R3 Tool Pro

النتائج 1 إلى 1 من 1

الموضوع: فلاش 103 rm-1035

  1. #1
    deihmi غير متواجد حالياً
    عضو اساسي
    تاريخ التسجيل
    Sep 2012
    المشاركات
    836
    معدل تقييم المستوى
    21
    شكراً
    1
    تم شكره
    1,347

    افتراضي فلاش 103 rm-1035

    card found: S/N A285XXXXXXX
    registered to: deihmi

    Connect phone on selected interface...

    Core : v2.10 , MTKx FlashEngine : v8.1

    Verify files ...
    MAUI : RM-1035_ROM_eMP_10.01.11
    VIVA : RM-1035_VIVA_eMP_10.01.11
    LANG : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    CUST : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    JMPT : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    - > MODE : FullFlash

    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
    - > If phone can't switch to BL - use battery or flash from Local mode!

    --- Insert USB cable now! ---
    Wait for phone...
    Device boot not done
    Check Drivers
    Try again

    Boot Error
    Flashing failed!
    Connect phone on selected interface...


    Core : v2.10 , MTKx FlashEngine : v8.1

    Verify files ...
    MAUI : RM-1035_ROM_eMP_10.01.11
    VIVA : RM-1035_VIVA_eMP_10.01.11
    LANG : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    CUST : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    JMPT : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    - > MODE : FullFlash

    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
    - > If phone can't switch to BL - use battery or flash from Local mode!

    --- Insert USB cable now! ---
    Wait for phone...
    Device boot not done
    Check Drivers
    Try again

    Boot Error
    Flashing failed!
    Connect phone on selected interface...


    Core : v2.10 , MTKx FlashEngine : v8.1

    Verify files ...
    MAUI : RM-1035_ROM_eMP_10.01.11
    VIVA : RM-1035_VIVA_eMP_10.01.11
    LANG : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    CUST : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    JMPT : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    - > MODE : FullFlash

    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
    - > If phone can't switch to BL - use battery or flash from Local mode!

    --- Insert USB cable now! ---
    Wait for phone...
    Device boot not done
    Check Drivers
    Try again

    Boot Error
    Flashing failed!
    Connect phone on selected interface...


    Core : v2.10 , MTKx FlashEngine : v8.1

    Verify files ...
    MAUI : RM-1035_ROM_eMP_10.01.11
    VIVA : RM-1035_VIVA_eMP_10.01.11
    LANG : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    CUST : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    JMPT : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    - > MODE : FullFlash

    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
    - > If phone can't switch to BL - use battery or flash from Local mode!

    --- Insert USB cable now! ---
    Wait for phone...
    Device boot not done
    Check Drivers
    Try again

    Boot Error
    Flashing failed!
    Connect phone on selected interface...


    Core : v2.10 , MTKx FlashEngine : v8.1

    Verify files ...
    MAUI : RM-1035_ROM_eMP_10.01.11
    VIVA : RM-1035_VIVA_eMP_10.01.11
    LANG : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    CUST : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    JMPT : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    - > MODE : FullFlash

    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
    - > If phone can't switch to BL - use battery or flash from Local mode!

    --- Insert USB cable now! ---
    Wait for phone...
    Phone found! [ 45 ]
    Sync...
    Sync Ok, read regs...
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6260
    BB_CPU_HW : CB00
    BB_CPU_SW : 0000
    BB_CPU_SB : 8000
    BB_CPU_NM : [MediaTek] MT6260_S0001
    BB_CPU_SN : 283AF80D4EABD1DA65B3454B537DCA01
    BROM Protocol Version : 05
    BROM Status : 0000
    Comm Status : 0000
    EXBL Status : Alive [ USB Load Active ]
    Switch to BL done
    BL Version : 01
    Setting...
    Setting done , result code 0x8000
    Project ID : CRYSTAL.10.01.11.p2
    BROM/BL stage done
    Seek and prepare DownloadAgent
    DownloadAgent matching HW Found!
    DA verify and select done
    Sending DA to target ...
    DA_eMP_Crystal.fg
    DA_VERIFY : 00
    DA_JUMP : 00040000
    DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
    DA_CSTAT : 0x5A
    SOC Verify failed!
    Error Code : 0x00
    Connect phone on selected interface...

    Boot Error
    Flashing failed!
    Connect phone on selected interface...


    Core : v2.10 , MTKx FlashEngine : v8.1

    Verify files ...
    MAUI : RM-1035_ROM_eMP_10.01.11
    VIVA : RM-1035_VIVA_eMP_10.01.11
    LANG : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    CUST : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    JMPT : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    - > MODE : FullFlash

    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
    - > If phone can't switch to BL - use battery or flash from Local mode!

    --- Insert USB cable now! ---
    Wait for phone...
    Phone found! [ 45 ]
    Sync...
    Initial Boot Failed (Sync Error)
    Connect phone on selected interface...

    Boot Error
    Flashing failed!
    Connect phone on selected interface...


    Core : v2.10 , MTKx FlashEngine : v8.1

    Verify files ...
    MAUI : RM-1035_ROM_eMP_10.01.11
    VIVA : RM-1035_VIVA_eMP_10.01.11
    LANG : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    CUST : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    JMPT : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    - > MODE : FullFlash

    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
    - > If phone can't switch to BL - use battery or flash from Local mode!

    --- Insert USB cable now! ---
    Wait for phone...
    Phone found! [ 45 ]
    Sync...
    Sync Ok, read regs...
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6260
    BB_CPU_HW : CB00
    BB_CPU_SW : 0000
    BB_CPU_SB : 8000
    BB_CPU_NM : [MediaTek] MT6260_S0001
    BB_CPU_SN : 283AF80D4EABD1DA65B3454B537DCA01
    BROM Protocol Version : 05
    BROM Status : 0000
    Comm Status : 0000
    EXBL Status : Alive [ USB Load Active ]
    Switch to BL done
    BL Version : 01
    Setting...
    Setting done , result code 0x8000
    Project ID : CRYSTAL.10.01.11.p2
    BROM/BL stage done
    Seek and prepare DownloadAgent
    DownloadAgent matching HW Found!
    DA verify and select done
    Sending DA to target ...
    DA_eMP_Crystal.fg
    DA_VERIFY : 00
    DA_JUMP : 00040000
    DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
    DA_CSTAT : 0x5A
    SOC_VERIFY : 0xC1
    BOOT_STYLE : SF_FLASH_BOOT
    NOR Flash IC initialized
    [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
    [0] : FLASH_DIE : 00EF 0040 0016 0000
    [0] : FLASH_LEN : 0x00400000
    FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
    SecureDecrypt : RM-1035_ROM_eMP_10.01.11
    SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
    SecureDecrypt : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    SecureDecrypt : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    SecureDecrypt : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    OVRLP : 000069B900000001
    PHPID : CRYSTAL.10.01.11.p2
    OVRLP : 00004DF900000001
    DA : FORMAT_BIN
    Processing Flash Pre-format
    FILES : 5
    SAFE_BLOCK : 04
    FORMAT_BIN : Ok
    ERASE_MAUI_INFO : 0x0001C000
    WRITE_STYLE : DEF : 0x01 (SEQ)
    Write : RM-1035_ROM_eMP_10.01.11
    Write : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    Write : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    Write : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    Write : RM-1035_VIVA_eMP_10.01.11
    CODE_DNLOAD : Ok
    [VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
    [VERIFY] DONE : RM-1035_LANG_PACK_ROM_IC_eMP_10.01.11_001
    [VERIFY] DONE : RM-1035_CUSTPACK_ROM_IC_MEA_MA_eMP_10.01.11_001
    [VERIFY] DONE : RM-1035_JUMP_TABLE_IC_MEA_MA_eMP_10.01.11_001
    [VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
    CODE_VERIFY : Ok
    FORMAT FFS : skipped
    Rebooting phone now

    Flashing done!
    Total flash time : 00:00:55
    Reboot phone Ok

    Connect phone on selected interface...

  2. الأعضاء الذين قالوا شكراً لـ deihmi على المشاركة المفيدة:


المواضيع المتشابهه

  1. فلاشات : فلاشة نوكيا 130 rm-1035 فيرجن 10.01.11
    بواسطة abdjamel في المنتدى قسم فلاشات النوكيا nokia
    مشاركات: 10
    آخر مشاركة: 09-24-2017, 09:24
  2. مشكل نوكيا 130 rm-1035
    بواسطة rzouga في المنتدى قسم فلاشات النوكيا nokia
    مشاركات: 12
    آخر مشاركة: 07-05-2017, 08:43
  3. 28/08/2014 [FURIOUSGOLD] OTZFlasher v1.0.0.1404 - OT-1035/OT-2007/OT-2012/VM585
    بواسطة GSM News في المنتدى أخر أخبار وتحديثات GSM News & Updates
    مشاركات: 0
    آخر مشاركة: 08-28-2014, 14:30

الكلمات الدلالية لهذا الموضوع

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
الأرشيف | الاتصال بنا | Privacy-Policy