1CD080000 Size:0x1000000
>>Done
https://mega.nz/#!a08HmbrZ!aStd69rMOaaZ4AR_zhGUhCqUxiYt2mqOx3nTtbUi5F4
اخي sbouki ان شاء الله تكون في صحة وعافية لم انسي جميلك في معاونتي من قبل لاصلاح هاتف
اخي عندي هاتف دوجي 5-max مات بعد التفليش رغم اني متيقن من صحت الفلاشة عملت بها من قبل بلا مشاكل
لكن مع هذا الهاتف مات مات وقبل التفليش اخذت نسخة احطياطية بي cm2 واعدتها وتعطيني هذه النتيجة
Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 422201F46E6977690000102011F2CA03
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E2010000003CA8311
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0xC664D828B2AE8BDA33892CD88B136633
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
ScatCFG : BaseBand : MT6737 , Project : n370b , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!
BL : BatteryLevel : Unknown (not supported or without battery)
BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000004D80000
Erase : 0x0000000006B00000-0x00000001C5480000
Flash Pre-Erase Done, time used : 00:00:00
SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_n370b.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : FFFFFFFF
PartErr : Not initialized , will update PMT now ...
Repartition Done!
Use FLN Mode
Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : TEE1
Image Flash Ok
Flash now : TEE2
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:03:00
Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : TEE1
Verify Passed : TEE2
Verify Passed : SYSTEM
Verify Passed : CACHE
Operation Failed
Elapsed: 00:04:03
Reconnect Power/Cable!
حاولت تفليشها بفلاشات من مواظيع منتدانا لكن يلا نتيجة وكذالك حملت الفلاشة التي وظعتها .. فلاشة فول دامب doogee x5 max ذات المعالج mtk6735 من هذا الموظوع https://www.dzgsm.com/vb/threads/44031-doogee-x5-max-mtk6735/
لم افلح في في تمريرها بي cm2 ولا بي miracl box بارك الله فيك عاونا في احيا الهاتف شكرا
العفو اخي الفاضل لا شكر على واجب هذا اقل من واجب اذا اردت عليك ان تاتيني الى المحل غدا ان شاء الله فيه خير
تعرف واش معناه هذا
MEMORY_eMMC_VALIDATE_FAILED
افدنا اخينا