جميع تحديثات بوكس الريف فى موضوع واحد(متجدد)

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية


87151493586673301936.gif



هنا جميع تحديثات بوكس الريف
فى
موضوع واحد ومتجدد

بأذن الله


 

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية

farouk

:: مراقب سابق ::
إنضم
17 مارس 2012
المشاركات
680
مستوى التفاعل
2,381
النقاط
0
19.03.2012 RIFF JTAG – HTC EVO View 4G Unbrick, Unlock, IMEI and CID update supported


Repairing bricked HTC EvoView4G is easy using RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Some (or all) revisions of HTC EvoView4G boards have JTAG interface disabled (that is enable MARM JTAG Fuse is ****n in the MSM8255 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL to 1.38.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG4120000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE ****n then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC EvoView4G:

Solder JTAG cable to HTC EvoView4G JTAG pads;
Insert battery and connect USB Data cable;
Make sure HTC EvoView4G is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:

Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_evo_view_4g.jpg
 

hasni

مراقب قسم SonyEricsson, Se-Tool
إنضم
13 مارس 2012
المشاركات
4,600
مستوى التفاعل
15,444
النقاط
113
الإقامة
الشـــــــــ02ــــــلف
RIFF JTAG - Samsung P6810, HTC Sensation XL Supported and more !

21.03.2012 RIFF JTAG Box Updates:

Whats new:


Bug fixes:

  • Samsung Galaxy i9003 (3 new DLL, with adjusted I/O voltage levels)
  • SonyEricsson E15i (ROM not supported bug fixed)
Torrent Tracker:

Remote Helper:



Who rules the galaxy ?
biggrin.gif



www.jtagbox.com
 

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية
27.03.2012 RIFF JTAG – Samsung SCH-I500 Galaxy S Mesmerize/Fascinate Unbrick Supporte


Repairing bricked Samsung SCH-I500 Galaxy S Mesmerize/Fascinate is easy with RIFF Box.
I500 is based on the S5PCxxx Processor (ARM core is Cortex-A8). Please note the adaptive clocking mode (RTCK) is not available on this processor, so make sure to select a fixed TCK frequency.
To establish the JTAG connection attach battery cable and press Power On key.
In case after resurrection the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung I500:

  • Solder JTAG cable to Samsung I500 JTAG pads;
  • Attach battery cable and press Power On key;
  • Make sure Samsung I500 is selected in the list of models;
  • Make sure a fixed TCK frequency is selected;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state

 

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية
RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported





RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported

RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported


RIFF JTAG - eMMC Partition Plugin v1.0 Release


RIFF JTAG – eMMC Partition Plugin v1.0 (Qualcomm EBR-MBR based eMMC flash images processing)



Bug Fix

HTC_Sensation_PG58130.dll
-------------------------------------
- fixed bug due to which it said "Supplied data block to be flashed is damaged."





Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution

 

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية
03.04.2012 RIFF JTAG – Samsung Galaxy Mini – GT-S5570i Unbrick – Boot repair suppor


03.04.2012 RIFF JTAG – Samsung Galaxy Mini – GT-S5570i Unbrick – Boot repair supported
Repairing bricked Samsung S5570i is easy with RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung S5570i:

  • Solder JTAG cable to Samsung S5570i JTAG pads;
  • Connect USB cable to phone and PC;
  • Insert battery;
  • Make sure Samsung S5570i is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
  • If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.


03.04.2012 RIFF JTAG – Samsung GT-S5830i Unbrick – Boot Repair supported
Repairing bricked Samsung GT-S5830i is easy with RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung S5830i:

  • Solder JTAG cable to Samsung S5830i JTAG pads;
  • Connect USB cable to phone and PC;
  • Insert battery;
  • Make sure Samsung S5830i is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
  • If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On
 

AMINE-GSM

:: Super User ::, ,
إنضم
15 مارس 2012
المشاركات
988
مستوى التفاعل
2,944
النقاط
0
الإقامة
YELLEL
RIFF JTAG - HTC Flyer, Routers, Sat Receivers . . . :)

06.04.2012 RIFF JTAG Updates

Whats new:


Network Router support:


Satellite Receivers (STB-s):


  • Orton 4100C Unbrick, Read/Write Flash
  • EuroSky ES-4100 Unbrick, Read/Write Flash
HTC Phones support:

  • HTC Flyer Boot repair, Unlock, CID, ModelID, S-Off, IMEI Update
HTC Phones bug fix and updates:

  • HTC Sensation (HTC Pyramid) S-Off support added
  • HTC Evo 3D (HTC Shooter) S-Off support added
  • HTC Desire HD DBL reflash support added
  • HTC Desire Z DBL reflash support added
RIFF Torrent Tracker updates:

New HTC Full Backups torrent is uploaded and ready for seeding.

New files for following models:
HTC 7 Pro (tested with hspl)
HTC Evo 3D (for Liteon camera)
HTC Desire HD
(hboot 2.00 with fix for network problem)
HTC Sensation

HTC Kaiser
HTC Surround
HTC Incredible S

Complete list of files:
 

halfa40gsm

عضو أساسي
إنضم
15 مارس 2012
المشاركات
258
مستوى التفاعل
772
النقاط
93
الإقامة
الجزائر
RIFF JTAG - HTC via USB cable supported

24.04.2012 RIFF JTAG – HTC via USB Cable Support added


Whats new:

Released support for HTC phones based on MSM8x55 CPU, which are enumerated on USB port as “QHUSB_DLOAD” device. Now it’s possible to repair these phones without soldering any wires. Even without opening !

Following models are supported at the moment:

  • HTC Desire HD (HTC Ace)
  • HTC Desire S (HTC Saga)
  • HTC Desire Z (HTC Vision)
  • HTC Flyer 3G
  • HTC Flyer WiFi
  • HTC Evo View 4G
It is possible to force QHUSB_DLOAD mode by disabling Vdd line on eMMC chip. Check Desire S TP info for example. This means, You can work with any MSM8255/MSM8655 based HTC phone, as long as You force it into QHUSB_DLOAD mode.
Follow this procedure if You want to use these updates:



  • Connect Your phone to USB port and install QHUSB_DLOAD device driver (C:\Program Files (x86)\RIFF Box JTAG Manager\Drivers\32Bit\QDLOADER)
  • Launch JTAG Manager, select appropriate Model DLL and click desired button
  • Install “RIFF Box DCCLoader USB Interface” port driver (C:\Users\Admin\Desktop\Drivers_64Bit_WorkedForMe\ Drivers\64Bit\DCCLDR)
  • If required, repeat the procedure (sometimes required if device is connected for first time)
We will release USB support for rest of the models on these CPU-s in following days.

To download and install new updates – simply click “Check for Updates” button on Box Service TAB.
 

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية
RIFF JTAG - HTC via USB cable 5 more models supported




  • HTC Thunderbolt USB support added
  • HTC Sensation XL USB support added
  • HTC Inspire USB support added
  • HTC Incredible S USB support added
  • HTC Incredible 2 USB support added
These new updates will allow You to use USB cable to perform any operation on listed models. Remember that this work if Your phone is enumerated on USB port as QHUSB_Dload or Qualcomm HS-USB QDLoader device.
In case phone is not enumerated, You might need to use test point method first.

Please visit RIFF FAQ section in to see how to install drivers, and how to find eMMC Vdd test points:

If You need to repair phone after replacing eMMC chip, these are the steps:

  • Launch eMMC MBR/EBR partitioning tool
  • Open desired partitioning file
  • Click “Load Image from file”
  • Click “Repartition eMMC”
  • Close the eMMC plugin
  • Click “Resurrection” and select all options to be repaired, including IMEI and CID
  • Click “Resurrect”
http://www.jtagbox.com/wp-content/up...ull_repair.jpg

Please click “Check for updates” button to download and install new updates.


www.jtagbox.com

 

zahaf

مراقب قسم Apple
إنضم
21 مارس 2012
المشاركات
4,160
مستوى التفاعل
13,651
النقاط
0
الإقامة
mostaganem
RIFF JTAG - Samsung updates !

11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbrick – dead boot repair supported

Repairing bricked Samsung SPH-D710 Galaxy S2 Epic Touch 4G is easy with RIFF Box. Samsung SPH-D710 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SPH-D710:
  • Solder JTAG cable to Samsung SPH-D710 JTAG pads;
  • Connect USB cable to phone and PC;
  • Insert battery;
  • Make sure Samsung SPH-D710 is selected in the list of models;
  • Make sure a fixed TCK frequency is selected;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

fitjsf9mw3z6tly5ludo.jpg

 

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية
RIFF JTAG - Weekend Updates

18.05.2012 RIFF JTAG – Weekend updates:

Whats new:

  • Samsung B7320 unbrick/boot repair support added
  • HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
  • HTC Sensation (PG581300/PG583101) Unlock support added
  • HTC Evo 3D Unlock support added
Bug Fix updates:

  • HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)
  • HTC Wildfire S Proximity sensor fix
RIFF Torrent tracker:

Please click “Check for updates” button in RIFF JTAG Manager to download new files.

RIFF Box FAQ:



www.jtagbox.com
 

khaledrepa

مراقب اقسام السوفت ويير
إنضم
14 مارس 2012
المشاركات
1,595
مستوى التفاعل
6,696
النقاط
0
الإقامة
الجزائر الغالية
31.08.2012 RIFF JTAG – Fly IQ285 unbrick – boot repair supported



Repairing bricked Fly IQ285 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector reflashes radio’s boot zones. There are options to reflash BOOT and RECOVERY zones.

To resurrect Fly IQ285:
  • Solder JTAG cable to Fly IQ285 JTAG pads;
  • Insert batter and connect USB Data cable;
  • Make sure Fly IQ285 is selected in the list of models;
  • If you use only battery, press Power On key;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold ‘Volume Down’ key and press ‘Power ON’ button.
.

 

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113

himihicham

عضو أساسي
إنضم
25 فبراير 2013
المشاركات
296
مستوى التفاعل
316
النقاط
0
الإقامة
maroc
تحديثات جديدة للعملاق الريف بوكس

http://www.riffbox.org

Mar.29, 2013

RIFF JTAG – NTT DoCoMo Samsung Galaxy S III LTE SC-06D Unbrick – Dead boot repair supported

RIFF JTAG – HTC ******s Phone 8X (HTC Accord) Unbrick, Dead boot IMEI repair supported

RIFF JTAG – HTC EVO Design 4G PH4430(HTC Kingdom) Unbrick, Unlock, IMEI, SuperCID repair supported

RIFF JTAG – LG E405 Optimus L3 Dual Unbrick – Dead boot repair supported

RIFF JTAG – LG E615 Optimus L5 Dual Unbrick – Dead boot repair supported

RIFF JTAG – Samsung GT-i8190 Galaxy S III Mini Unbrick – Dead boot repair supported

RIFF JTAG – Samsung SHW-M200K NEXUS S Unbrick – Dead boot repair supported

RIFF JTAG – Pantech Vega R3 IM-A850S Unbrick – Dead boot repair supported

RIFF JTAG – ZTE Skate Unbrick – Dead boot repair supported

RIFF JTAG – ZTE AC30 USB modem unbrick – dead boot repair supported

RIFF Box JTAG Manager software setup
 

himihicham

عضو أساسي
إنضم
25 فبراير 2013
المشاركات
296
مستوى التفاعل
316
النقاط
0
الإقامة
maroc
تحديثات جديدة للعملاق الريف بوكس

http://www.jtagbox.com/

May.27, 2013


RIFF JTAG – HTC Desire SV T326e (HTC Magni) Unbrick – Dead boot repair supported



27.05.2013 RIFF JTAG – HTC J ISW13HT (HTC Valente) Unbrick – Dead boot repair supported




27.05.2013 RIFF JTAG – Samsung GT-i9105 Galaxy S II Plus Unbrick – Dead boot repair supported




27.05.2013 RIFF JTAG – Samsung GT-i9082 Galaxy Grand Duos (Samsung Baffin) Unbrick – Dead boot repair supported





27.05.2013 RIFF JTAG – Samsung Gt-S5380k Wave Y Unbrick – Dead boot repair supported
 
التعديل الأخير:
أعلى