اول بوكس يدعم تفليش و قراءة فلاشة : D100 -L20
و هذا لوغ عملية قراءة الفلاشة
=== v1.51 ===
LG Bello, D-Series and more models !
>> Enabled support for the next LG devices:
D100, D100AR/F/G/J
D105, D105F
D107
D213, D213AR/C/F/N/T
D335
D690
H320
H500, H500F/G/T
Supported features:
Read full info (with extended info)
Factory FW Read / Write
FlashDump Read / Write
NVRAM Read / Write
Security Read / Write
UserLocks Reset (Include LG "Knock Code") without data lost
PatternLock Reading
HW test - RAM, eMMC, Battery
Security repair - IMEI1, IMEI2, BTMAC, WiFiMAC
SP Unlock (Code Reading)
Format FileSystem
Repair ExtData
Flash Erase
Fix Unknown BaseBand
Init Preloader
Memory Repartition
Forensic: PhoneBook extraction
Forensic: User Gallery (Photo / Video) extraction
>> New features for already supported models:
E440, E440F/G/J
E445
E450, E450B/F/G/J
E451
E455, E455F/G
E460, E460F
Supported features:
Enabled Read and Write Factory Firmware !
* Info: On some devices possible get stuck at boot logo
* Info: Enough make "Format FS" operation on WIPE mode (second option) to fix that
>> FW Read Engine Revised
Brand-Specific improvements for Infocus, Wiko, LG and some other brands.
Files verification improved
>> UserData
Feature Phones: MT625A, MT6260, MT6261: PhoneBook reading engine updated
* Now support ALL SRS (Single Record Structure) phones in AutoDetection mode
* Support up to 2000 phonebook entries extraction (max count for Feature Phones)
>> Other
Flash ID database updated
Some experimental features enabled
Some bugfixes and improvements
و هذا لوغ عملية قراءة الفلاشة
كود:
Card found : S/N : .......... , v0130
Chinese Miracle II [MTK module] v 1.51
Operation : Read Flash [ v1.51 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 65 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D420699E1CA25C193
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D420699E1CA25C193
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x648ABF71701CAE87C80927EFB295A094
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : lge
ProdName : luv20ss_global_com
ProdModel : LG-D100
Device : luv20ss
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.W10.24.p0
[Read Ok] : preloader_muse72_s2_kk0.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : _ext_pl.img
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : EBR3
[Read Ok] : persist.img
[Read Ok] : cust.img
[Read Ok] : factory.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / muse72_s2_kk0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1392 MiB
Scatter saved to : \MT6572__lge__LG-D100__luv20ss__4.4.2__ALPS.W10.24.p0\
All done!
Done!
Elapsed: 00:16:51
Reconnect Power/Cable!
التعديل الأخير: