himihicham
عضو أساسي
السلام عليكم ورحمة الله وبركاته
بعد بحث وبالصدفة وجدت موضوعا في غاية الاهمية في منتدى gsmhosting
فقلت اضعه في منتدانا العزيز ليستفيذ منه الجميع وهو اصلاح ****band و IMEI لبعض اجهزة
وللعلم فان هذه الملفات ليست مجانية وهي في موقع سبورت http://asanfile.com/file/index/13237?****=efs%20file ولكن الاخ العزيز في الموضوع وضعها لنا وللجميع بالمجان للذلك انصح الجميع
ولمن لديهم الريف ان يرفعوا جميع الملفات والاحتفاظ بها في اجهزتهم قد يحتاجونها مستقبلا
ولكم الشرح الكامل طريقة اصلاح كل جهاز
SGH-I9100 Samsung Galaxy SII
الحل الاول
1-Select "Speed"
2-Select "I9100" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "I9100_EFS.bin" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
الحل الثاني
كتابة ملف efs بالدامب
Write efs From Dump file
1-Select "Speed"
2-Select "I9100" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "Dump File" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
SGH-N7000 Galaxy Note
1
-Select "Speed"
2-Select "N7000" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "N7000_EFS.bin" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write
2
1-Select "Speed"
2-Select "N7000" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "Dump File" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
SGH-I9003 Galaxy SL
1 Plugin
1-Open "Full Dump File" in "Source Image File ****" ******
2-Press "Make Partition From File"
3-Double click On Partition 3...."This is EFS Partition"
4-Press "Flash Selected"
2 Dcc Read/Write Page
1-Select "Speed"
2-Select "I9003" Model...."if you get some error,Please select Iram.dll version"
3-Set "Start Address" "Data Length"
4-Uncheck 3 option...Select "Rom1"
5-Open "Full Dump file" in "Main" ******6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
Samsung SGH-S5660 Galaxy Gio (Imei Repair Via Riff-Box)
1 Please Open "Qualcomm Plugin"
1-Open "Full Dump File" in "Source Image File ****" ******
2-Press "Make Partition From File"
3-Double click On Partition 3...."This is EFS Partition"
4-Press "Flash Selected"
*:for some case you need write "EFS2" partition too
After This manuall,You Shulde See Correct Imei(35xxxxx)..Not Default imei(0044xxxx)
Samsung SGH-I9001
1 Open eMMC Plugin....:
-Open I9001 Dump file...(128mb,256mb.512mb.1GB,2GB...Can use)
2-Select "Assign ****s for xxx ...1nd-Gen I9001"
3-Load Image From File
4-Double Click On Partition 5...(P49_AMSS)
5-Press "Flash Selected"
2 By eMMC Plugin Without Dump File
1-Press "Load Image From Device"
2-Select "Assign **** for xxxxxx 1nd-Gen I9001"
3-Double Click on Partition 5 (P49_AMSS)
4-Right Click on and Select "Inject Data From File into "P49_AMSS" Partition"
5-Browse and open "000007800000_P49_AMSS.bin"
6-Press "Flash Selected"
Download "000007800000_P49_AMSS" From Here:
000007800000_P49_AMSS.rar (7,41 MB) - uploaded.to
Samsung Galaxy S I9000:
1
1-Select "Speed"
2-Select "I9000" Model
3-Set "Start Address" "Data Length"
4-Uncheck 3 option...Select "Rom1"
5-Open "Full Dump file" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
2
1-Select "Speed"
2-Select "I9000" Model
3-Set "Start Address" "Data Length"
4-Uncheck 3 option...Select "Rom1"
5-Open "I9000_EFS.bin" in "Spare" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
3 Please Open "Samsung I9000-Like Full Flash Image Files " in "Useful Plugin Tab"
1-Open "Full Dump File" in "Source Image File ****" ******
2-Press "Make Partition From File"
3-Double click On Partition 3...."This is EFS Partition"
4-Press "Flash Selected
Samsung Galaxy Advance I9070
1 I9070 Need Write 2 Partition For Repair Imei And ****Band:
Partition 5 EFS
Partition 6 Modem_FS
----------------
Here is Tutorial:
1-Open eMMC Plugin
2-Click "Load Layout From Device"
--------------------
3-Right Click on Partition 5 and Select "Injeckt Data From File"
4-Select "I9070_EFS.bin
--------------------
5-Then,Right Click on Partition 6 and Select "I9070_Modem_FS.bin"
--------------------
6-Select Both Partition By Double Clicking
--------------------
7-Press "Write Selected"
------------------------------------------------------------
After Write,Check Phone For Imei And ****Band...Some Device Needed Flash Firmware and Make 2 Wipe From CWM or Stock Recovery(3e)
Galaxy Tab 7....."SPH-P100 Sprint"
Select P1000.dll in Model List
1-Goto "DCC Read/Write Page "
2-Select " SPH-P100_EFS.bin" in "Main" ******
3-Set Address
4-Select "Image File is Used...."
4-Press "Write"
ناتي الان الى تحميل الملفات
Download "000007800000_P49_AMSS" From Here:
http://uploaded.net/file/o4klza24
All File
https://hotfile.com/dl/203538751/b3dab01/RIFF_EFS.rar.html
I997R_Infuse_Rogers_EFS.
https://hotfile.com/dl/204394287/e756f26/I997R_Infuse_Rogers_EFS.rar.html
ارجوا ان يستفيذ منه الجميع والشكر لصاحب الموضوع
تحياتي اخوكم هشام
بعد بحث وبالصدفة وجدت موضوعا في غاية الاهمية في منتدى gsmhosting
فقلت اضعه في منتدانا العزيز ليستفيذ منه الجميع وهو اصلاح ****band و IMEI لبعض اجهزة
وللعلم فان هذه الملفات ليست مجانية وهي في موقع سبورت http://asanfile.com/file/index/13237?****=efs%20file ولكن الاخ العزيز في الموضوع وضعها لنا وللجميع بالمجان للذلك انصح الجميع
ولمن لديهم الريف ان يرفعوا جميع الملفات والاحتفاظ بها في اجهزتهم قد يحتاجونها مستقبلا
ولكم الشرح الكامل طريقة اصلاح كل جهاز
SGH-I9100 Samsung Galaxy SII
الحل الاول
1-Select "Speed"
2-Select "I9100" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "I9100_EFS.bin" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
الحل الثاني
كتابة ملف efs بالدامب
Write efs From Dump file
1-Select "Speed"
2-Select "I9100" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "Dump File" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
SGH-N7000 Galaxy Note
1
-Select "Speed"
2-Select "N7000" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "N7000_EFS.bin" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write
2
1-Select "Speed"
2-Select "N7000" Model
3-Set "Start Address" "Data Length"
Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"
4-Uncheck 3 option...Select "Rom1"
5-Open "Dump File" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
SGH-I9003 Galaxy SL
1 Plugin
1-Open "Full Dump File" in "Source Image File ****" ******
2-Press "Make Partition From File"
3-Double click On Partition 3...."This is EFS Partition"
4-Press "Flash Selected"
2 Dcc Read/Write Page
1-Select "Speed"
2-Select "I9003" Model...."if you get some error,Please select Iram.dll version"
3-Set "Start Address" "Data Length"
4-Uncheck 3 option...Select "Rom1"
5-Open "Full Dump file" in "Main" ******6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
Samsung SGH-S5660 Galaxy Gio (Imei Repair Via Riff-Box)
1 Please Open "Qualcomm Plugin"
1-Open "Full Dump File" in "Source Image File ****" ******
2-Press "Make Partition From File"
3-Double click On Partition 3...."This is EFS Partition"
4-Press "Flash Selected"
*:for some case you need write "EFS2" partition too
After This manuall,You Shulde See Correct Imei(35xxxxx)..Not Default imei(0044xxxx)
Samsung SGH-I9001
1 Open eMMC Plugin....:
-Open I9001 Dump file...(128mb,256mb.512mb.1GB,2GB...Can use)
2-Select "Assign ****s for xxx ...1nd-Gen I9001"
3-Load Image From File
4-Double Click On Partition 5...(P49_AMSS)
5-Press "Flash Selected"
2 By eMMC Plugin Without Dump File
1-Press "Load Image From Device"
2-Select "Assign **** for xxxxxx 1nd-Gen I9001"
3-Double Click on Partition 5 (P49_AMSS)
4-Right Click on and Select "Inject Data From File into "P49_AMSS" Partition"
5-Browse and open "000007800000_P49_AMSS.bin"
6-Press "Flash Selected"
Download "000007800000_P49_AMSS" From Here:
000007800000_P49_AMSS.rar (7,41 MB) - uploaded.to
Samsung Galaxy S I9000:
1
1-Select "Speed"
2-Select "I9000" Model
3-Set "Start Address" "Data Length"
4-Uncheck 3 option...Select "Rom1"
5-Open "Full Dump file" in "Main" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
2
1-Select "Speed"
2-Select "I9000" Model
3-Set "Start Address" "Data Length"
4-Uncheck 3 option...Select "Rom1"
5-Open "I9000_EFS.bin" in "Spare" ******
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"
3 Please Open "Samsung I9000-Like Full Flash Image Files " in "Useful Plugin Tab"
1-Open "Full Dump File" in "Source Image File ****" ******
2-Press "Make Partition From File"
3-Double click On Partition 3...."This is EFS Partition"
4-Press "Flash Selected
Samsung Galaxy Advance I9070
1 I9070 Need Write 2 Partition For Repair Imei And ****Band:
Partition 5 EFS
Partition 6 Modem_FS
----------------
Here is Tutorial:
1-Open eMMC Plugin
2-Click "Load Layout From Device"
--------------------
3-Right Click on Partition 5 and Select "Injeckt Data From File"
4-Select "I9070_EFS.bin
--------------------
5-Then,Right Click on Partition 6 and Select "I9070_Modem_FS.bin"
--------------------
6-Select Both Partition By Double Clicking
--------------------
7-Press "Write Selected"
------------------------------------------------------------
After Write,Check Phone For Imei And ****Band...Some Device Needed Flash Firmware and Make 2 Wipe From CWM or Stock Recovery(3e)
Galaxy Tab 7....."SPH-P100 Sprint"
Select P1000.dll in Model List
1-Goto "DCC Read/Write Page "
2-Select " SPH-P100_EFS.bin" in "Main" ******
3-Set Address
4-Select "Image File is Used...."
4-Press "Write"
ناتي الان الى تحميل الملفات
Download "000007800000_P49_AMSS" From Here:
http://uploaded.net/file/o4klza24
All File
https://hotfile.com/dl/203538751/b3dab01/RIFF_EFS.rar.html
I997R_Infuse_Rogers_EFS.
https://hotfile.com/dl/204394287/e756f26/I997R_Infuse_Rogers_EFS.rar.html
ارجوا ان يستفيذ منه الجميع والشكر لصاحب الموضوع
تحياتي اخوكم هشام
