مساعدة بخصوص condor p8
- بادئ الموضوع maazer
- تاريخ البدء
لا تتعب نفسك الحل بسيط .حمل التطبيق Engineer Mode . استعمل youtube لفهم التشغيل .موفق .
1. Install "MTK Engineering Mode" then Start App
2. Then go to MTK Settings
3. Go to Connectivity
4. Go to CDS Information
5. Go to Radio Information
6. Select Phone1
7. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1″ (Put your first IMEI number, check phone box or case for imei)
8. Hit send command and you will / may get a confirmation that "sent to mSend".
9. Now go back and select “Phone2″ (for the second IMEI number)
10. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2″ (Put your second IMEI number)
11. Reboot your phone and check you IMEI number (Dial *#06#).
1. Install "MTK Engineering Mode" then Start App
2. Then go to MTK Settings
3. Go to Connectivity
4. Go to CDS Information
5. Go to Radio Information
6. Select Phone1
7. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1″ (Put your first IMEI number, check phone box or case for imei)
8. Hit send command and you will / may get a confirmation that "sent to mSend".
9. Now go back and select “Phone2″ (for the second IMEI number)
10. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2″ (Put your second IMEI number)
11. Reboot your phone and check you IMEI number (Dial *#06#).
There are two main steps:
1. Unlocking the Bootloader of the Gionee Elife S Plus
2. Flashing the Hovatek TWRP recovery.img and SuperSU.zip
• Download SuperSU 2.76.zip at Hovatek - Redirect page
• Copy SuperSU.zip to both the phone’s SD card and internal storage
• Download TWRP for Gionee Elife S Plus (Marshmallow) ported by Team Hovatek @ Hovatek - Redirect page
• Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe
• Unlock the Bootloader of the Gionee Elife S Plus using the guide at How to unlock the Bootloader of the Gionee Elife S Plus
• Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide)
• When the phone enters Fastboot, load the TWRP recovery to the phone by typing the command below then pressing Enter
fastboot boot recovery.img
• The phone should automatically boot into TWRP recovery mode
• In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY
• If TWRP offers to root the phone, select NO
• In TWRP recovery, tap Install
• Navigate to the location of the SuperSU2.76.zip and select it
• Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
• Reboot the phone normally
• Confirm Root by installing and running Root Checker
C'EST POUR LA V 6.0
1. Unlocking the Bootloader of the Gionee Elife S Plus
2. Flashing the Hovatek TWRP recovery.img and SuperSU.zip
• Download SuperSU 2.76.zip at Hovatek - Redirect page
• Copy SuperSU.zip to both the phone’s SD card and internal storage
• Download TWRP for Gionee Elife S Plus (Marshmallow) ported by Team Hovatek @ Hovatek - Redirect page
• Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe
• Unlock the Bootloader of the Gionee Elife S Plus using the guide at How to unlock the Bootloader of the Gionee Elife S Plus
• Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide)
• When the phone enters Fastboot, load the TWRP recovery to the phone by typing the command below then pressing Enter
fastboot boot recovery.img
• The phone should automatically boot into TWRP recovery mode
• In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY
• If TWRP offers to root the phone, select NO
• In TWRP recovery, tap Install
• Navigate to the location of the SuperSU2.76.zip and select it
• Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
• Reboot the phone normally
• Confirm Root by installing and running Root Checker
C'EST POUR LA V 6.0
