تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
Condor C7 PGN506

انشاء ملف SRF لـ[Condor C7 [PGN-506

كود:
Device       : CoreID_008050E1
Core         : Custom Loader
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT              (00000000, 00020000)	64 MB
P01: modem            (00020000, 00020000)	64 MB
P02: sbl1             (00040000, 00000200)	256 KB
P03: sbl1bak          (00040200, 00000200)	256 KB
P04: sdi              (00040400, 00000040)	32 KB
P05: DDR              (00060000, 00000040)	32 KB
P06: aboot            (00080000, 00000400)	512 KB
P07: abootbak         (00080400, 00000400)	512 KB
P08: rpm              (00080800, 000003E8)	500 KB
P09: rpmbak           (00080BE8, 000003E8)	500 KB
P10: boot             (000A0000, 00008000)	16 MB
P11: tz               (000C0000, 000003E8)	500 KB
P12: tzbak            (000C03E8, 000003E8)	500 KB
P13: pad              (000C07D0, 00000800)	1024 KB
P14: modemst1         (000C0FD0, 00000C00)	1536 KB
P15: modemst2         (000C1BD0, 00000C00)	1536 KB
P16: system           (000E0000, 0029999A)	1331 MB
P17: persist          (0037999A, 00010000)	32 MB
P18: cache            (0038999A, 00040000)	128 MB
P19: recovery         (003C999A, 00008000)	16 MB
P20: misc             (003E0000, 00000800)	1024 KB
P21: fsg              (00400000, 00000C00)	1536 KB
P22: fsc              (00420000, 00000002)	1024 b
P23: ssd              (00420002, 00000010)	8 KB
P24: splash           (00440000, 00005000)	10 MB
P25: usbmsc           (00460000, 01000000)	8 GB
P26: userdata         (01460000, 008BEFDF)	4.373 GB
Please select file.
Added partition GPT to constructor file.
Added partition modem to constructor file.
Added partition sbl1 to constructor file.
Added partition sbl1bak to constructor file.
Added partition sdi to constructor file.
Added partition DDR to constructor file.
Added partition aboot to constructor file.
Added partition abootbak to constructor file.
Added partition rpm to constructor file.
Added partition rpmbak to constructor file.
Added partition boot to constructor file.
Added partition tz to constructor file.
Added partition tzbak to constructor file.
Added partition pad to constructor file.
Added partition modemst1 to constructor file.
Added partition modemst2 to constructor file.
Added partition system to constructor file.
Added partition persist to constructor file.
Added partition cache to constructor file.
Added partition recovery to constructor file.
Added partition misc to constructor file.
Added partition fsg to constructor file.
Added partition fsc to constructor file.
Added partition ssd to constructor file.
Added partition splash to constructor file.
Added partition usbmsc to constructor file.
Added partition userdata to constructor file.
SRF "D:/1/SRF C7/Condor_C7_[PGN-506]_MSM8926_USB_FULL_IMAGE_By_DZ-DEVELOPER.srf" has been installed successfully.
Opening D:/1/SRF C7/New folder/CoreID_008050E1_10_09_2018_11_17_15.bin file...
Reading. Please wait... Done.
Elapsed time 00:22:07 
SW: 1.6.6; FW: 1.24.
Disconnected.
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

Samsung G532G Boot Repair Done

955391929.png

Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID : 90014A4838473475920135C4BA2A5425
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 35C4BA2A
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 393216
Number of sectors : 6307840
Device Manufacturer :samsung
Device Platform :mt6737t
Build ID :MMB29T
Display Build ID :MMB29T.G532GDXU1APJ7
Release ID :6.0.1
Device Model :SM-G532G
Device Name :grandppltedx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :grandppltedx-user 6.0.1 MMB29T G532GDXU1APJ7 release-keys

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G4u_17_10_2019_03_11_21.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: BOTA0 (00002000, 00002000) 4 MB
P02: nvram (00004000, 00004000) 8 MB
P03: lk (00008000, 00001000) 2048 KB
P04: BOTA1 (00009000, 00001000) 2048 KB
P05: secro (0000A000, 00003800) 7 MB
P06: seccfg (0000D800, 00000400) 512 KB
P07: efuse (0000DC00, 00000400) 512 KB
P08: tee1 (0000E000, 00003000) 6 MB
P09: BOTA2 (00011000, 00003000) 6 MB
P10: EFS (00014000, 00004000) 8 MB
P11: nvdata (00018000, 00010000) 32 MB
P12: PARAM (00028000, 00004000) 8 MB
P13: recovery (0002C000, 00008000) 16 MB
P14: boot (00034000, 00008000) 16 MB
P15: md1img (0003C000, 00010000) 32 MB
P16: md1dsp (0004C000, 00002000) 4 MB
P17: keystore (0004E000, 00004000) 8 MB
P18: omekeystore (00052000, 00001C00) 3584 KB
P19: proinfo (00053C00, 00001400) 2560 KB
P20: para (00055000, 00000400) 512 KB
P21: PERSISTENT (00055400, 00000400) 512 KB
P22: STEADY (00055800, 00000800) 1024 KB
P23: protect1 (00056000, 00004000) 8 MB
P24: protect2 (0005A000, 00004000) 8 MB
P25: RESERVE2 (0005E000, 00002000) 4 MB
P26: system (00060000, 00604000) 3080 MB
P27: cache (00664000, 000C8000) 400 MB
P28: hidden (0072C000, 0001E000) 60 MB
P29: userdata (0074A000, 00744000) 3720 MB
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition... Done.

Switched to user area.
Writing GPT partition... Done.
Writing bota0 partition... Done.
Writing lk partition... Done.
Writing bota1 partition... Done.
Writing secro partition... Done.
Writing seccfg partition... Done.
Writing efuse partition... Done.
Writing tee1 partition... Done.
Writing bota2 partition... Done.
Writing efs partition... Done.
Writing param partition... Done.
Writing recovery partition... Done.
Writing boot partition... Done.
Writing md1img partition... Done.
Writing md1dsp partition... Done.
Writing keystore partition... Done.
Writing omekeystore partition... Done.
Writing proinfo partition... Done.
Writing para partition... Done.
Writing persistent partition... Done.
Writing steady partition... Done.

Smart Repair is successfully complete.
SW: 1.7.7; FW: 1.24.
Disconnected.
 
التعديل الأخير:

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

repair boot oppo a37f
p_139487mit1.png
 
التعديل الأخير:

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

Samsung J200H Boot Repair Done

p_1401coi4v1.png

[video=youtube;cg1g_YGzj7Y]https://www.youtube.com/watch?v=cg1g_YGzj7Y&t=38s[/video]
 

anonymous

عضو
إنضم
12 مايو 2012
المشاركات
19
مستوى التفاعل
28
النقاط
0
الإقامة
سي مسطفى بومرداس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

Repair Boot Samsung j200h Done


p_14143r8ks1.png



كود:
Welcome to Octoplus Pro JTAG Software version 1.7.7. 
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0
Downloaded file D:/flash/box/medusa/firmwareFolder/(BOOT1 SAMSUNG SM-J200H) HYNIX EMMC H8G4T!.BIN.
Downloaded file D:/flash/box/medusa/firmwareFolder/(BOOT2 SAMSUNG SM-J200H) HYNIX EMMC H8G4T!.BIN.
Downloaded file D:/flash/box/medusa/firmwareFolder/(EXT_CSD SAMSUNG SM-J200H) HYNIX EMMC H8G4T!.BIN.
Downloaded file D:/flash/box/medusa/firmwareFolder/(LIVE_LOG SAMSUNG SM-J200H) HYNIX EMMC H8G4T!.TXT.
Downloaded and installed file D:/flash/box/medusa/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : Samsung
Model     : SM-J200H
SRF       : D:/flash/box/medusa/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : Samsung
Model     : SM-J200H
SRF       : D:/flash/box/medusa/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Hynix eMMC H8G4t!
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 90014A4838473474210120946D127367
Manufacturer ID       : 0X90
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X4A
Product name          : H8G4t!
Product revision      : 0.1
Product serial number : (hex) 20946D12
Manufacturing date    : 07/2016
---------------------------------------------------------------
CSD Info

CSD                   : D07F01320F5903FFFFFFFFEF8A400013
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/H8G4t!_15_11_2019_11_49_32.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT              (00000000, 00002000)	4 MB
P01: SBOOT            (00002000, 00001000)	2048 KB
P02: SBOOT2           (00003000, 00001000)	2048 KB
P03: wfixnv1          (00004000, 00000800)	1024 KB
P04: wfixnv2          (00004800, 00000800)	1024 KB
P05: tdfixnv1         (00005000, 00000800)	1024 KB
P06: tdfixnv2         (00005800, 00000800)	1024 KB
P07: WDSP             (00006000, 00002000)	4 MB
P08: MODEM            (00008000, 00004000)	8 MB
P09: MODEM2           (0000C000, 00004000)	8 MB
P10: TDDSP            (00010000, 00002000)	4 MB
P11: FOTA_SIG         (00012000, 00000800)	1024 KB
P12: wruntimenv1      (00012800, 00000800)	1024 KB
P13: wruntimenv2      (00013000, 00000800)	1024 KB
P14: tdruntimenv1     (00013800, 00000800)	1024 KB
P15: tdruntimenv2     (00014000, 00000800)	1024 KB
P16: PARAM            (00014800, 00001000)	2048 KB
P17: efs              (00015800, 0000A000)	20 MB
P18: prodnv           (0001F800, 00002800)	5 MB
P19: RESERVED2        (00022000, 00001000)	2048 KB
P20: KERNEL           (00023000, 00008000)	16 MB
P21: RECOVERY         (0002B000, 00008000)	16 MB
P22: PERSISTENT       (00033000, 00000800)	1024 KB
P23: persdata         (00033800, 00004800)	9 MB
P24: CACHE            (00038000, 00064000)	200 MB
P25: SYSTEM           (0009C000, 002EE000)	1500 MB
P26: HIDDEN           (0038A000, 0000F000)	30 MB
P27: userdata         (00399000, 00AF0000)	5.469 GB
Repairing from file "D:/flash/box/medusa/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition...	Done.

Switched to boot area partition 2.
Writing BOOT2 partition...	Done.

Switched to user area.
Writing GPT partition...	Done.
Writing SBOOT partition...	Done.
Writing SBOOT2 partition...	Done.
Writing wfixnv1 partition...	Done.
Writing wfixnv2 partition...	Done.
Writing tdfixnv1 partition...	Done.
Writing tdfixnv2 partition...	Done.
Writing WDSP partition...	Done.
Writing MODEM partition...	Done.
Writing MODEM2 partition...	Done.
Writing TDDSP partition...	Done.
Writing FOTA_SIG partition...	Done.
Writing wruntimenv1 partition...	Done.
Writing wruntimenv2 partition...	Done.
Writing tdruntimenv1 partition...	Done.
Writing tdruntimenv2 partition...	Done.
Writing PARAM partition...	Done.
Writing efs partition...	Done.
Writing prodnv partition...	Done.
Writing RESERVED2 partition...	Done.
Writing KERNEL partition...	Done.
Writing RECOVERY partition...	Done.
Writing PERSISTENT partition...	Done.
Writing persdata partition...	Done.

Smart Repair is successfully complete.
SW: 1.7.7; FW: 1.24.
Disconnected.
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
رد: Levitra Prix En Officine EllOresia

Bentyl Website Without Perscription Cialis Comprar Cialis Original Foro <a href=http://cialibuy.com>Cialis</a> Cialis 20mg Lilly Kaufen
السلام عليكم
هنا توضع تجارب الاعضاء الناجحة
لا ادري مادا تفعل
قوانين المنتدى
https://www.dzgsm.com/vb/threads/39510/
انتبه قد يتم حضر حسابك او ايقاف العضوية
سلام
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

انشاء ملف Condor_A8-PGN611 / SRF

كود:
Device       : 
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.0.4; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: nvram            (00001C00, 00002800)	5 MB
P03: protect1         (00004400, 00005000)	10 MB
P04: protect2         (00009400, 00005000)	10 MB
P05: lk               (0000E400, 00000400)	512 KB
P06: para             (0000E800, 00000400)	512 KB
P07: boot             (0000EC00, 00008000)	16 MB
P08: recovery         (00016C00, 00008000)	16 MB
P09: logo             (0001EC00, 00004000)	8 MB
P10: expdb            (00022C00, 00005000)	10 MB
P11: seccfg           (00027C00, 00000400)	512 KB
P12: oemkeystore      (00028000, 00001000)	2048 KB
P13: secro            (00029000, 00003000)	6 MB
P14: keystore         (0002C000, 00004000)	8 MB
P15: tee1             (00030000, 00002800)	5 MB
P16: tee2             (00032800, 00002800)	5 MB
P17: frp              (00035000, 00000800)	1024 KB
P18: nvdata           (00035800, 00010000)	32 MB
P19: metadata         (00045800, 00012800)	37 MB
P20: system           (00058000, 00780000)	3840 MB
P21: cache            (007D8000, 000C8000)	400 MB
P22: userdata         (008A0000, 03195C00)	24.79 GB
P23: flashinfo        (03A35C00, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Octoplus Pro JTAG Software/Backups/_nvdata_0x35800_0x10000_04_02_2020_00_37_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:05 
SW: 2.0.4; FW: 1.24.
Added partition GPT to constructor file.
Added partition proinfo to constructor file.
Added partition nvram to constructor file.
Added partition protect1 to constructor file.
Added partition protect2 to constructor file.
Added partition lk to constructor file.
Added partition para to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition logo to constructor file.
Added partition expdb to constructor file.
Added partition seccfg to constructor file.
Added partition oemkeystore to constructor file.
Added partition secro to constructor file.
Added partition keystore to constructor file.
Added partition tee1 to constructor file.
Added partition tee2 to constructor file.
Added partition frp to constructor file.
Added partition nvdata to constructor file.
Added partition metadata to constructor file.
Added partition system to constructor file.
Added partition cache to constructor file.
Added partition userdata to constructor file.
Added partition GPT to constructor file.
Added partition proinfo to constructor file.
Added partition nvram to constructor file.
Added partition protect1 to constructor file.
Added partition protect2 to constructor file.
Added partition lk to constructor file.
Added partition para to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition logo to constructor file.
Added partition expdb to constructor file.
Added partition seccfg to constructor file.
Added partition oemkeystore to constructor file.
Added partition secro to constructor file.
Added partition keystore to constructor file.
Added partition tee1 to constructor file.
Added partition tee2 to constructor file.
Added partition system to constructor file.
Added partition flashinfo to constructor file.
SRF "C:/Users/Gsm-Mohamed/Desktop/Condor_A8-PGN611.srf" has been installed successfully.
 

sempal

عضو أساسي
إنضم
28 يونيو 2012
المشاركات
486
مستوى التفاعل
277
النقاط
63
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

السلام عليكم اخواني ممكن طريقة انشاء ملف srf للهواتف
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

انشاء ملف Lava Iris702 / SRF
كود:
Welcome to Medusa Pro Software version 2.0.6. 
Started.
Reader #0: Generic EMV Smartcard Reader 0

[B]Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Connecting...
Detecting Chip Version...
HW Chip : MT6580
HW Version : 8A00.CA00.0000.0000
Brom Version: FF
Boot Loader Version: 01
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: 15010046.3732324D.4200EF25.E4A7A311
eMMC Flash: Samsung: F722MB
DA ver : 4.2.9c
Initializing Memory Flash...
Initialization completed
Sending Loader...
Loader successfully sent
Reading Flash Info...
EMMC rpmb size       : 0 Mb
EMMC boot1 size      : 4 Mb
EMMC boot2 size      : 4 Mb
EMMC gp1 size        : 0 Mb
EMMC gp2 size        : 0 Mb
EMMC gp3 size        : 0 Mb
EMMC gp4 size        : 0 Mb
EMMC user area size  : 7456 Mb
Internal RAM size    : 128 Kb
External RAM size    : 1024 Mb
Device       : 
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.0.6; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: nvram            (00001C00, 00002800)	5 MB
P03: protect1         (00004400, 00005000)	10 MB
P04: protect2         (00009400, 00005000)	10 MB
P05: seccfg           (0000E400, 00000200)	256 KB
P06: lk               (0000E600, 00000300)	384 KB
P07: boot             (0000E900, 00008000)	16 MB
P08: recovery         (00016900, 00008000)	16 MB
P09: para             (0001E900, 00000400)	512 KB
P10: logo             (0001ED00, 00004000)	8 MB
P11: expdb            (00022D00, 00005000)	10 MB
P12: nvdata           (00027D00, 00010000)	32 MB
P13: metadata         (00037D00, 00010300)	32.38 MB
P14: oemkeystore      (00048000, 00001000)	2048 KB
P15: secro            (00049000, 00003000)	6 MB
P16: keystore         (0004C000, 00004000)	8 MB
P17: system           (00050000, 00500000)	2560 MB
P18: cache            (00550000, 00080000)	256 MB
P19: userdata         (005D0000, 008B7C00)	4.359 GB
P20: flashinfo        (00E87C00, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_nvdata_0x27d00_0x10000_22_03_2020_14_28_41.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:09 
SW: 2.0.6; FW: 1.24.
Added partition GPT to constructor file.
Added partition proinfo to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition logo to constructor file.
Added partition nvdata to constructor file.
Added partition system to constructor file.[/B]
SRF "C:/Users/Mohamed/Desktop/Lava Iris_702.srf" has been installed successfully.
 

dawmi

عضو أساسي
إنضم
6 أغسطس 2018
المشاركات
825
مستوى التفاعل
105
النقاط
43
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

انشاء ملفsrfcondor P6 Plus PGN522
كود:
SW: 2.0.7; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: nvram            (00001C00, 00002800)	5 MB
P03: protect1         (00004400, 00005000)	10 MB
P04: protect2         (00009400, 00005000)	10 MB
P05: lk               (0000E400, 00000400)	512 KB
P06: para             (0000E800, 00000400)	512 KB
P07: boot             (0000EC00, 00008000)	16 MB
P08: recovery         (00016C00, 00008000)	16 MB
P09: logo             (0001EC00, 00004000)	8 MB
P10: expdb            (00022C00, 00005000)	10 MB
P11: seccfg           (00027C00, 00000400)	512 KB
P12: oemkeystore      (00028000, 00001000)	2048 KB
P13: secro            (00029000, 00003000)	6 MB
P14: keystore         (0002C000, 00004000)	8 MB
P15: tee1             (00030000, 00002800)	5 MB
P16: tee2             (00032800, 00002800)	5 MB
P17: frp              (00035000, 00000800)	1024 KB
P18: nvdata           (00035800, 00010000)	32 MB
P19: metadata         (00045800, 00012800)	37 MB
P20: system           (00058000, 00700000)	3584 MB
P21: cache            (00758000, 000C8000)	400 MB
P22: userdata         (00820000, 014F6C00)	10.48 GB
P23: flashinfo        (01D16C00, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FE12MB_nvdata_0x35800_0x10000_25_03_2020_15_09_15.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:13 
SW: 2.0.7; FW: 1.24.

Switched to boot area partition 1.
Added partition BOOT1 to constructor file.

Switched to boot area partition 2.
Added partition BOOT2 to constructor file.

Switched to user area.
Added partition GPT to constructor file.
Added partition protect1 to constructor file.
Added partition protect2 to constructor file.
Added partition lk to constructor file.
Added partition para to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition logo to constructor file.
Added partition expdb to constructor file.
Added partition seccfg to constructor file.
Added partition oemkeystore to constructor file.
Added partition secro to constructor file.
Added partition keystore to constructor file.
Added partition tee1 to constructor file.
Added partition tee2 to constructor file.
Added partition frp to constructor file.
Added partition nvdata to constructor file.
Added partition metadata to constructor file.
Added partition cache to constructor file.
Added partition flashinfo to constructor file.
SRF "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/condor_PGN522.srf" has been installed successfully.
رابط التحميل https://mega.nz/#!wb5lXLYZ!QPpfm13bro1dX9GbCuK0Pw03BbTz9TxT1tV_l3FwHko
 
التعديل الأخير:

.:: Bouamama _ Gsm ::.

:: مشرف ::, :: قسم السوفت ويير والبرمجة ::, ,
إنضم
29 أبريل 2015
المشاركات
1,233
مستوى التفاعل
584
النقاط
0
الإقامة
TLEMCEN
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

إصلاح بوت g532f

704996414.png

 

f0ou4d

:: Super User::, ,
إنضم
21 سبتمبر 2013
المشاركات
545
مستوى التفاعل
1,373
النقاط
93
الإقامة
العالم الثالث
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

Remove Pattern Lock OPPO A1K CPH 1923
160069363706521.jpg
 

f0ou4d

:: Super User::, ,
إنضم
21 سبتمبر 2013
المشاركات
545
مستوى التفاعل
1,373
النقاط
93
الإقامة
العالم الثالث
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

OPPO F11 pro CPH 1969 reset

160122408751831.jpg
 

f0ou4d

:: Super User::, ,
إنضم
21 سبتمبر 2013
المشاركات
545
مستوى التفاعل
1,373
النقاط
93
الإقامة
العالم الثالث
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

OPPO A7 CPH 1901 reset

كود:
Welcome to Medusa Pro Software version 2.1.3. 
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Alcor Micro USB Smart Card Reader 2
Reader #3: Alcor Micro USB Smart Card Reader 3
Reader #4: FT SCR2000 0
Reader #5: FT SCR2000 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC RH64AB
Page size    : 512 B
Block size   : 512 B
Block count  : 122142720
Size         : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 1501005248363441420523E19A8F86C9
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : RH64AB
Product revision      : 0.5
Product serial number : (hex) 23E19A8F
Manufacturing date    : 08/2019
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RH64AB_08_10_2020_19_13_56.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.3; FW: 1.24.
P00: GPT              (00000000, 00000028)	20 KB
P01: oppodycnvbk      (00000028, 00005000)	10 MB
P02: oppostanvbk      (00005028, 00005000)	10 MB
P03: modemst1         (0000A028, 00000C00)	1536 KB
P04: modemst2         (0000AC28, 00000C00)	1536 KB
P05: persist          (0000B828, 00010000)	32 MB
P06: opporeserve1     (0001B828, 00004000)	8 MB
P07: opporeserve2     (0001F828, 00020000)	64 MB
P08: fsc              (0003F828, 00000002)	1024 b
P09: ssd              (0003F830, 00000010)	8 KB
P10: sbl1             (0003F840, 00000400)	512 KB
P11: rpm              (0003FC40, 00000400)	512 KB
P12: tz               (00040040, 00001000)	2048 KB
P13: devcfg           (00041040, 00000200)	256 KB
P14: sbl1bak          (00041240, 00000400)	512 KB
P15: rpmbak           (00041640, 00000400)	512 KB
P16: tzbak            (00041A40, 00001000)	2048 KB
P17: devcfgbak        (00042A40, 00000200)	256 KB
P18: dsp              (00042C40, 00008000)	16 MB
P19: DDR              (0004C000, 00000040)	32 KB
P20: fsg              (0004C040, 00000C00)	1536 KB
P21: sec              (0004CC40, 00000020)	16 KB
P22: aboot            (0004CC60, 00000800)	1024 KB
P23: abootbak         (0004D460, 00000800)	1024 KB
P24: modem            (0004DC60, 00040000)	128 MB
P25: dtbo             (0008DC60, 00004000)	8 MB
P26: vbmeta           (00091C60, 00000080)	64 KB
P27: boot             (00091CE0, 00020000)	64 MB
P28: recovery         (000B1CE0, 00020000)	64 MB
P29: devinfo          (000D1CE0, 00000800)	1024 KB
P30: splash           (000D4000, 00005800)	11 MB
P31: LOGO             (000D9800, 00010000)	32 MB
P32: DRIVER           (000E9800, 00010000)	32 MB
P33: cache            (000F9800, 00080000)	256 MB
P34: misc             (00179800, 00000800)	1024 KB
P35: keystore         (0017A000, 00000400)	512 KB
P36: config           (0017A400, 00000040)	32 KB
P37: oem              (0017A440, 00000800)	1024 KB
P38: limits           (0017C000, 00000040)	32 KB
P39: mota             (00180000, 00000400)	512 KB
P40: dip              (00180400, 00000800)	1024 KB
P41: mdtp             (00180C00, 00010000)	32 MB
P42: syscfg           (00190C00, 00000400)	512 KB
P43: mcfg             (00191000, 00002000)	4 MB
P44: lksecapp         (00194000, 00000100)	128 KB
P45: cmnlib           (00194100, 00000800)	1024 KB
P46: cmnlib64         (00194900, 00000800)	1024 KB
P47: keymaster        (00195100, 00000800)	1024 KB
P48: lksecappbak      (00195900, 00000100)	128 KB
P49: cmnlibbak        (00195A00, 00000800)	1024 KB
P50: cmnlib64bak      (00196200, 00000800)	1024 KB
P51: keymasterbak     (00196A00, 00000800)	1024 KB
P52: apdp             (00198000, 00000200)	256 KB
P53: msadp            (00198200, 00000200)	256 KB
P54: dpo              (00198400, 00000010)	8 KB
P55: logdump          (00198410, 00020000)	64 MB
P56: vm-kystore       (001B8410, 00000800)	1024 KB
P57: vm-data          (001B8C10, 00005000)	10 MB
P58: hyp              (001C0000, 00004000)	8 MB
P59: vm-system        (001C4000, 00020000)	64 MB
P60: vm-linux         (001E4000, 00010000)	32 MB
P61: system           (001F4000, 007F0000)	4064 MB
P62: vendor           (009E4000, 0020FB00)	1055 MB
P63: userdata         (00BF4000, 06887FDF)	52.27 GB
Backuping modemst1 partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_modemst1_0xa028_0xc00_08_10_2020_19_13_56.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.3; FW: 1.24.
Backuping modemst2 partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_modemst2_0xac28_0xc00_08_10_2020_19_13_56.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.3; FW: 1.24.
Backuping fsg partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_fsg_0x4c040_0xc00_08_10_2020_19_13_56.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.3; FW: 1.24.

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size       : 8f800000 bytes
Device sector size    : 512 bytes
Partition offset      : 2048000
Number of sectors     : 8323072
Build ID              : OPM1.171019.026
Release ID            : 8.1.0
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20191231.163024 release-keys

---------------------------------------------------------------Reset operation finished
 

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

Remove Pattern Lock OPPO A31 CPH2015


p_1829n9wep1.png


p_182974x2i1.jpg
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

انشاء ملف srf لهاتف هواوي trt-l21a

لتصليح البوت عبر لـ usb في وضع 9008

كود:
odel Settings:
Interface : USB
Loading custom loader C:/Users/Mohamed-Gsm/Desktop/TRT-8940.mbn file...
Core      : Custom Loader
Loader    : TRT-8940.mbn

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device       : CoreID_0006B0E1
Core         : Custom Loader
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
P00: GPT              (00000000, 00000022)	17 KB
P01: sbl1             (00000022, 00000400)	512 KB
P02: rpm              (00000422, 00000400)	512 KB
P03: tz               (00000822, 00001000)	2048 KB
P04: devcfg           (00001822, 00000200)	256 KB
P05: sbl1bak          (00001A22, 00000400)	512 KB
P06: rpmbak           (00001E22, 00000400)	512 KB
P07: tzbak            (00002222, 00001000)	2048 KB
P08: devcfgbak        (00003222, 00000200)	256 KB
P09: dsp              (00003422, 00008000)	16 MB
P10: pad0             (0000B422, 00004BDE)	9.483 MB
P11: aboot            (00010000, 00004000)	8 MB
P12: cmnlib           (00014000, 00000200)	256 KB
P13: cmnlib64         (00014200, 00000200)	256 KB
P14: keymaster        (00014400, 00000200)	256 KB
P15: abootbak         (00014600, 00004000)	8 MB
P16: cmnlibbak        (00018600, 00000200)	256 KB
P17: cmnlib64bak      (00018800, 00000200)	256 KB
P18: keymasterbak     (00018A00, 00000200)	256 KB
P19: fsg              (00018C00, 00002000)	4 MB
P20: DDR              (0001AC00, 00000040)	32 KB
P21: sec              (0001AC40, 00000020)	16 KB
P22: devinfo          (0001AC60, 00000800)	1024 KB
P23: limits           (0001B460, 00000040)	32 KB
P24: oeminfo          (00020000, 00020000)	64 MB
P25: misc             (00040000, 00002000)	4 MB
P26: modemst1         (00042000, 00002000)	4 MB
P27: modemst2         (00044000, 00002000)	4 MB
P28: fsc              (00046000, 00000002)	1024 b
P29: ssd              (00046002, 00000010)	8 KB
P30: nff              (00046012, 00004000)	8 MB
P31: splash2          (0004A012, 00004000)	8 MB
P32: pad1             (0004E012, 00001FEE)	4087 KB
P33: modem            (00050000, 00050000)	160 MB
P34: erecovery        (000A0000, 00028000)	80 MB
P35: boot             (000C8000, 00028000)	80 MB
P36: recovery         (000F0000, 00028000)	80 MB
P37: cache            (00120000, 00080000)	256 MB
P38: persist          (001A0000, 00020000)	64 MB
P39: log              (001C0000, 00020000)	64 MB
P40: keystore         (001E0000, 00000400)	512 KB
P41: config           (001E0400, 00000400)	512 KB
P42: mota             (001E0800, 00000400)	512 KB
P43: dip              (001E0C00, 00000800)	1024 KB
P44: mdtp             (001E1400, 00010000)	32 MB
P45: syscfg           (001F1400, 00000400)	512 KB
P46: mcfg             (001F1800, 00002000)	4 MB
P47: lksecapp         (001F3800, 00000100)	128 KB
P48: lksecappbak      (001F3900, 00000100)	128 KB
P49: apdp             (001F3A00, 00000200)	256 KB
P50: msadp            (001F3C00, 00000200)	256 KB
P51: dpo              (001F3E00, 00000010)	8 KB
P52: rrecord          (001F3E10, 00008000)	16 MB
P53: patch            (001FBE10, 00010000)	32 MB
P54: bootfail_info    (0020BE10, 00001000)	2048 KB
P55: pad2             (0020CE10, 000031F0)	6.242 MB
P56: logdump          (00210000, 00020000)	64 MB
P57: version          (00230000, 00010000)	32 MB
P58: vendor           (00240000, 00130000)	608 MB
P59: product          (00370000, 00060000)	192 MB
P60: cust             (003D0000, 00060000)	192 MB
P61: system           (00430000, 004C8000)	2448 MB
P62: userdata         (00900000, 0313DFDF)	24.62 GB
Backuping fsg partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_fsg_0x18c00_0x2000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.8; FW: 1.24.
Backuping oeminfo partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_oeminfo_0x20000_0x20000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:11 
SW: 2.1.8; FW: 1.24.
Backuping modemst1 partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst1_0x42000_0x2000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.8; FW: 1.24.
Backuping modemst2 partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst2_0x44000_0x2000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.8; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 4390912
Number of sectors     : 5013504
Device Manufacturer   : Huawei
Device Platform       : 
Build ID              : NRD90M
Display Build ID      : System 5.1.0.78(10LC)
Release ID            : 7.0
Device Model          : generic_a53_32
Device Name           : generic_a53_32
Architecture ABI      : armeabi-v7a
Architecture ABI2     : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description     : generic_a53_32-user 7.0 NRD90M eng.jenkin.20180727.183802 test-keys

SRF
كود:
Model Settings:
Interface : USB
Loading custom loader C:/Users/Mohamed-Gsm/Desktop/TRT-8940.mbn file...
Core      : Custom Loader
Loader    : TRT-8940.mbn

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device       : CoreID_0006B0E1
Core         : Custom Loader
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
P00: GPT              (00000000, 00000022)	17 KB
P01: sbl1             (00000022, 00000400)	512 KB
P02: rpm              (00000422, 00000400)	512 KB
P03: tz               (00000822, 00001000)	2048 KB
P04: devcfg           (00001822, 00000200)	256 KB
P05: sbl1bak          (00001A22, 00000400)	512 KB
P06: rpmbak           (00001E22, 00000400)	512 KB
P07: tzbak            (00002222, 00001000)	2048 KB
P08: devcfgbak        (00003222, 00000200)	256 KB
P09: dsp              (00003422, 00008000)	16 MB
P10: pad0             (0000B422, 00004BDE)	9.483 MB
P11: aboot            (00010000, 00004000)	8 MB
P12: cmnlib           (00014000, 00000200)	256 KB
P13: cmnlib64         (00014200, 00000200)	256 KB
P14: keymaster        (00014400, 00000200)	256 KB
P15: abootbak         (00014600, 00004000)	8 MB
P16: cmnlibbak        (00018600, 00000200)	256 KB
P17: cmnlib64bak      (00018800, 00000200)	256 KB
P18: keymasterbak     (00018A00, 00000200)	256 KB
P19: fsg              (00018C00, 00002000)	4 MB
P20: DDR              (0001AC00, 00000040)	32 KB
P21: sec              (0001AC40, 00000020)	16 KB
P22: devinfo          (0001AC60, 00000800)	1024 KB
P23: limits           (0001B460, 00000040)	32 KB
P24: oeminfo          (00020000, 00020000)	64 MB
P25: misc             (00040000, 00002000)	4 MB
P26: modemst1         (00042000, 00002000)	4 MB
P27: modemst2         (00044000, 00002000)	4 MB
P28: fsc              (00046000, 00000002)	1024 b
P29: ssd              (00046002, 00000010)	8 KB
P30: nff              (00046012, 00004000)	8 MB
P31: splash2          (0004A012, 00004000)	8 MB
P32: pad1             (0004E012, 00001FEE)	4087 KB
P33: modem            (00050000, 00050000)	160 MB
P34: erecovery        (000A0000, 00028000)	80 MB
P35: boot             (000C8000, 00028000)	80 MB
P36: recovery         (000F0000, 00028000)	80 MB
P37: cache            (00120000, 00080000)	256 MB
P38: persist          (001A0000, 00020000)	64 MB
P39: log              (001C0000, 00020000)	64 MB
P40: keystore         (001E0000, 00000400)	512 KB
P41: config           (001E0400, 00000400)	512 KB
P42: mota             (001E0800, 00000400)	512 KB
P43: dip              (001E0C00, 00000800)	1024 KB
P44: mdtp             (001E1400, 00010000)	32 MB
P45: syscfg           (001F1400, 00000400)	512 KB
P46: mcfg             (001F1800, 00002000)	4 MB
P47: lksecapp         (001F3800, 00000100)	128 KB
P48: lksecappbak      (001F3900, 00000100)	128 KB
P49: apdp             (001F3A00, 00000200)	256 KB
P50: msadp            (001F3C00, 00000200)	256 KB
P51: dpo              (001F3E00, 00000010)	8 KB
P52: rrecord          (001F3E10, 00008000)	16 MB
P53: patch            (001FBE10, 00010000)	32 MB
P54: bootfail_info    (0020BE10, 00001000)	2048 KB
P55: pad2             (0020CE10, 000031F0)	6.242 MB
P56: logdump          (00210000, 00020000)	64 MB
P57: version          (00230000, 00010000)	32 MB
P58: vendor           (00240000, 00130000)	608 MB
P59: product          (00370000, 00060000)	192 MB
P60: cust             (003D0000, 00060000)	192 MB
P61: system           (00430000, 004C8000)	2448 MB
P62: userdata         (00900000, 0313DFDF)	24.62 GB
Backuping fsg partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_fsg_0x18c00_0x2000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.8; FW: 1.24.
Backuping oeminfo partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_oeminfo_0x20000_0x20000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:11 
SW: 2.1.8; FW: 1.24.
Backuping modemst1 partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst1_0x42000_0x2000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.8; FW: 1.24.
Backuping modemst2 partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst2_0x44000_0x2000_21_01_2021_23_06_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.8; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 4390912
Number of sectors     : 5013504
Device Manufacturer   : Huawei
Device Platform       : 
Build ID              : NRD90M
Display Build ID      : System 5.1.0.78(10LC)
Release ID            : 7.0
Device Model          : generic_a53_32
Device Name           : generic_a53_32
Architecture ABI      : armeabi-v7a
Architecture ABI2     : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description     : generic_a53_32-user 7.0 NRD90M eng.jenkin.20180727.183802 test-keys

---------------------------------------------------------------
Added partition GPT to constructor file.
Added partition sbl1 to constructor file.
Added partition rpm to constructor file.
Added partition tz to constructor file.
Added partition devcfg to constructor file.
Added partition sbl1bak to constructor file.
Added partition rpmbak to constructor file.
Added partition tzbak to constructor file.
Added partition devcfgbak to constructor file.
Added partition dsp to constructor file.
Added partition pad0 to constructor file.
Added partition aboot to constructor file.
Added partition cmnlib to constructor file.
Added partition cmnlib64 to constructor file.
Added partition keymaster to constructor file.
Added partition abootbak to constructor file.
Added partition cmnlibbak to constructor file.
Added partition cmnlib64bak to constructor file.
Added partition keymasterbak to constructor file.
Added partition fsg to constructor file.
Added partition DDR to constructor file.
Added partition sec to constructor file.
Added partition devinfo to constructor file.
Added partition limits to constructor file.
Added partition oeminfo to constructor file.
Added partition misc to constructor file.
Added partition modemst1 to constructor file.
Added partition modemst2 to constructor file.
Added partition fsc to constructor file.
Added partition ssd to constructor file.
Added partition nff to constructor file.
Added partition splash2 to constructor file.
Added partition pad1 to constructor file.
Added partition modem to constructor file.
Added partition erecovery to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition cache to constructor file.
Added partition persist to constructor file.
Added partition log to constructor file.
Added partition keystore to constructor file.
Added partition config to constructor file.
Added partition mota to constructor file.
Added partition dip to constructor file.
Added partition mdtp to constructor file.
Added partition syscfg to constructor file.
Added partition mcfg to constructor file.
Added partition lksecapp to constructor file.
Added partition lksecappbak to constructor file.
Added partition apdp to constructor file.
Added partition msadp to constructor file.
Added partition dpo to constructor file.
Added partition rrecord to constructor file.
Added partition patch to constructor file.
Added partition bootfail_info to constructor file.
Added partition pad2 to constructor file.
Added partition logdump to constructor file.
Added partition version to constructor file.
Added partition vendor to constructor file.
Added partition product to constructor file.
Added partition cust to constructor file.
Added partition system to constructor file.
SRF "C:/Users/Mohamed-Gsm/Desktop/Huawei_TRT-L21A.srf" has been installed successfully.
 

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

Remove Pattern Lock OPPO A3S

p_1851vamds1.png


Welcome to Medusa Pro Software version 2.1.9.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID : 90014A484147346132A5C6908068C5AF
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) C6908068
Manufacturing date : 12/2018
---------------------------------------------------------------
CSD Info

CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/HAG4a2_25_01_2021_17_09_25.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 01299FDF) 9.301 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/HAG4a2_modemst1_0xa028_0xc00_25_01_2021_17_09_25.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.9; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/HAG4a2_modemst2_0xac28_0xc00_25_01_2021_17_09_25.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.9; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/HAG4a2_fsg_0x50040_0xc00_25_01_2021_17_09_25.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.9; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID : OPM1.171019.026
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20201010.154803 release-keys

---------------------------------------------------------------
Reset operation finished
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus

Reset Code OPPO A5S Without Losing Data
كود:
Started.
Reader #0: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC GD6BMB
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100474436424D4201D9BA6AA7A681
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : GD6BMB
Product revision      : 0.1
Product serial number : (hex) D9BA6AA7
Manufacturing date    : 10/2019
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x02) 00000010
Boot bus width        : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/GD6BMB_07_02_2021_00_07_34.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 1.24.
P00: GPT              (00000000, 00000040)	32 KB
P01: boot_para        (00000040, 00000800)	1024 KB
P02: recovery         (00000840, 00020000)	64 MB
P03: para             (00020840, 00000400)	512 KB
P04: opporeserve1     (00020C40, 00004000)	8 MB
P05: opporeserve2     (00024C40, 00020000)	64 MB
P06: oppo_custom      (00044C40, 00000800)	1024 KB
P07: expdb            (00045440, 0000A000)	20 MB
P08: frp              (0004F440, 00000800)	1024 KB
P09: nvcfg            (0004FC40, 00010000)	32 MB
P10: nvdata           (0005FC40, 00020000)	64 MB
P11: metadata         (0007FC40, 00010000)	32 MB
P12: protect1         (0008FC40, 00004000)	8 MB
P13: protect2         (00093C40, 000043C0)	8.469 MB
P14: seccfg           (00098000, 00004000)	8 MB
P15: persist          (0009C000, 00018000)	48 MB
P16: sec1             (000B4000, 00001000)	2048 KB
P17: proinfo          (000B5000, 00001800)	3072 KB
P18: md1img           (000B6800, 00032000)	100 MB
P19: spmfw            (000E8800, 00000800)	1024 KB
P20: scp1             (000E9000, 00003000)	6 MB
P21: scp2             (000EC000, 00003000)	6 MB
P22: sspm_1           (000EF000, 00000800)	1024 KB
P23: sspm_2           (000EF800, 00000800)	1024 KB
P24: gz1              (000F0000, 00008000)	16 MB
P25: gz2              (000F8000, 00008000)	16 MB
P26: nvram            (00100000, 00020000)	64 MB
P27: lk               (00120000, 00002800)	5 MB
P28: lk2              (00122800, 00002800)	5 MB
P29: boot             (00125000, 00010000)	32 MB
P30: logo             (00135000, 00008000)	16 MB
P31: odmdtbo          (0013D000, 00008000)	16 MB
P32: tee1             (00145000, 00002800)	5 MB
P33: tee2             (00147800, 00004800)	9 MB
P34: odm              (0014C000, 00080000)	256 MB
P35: vendor           (001CC000, 002A0000)	1344 MB
P36: system           (0046C000, 00868000)	4.203 GB
P37: cache            (00CD4000, 00080000)	256 MB
P38: userdata         (00D54000, 02CCC7DF)	22.4 GB
P39: otp              (03A207DF, 00015800)	43 MB
P40: flashinfo        (03A35FDF, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GD6BMB_nvdata_0x5fc40_0x20000_07_02_2021_00_07_34.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:25 
SW: 2.1.9; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 4636672
Number of sectors     : 8814592
Build ID              : O11019
Release ID            : 8.1.0
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : full_oppo6765_18511-user 8.1.0 O11019 1603200649 release-keys

---------------------------------------------------------------
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC GD6BMB
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100474436424D4201D9BA6AA7A681
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : GD6BMB
Product revision      : 0.1
Product serial number : (hex) D9BA6AA7
Manufacturing date    : 10/2019
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x02) 00000010
Boot bus width        : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/GD6BMB_07_02_2021_00_09_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 1.24.
P00: GPT              (00000000, 00000040)	32 KB
P01: boot_para        (00000040, 00000800)	1024 KB
P02: recovery         (00000840, 00020000)	64 MB
P03: para             (00020840, 00000400)	512 KB
P04: opporeserve1     (00020C40, 00004000)	8 MB
P05: opporeserve2     (00024C40, 00020000)	64 MB
P06: oppo_custom      (00044C40, 00000800)	1024 KB
P07: expdb            (00045440, 0000A000)	20 MB
P08: frp              (0004F440, 00000800)	1024 KB
P09: nvcfg            (0004FC40, 00010000)	32 MB
P10: nvdata           (0005FC40, 00020000)	64 MB
P11: metadata         (0007FC40, 00010000)	32 MB
P12: protect1         (0008FC40, 00004000)	8 MB
P13: protect2         (00093C40, 000043C0)	8.469 MB
P14: seccfg           (00098000, 00004000)	8 MB
P15: persist          (0009C000, 00018000)	48 MB
P16: sec1             (000B4000, 00001000)	2048 KB
P17: proinfo          (000B5000, 00001800)	3072 KB
P18: md1img           (000B6800, 00032000)	100 MB
P19: spmfw            (000E8800, 00000800)	1024 KB
P20: scp1             (000E9000, 00003000)	6 MB
P21: scp2             (000EC000, 00003000)	6 MB
P22: sspm_1           (000EF000, 00000800)	1024 KB
P23: sspm_2           (000EF800, 00000800)	1024 KB
P24: gz1              (000F0000, 00008000)	16 MB
P25: gz2              (000F8000, 00008000)	16 MB
P26: nvram            (00100000, 00020000)	64 MB
P27: lk               (00120000, 00002800)	5 MB
P28: lk2              (00122800, 00002800)	5 MB
P29: boot             (00125000, 00010000)	32 MB
P30: logo             (00135000, 00008000)	16 MB
P31: odmdtbo          (0013D000, 00008000)	16 MB
P32: tee1             (00145000, 00002800)	5 MB
P33: tee2             (00147800, 00004800)	9 MB
P34: odm              (0014C000, 00080000)	256 MB
P35: vendor           (001CC000, 002A0000)	1344 MB
P36: system           (0046C000, 00868000)	4.203 GB
P37: cache            (00CD4000, 00080000)	256 MB
P38: userdata         (00D54000, 02CCC7DF)	22.4 GB
P39: otp              (03A207DF, 00015800)	43 MB
P40: flashinfo        (03A35FDF, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GD6BMB_nvdata_0x5fc40_0x20000_07_02_2021_00_09_13.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:25 
SW: 2.1.9; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 4636672
Number of sectors     : 8814592
Build ID              : O11019
Release ID            : 8.1.0
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : full_oppo6765_18511-user 8.1.0 O11019 1603200649 release-keys

---------------------------------------------------------------

ERROR[012]: Write error.

Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC GD6BMB
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100474436424D4201D9BA6AA7A681
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : GD6BMB
Product revision      : 0.1
Product serial number : (hex) D9BA6AA7
Manufacturing date    : 10/2019
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x02) 00000010
Boot bus width        : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/GD6BMB_07_02_2021_00_10_02.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 1.24.
P00: GPT              (00000000, 00000040)	32 KB
P01: boot_para        (00000040, 00000800)	1024 KB
P02: recovery         (00000840, 00020000)	64 MB
P03: para             (00020840, 00000400)	512 KB
P04: opporeserve1     (00020C40, 00004000)	8 MB
P05: opporeserve2     (00024C40, 00020000)	64 MB
P06: oppo_custom      (00044C40, 00000800)	1024 KB
P07: expdb            (00045440, 0000A000)	20 MB
P08: frp              (0004F440, 00000800)	1024 KB
P09: nvcfg            (0004FC40, 00010000)	32 MB
P10: nvdata           (0005FC40, 00020000)	64 MB
P11: metadata         (0007FC40, 00010000)	32 MB
P12: protect1         (0008FC40, 00004000)	8 MB
P13: protect2         (00093C40, 000043C0)	8.469 MB
P14: seccfg           (00098000, 00004000)	8 MB
P15: persist          (0009C000, 00018000)	48 MB
P16: sec1             (000B4000, 00001000)	2048 KB
P17: proinfo          (000B5000, 00001800)	3072 KB
P18: md1img           (000B6800, 00032000)	100 MB
P19: spmfw            (000E8800, 00000800)	1024 KB
P20: scp1             (000E9000, 00003000)	6 MB
P21: scp2             (000EC000, 00003000)	6 MB
P22: sspm_1           (000EF000, 00000800)	1024 KB
P23: sspm_2           (000EF800, 00000800)	1024 KB
P24: gz1              (000F0000, 00008000)	16 MB
P25: gz2              (000F8000, 00008000)	16 MB
P26: nvram            (00100000, 00020000)	64 MB
P27: lk               (00120000, 00002800)	5 MB
P28: lk2              (00122800, 00002800)	5 MB
P29: boot             (00125000, 00010000)	32 MB
P30: logo             (00135000, 00008000)	16 MB
P31: odmdtbo          (0013D000, 00008000)	16 MB
P32: tee1             (00145000, 00002800)	5 MB
P33: tee2             (00147800, 00004800)	9 MB
P34: odm              (0014C000, 00080000)	256 MB
P35: vendor           (001CC000, 002A0000)	1344 MB
P36: system           (0046C000, 00868000)	4.203 GB
P37: cache            (00CD4000, 00080000)	256 MB
P38: userdata         (00D54000, 02CCC7DF)	22.4 GB
P39: otp              (03A207DF, 00015800)	43 MB
P40: flashinfo        (03A35FDF, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GD6BMB_nvdata_0x5fc40_0x20000_07_02_2021_00_10_02.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:25 
SW: 2.1.9; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 4636672
Number of sectors     : 8814592
Build ID              : O11019
Release ID            : 8.1.0
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : full_oppo6765_18511-user 8.1.0 O11019 1603200649 release-keys

---------------------------------------------------------------
Reset operation finished
Backuping FRP data... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x4f440_0x800_07_02_2021_00_10_47.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 2.1.9; FW: 1.24.
Removing FRP. Please wait... Done.
SW: 2.1.9; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC GD6BMB
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100474436424D4201D9BA6AA7A681
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : GD6BMB
Product revision      : 0.1
Product serial number : (hex) D9BA6AA7
Manufacturing date    : 10/2019
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x02) 00000010
Boot bus width        : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/GD6BMB_07_02_2021_00_11_01.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 1.24.
P00: GPT              (00000000, 00000040)	32 KB
P01: boot_para        (00000040, 00000800)	1024 KB
P02: recovery         (00000840, 00020000)	64 MB
P03: para             (00020840, 00000400)	512 KB
P04: opporeserve1     (00020C40, 00004000)	8 MB
P05: opporeserve2     (00024C40, 00020000)	64 MB
P06: oppo_custom      (00044C40, 00000800)	1024 KB
P07: expdb            (00045440, 0000A000)	20 MB
P08: frp              (0004F440, 00000800)	1024 KB
P09: nvcfg            (0004FC40, 00010000)	32 MB
P10: nvdata           (0005FC40, 00020000)	64 MB
P11: metadata         (0007FC40, 00010000)	32 MB
P12: protect1         (0008FC40, 00004000)	8 MB
P13: protect2         (00093C40, 000043C0)	8.469 MB
P14: seccfg           (00098000, 00004000)	8 MB
P15: persist          (0009C000, 00018000)	48 MB
P16: sec1             (000B4000, 00001000)	2048 KB
P17: proinfo          (000B5000, 00001800)	3072 KB
P18: md1img           (000B6800, 00032000)	100 MB
P19: spmfw            (000E8800, 00000800)	1024 KB
P20: scp1             (000E9000, 00003000)	6 MB
P21: scp2             (000EC000, 00003000)	6 MB
P22: sspm_1           (000EF000, 00000800)	1024 KB
P23: sspm_2           (000EF800, 00000800)	1024 KB
P24: gz1              (000F0000, 00008000)	16 MB
P25: gz2              (000F8000, 00008000)	16 MB
P26: nvram            (00100000, 00020000)	64 MB
P27: lk               (00120000, 00002800)	5 MB
P28: lk2              (00122800, 00002800)	5 MB
P29: boot             (00125000, 00010000)	32 MB
P30: logo             (00135000, 00008000)	16 MB
P31: odmdtbo          (0013D000, 00008000)	16 MB
P32: tee1             (00145000, 00002800)	5 MB
P33: tee2             (00147800, 00004800)	9 MB
P34: odm              (0014C000, 00080000)	256 MB
P35: vendor           (001CC000, 002A0000)	1344 MB
P36: system           (0046C000, 00868000)	4.203 GB
P37: cache            (00CD4000, 00080000)	256 MB
P38: userdata         (00D54000, 02CCC7DF)	22.4 GB
P39: otp              (03A207DF, 00015800)	43 MB
P40: flashinfo        (03A35FDF, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GD6BMB_nvdata_0x5fc40_0x20000_07_02_2021_00_11_01.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:25 
SW: 2.1.9; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 4636672
Number of sectors     : 8814592
Build ID              : O11019
Release ID            : 8.1.0
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : full_oppo6765_18511-user 8.1.0 O11019 1603200649 release-keys

---------------------------------------------------------------

ERROR[012]: Write error.

Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC GD6BMB
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100474436424D4201D9BA6AA7A681
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : GD6BMB
Product revision      : 0.1
Product serial number : (hex) D9BA6AA7
Manufacturing date    : 10/2019
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x02) 00000010
Boot bus width        : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/GD6BMB_07_02_2021_00_12_02.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 1.24.
P00: GPT              (00000000, 00000040)	32 KB
P01: boot_para        (00000040, 00000800)	1024 KB
P02: recovery         (00000840, 00020000)	64 MB
P03: para             (00020840, 00000400)	512 KB
P04: opporeserve1     (00020C40, 00004000)	8 MB
P05: opporeserve2     (00024C40, 00020000)	64 MB
P06: oppo_custom      (00044C40, 00000800)	1024 KB
P07: expdb            (00045440, 0000A000)	20 MB
P08: frp              (0004F440, 00000800)	1024 KB
P09: nvcfg            (0004FC40, 00010000)	32 MB
P10: nvdata           (0005FC40, 00020000)	64 MB
P11: metadata         (0007FC40, 00010000)	32 MB
P12: protect1         (0008FC40, 00004000)	8 MB
P13: protect2         (00093C40, 000043C0)	8.469 MB
P14: seccfg           (00098000, 00004000)	8 MB
P15: persist          (0009C000, 00018000)	48 MB
P16: sec1             (000B4000, 00001000)	2048 KB
P17: proinfo          (000B5000, 00001800)	3072 KB
P18: md1img           (000B6800, 00032000)	100 MB
P19: spmfw            (000E8800, 00000800)	1024 KB
P20: scp1             (000E9000, 00003000)	6 MB
P21: scp2             (000EC000, 00003000)	6 MB
P22: sspm_1           (000EF000, 00000800)	1024 KB
P23: sspm_2           (000EF800, 00000800)	1024 KB
P24: gz1              (000F0000, 00008000)	16 MB
P25: gz2              (000F8000, 00008000)	16 MB
P26: nvram            (00100000, 00020000)	64 MB
P27: lk               (00120000, 00002800)	5 MB
P28: lk2              (00122800, 00002800)	5 MB
P29: boot             (00125000, 00010000)	32 MB
P30: logo             (00135000, 00008000)	16 MB
P31: odmdtbo          (0013D000, 00008000)	16 MB
P32: tee1             (00145000, 00002800)	5 MB
P33: tee2             (00147800, 00004800)	9 MB
P34: odm              (0014C000, 00080000)	256 MB
P35: vendor           (001CC000, 002A0000)	1344 MB
P36: system           (0046C000, 00868000)	4.203 GB
P37: cache            (00CD4000, 00080000)	256 MB
P38: userdata         (00D54000, 02CCC7DF)	22.4 GB
P39: otp              (03A207DF, 00015800)	43 MB
P40: flashinfo        (03A35FDF, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GD6BMB_nvdata_0x5fc40_0x20000_07_02_2021_00_12_02.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:25 
SW: 2.1.9; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 4636672
Number of sectors     : 8814592
Build ID              : O11019
Release ID            : 8.1.0
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : full_oppo6765_18511-user 8.1.0 O11019 1603200649 release-keys

---------------------------------------------------------------
Reset operation finished
 
أعلى