تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

تابع تصليح ايمي Condor TGW801L

 [B]Selected connection metod: Flash Connection
 Exe version: NCKBox AndroidMTK 2.8
 Selected phone: ELBRUS
 Action : [COLOR="#FF0000"]IMEI REPAIR[/COLOR].
[COLOR="#FF0000"] IMEI[1] for write : 3597XXXXXXXXX37
 IMEI[2] for write : 359XXXXXXXXXX32[/COLOR]
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100385750443352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [helio]Reset privacy, wait.
 Dumping data, wait.
 Reading imei
 IMEI[1]: 359793070098758
 IMEI[2]: 359793075098753
 Backup saved: C:\ProgramData\Android_MTK_Backup_Folder\nvram_backup\FLASH_MODE_NVRAM_MT6735M_359793070098758_359793075098753_06_16_2020_11_52_42.zip
 Writing imei
[COLOR="#FF0000"] IMEI[1] TO UPDATE: 3597XXXXXXXXX37
 IMEI[2] TO UPDATE: 359XXXXXXXXXX32[/COLOR]
 Generic IMEI OK
 Wait untill phone will start charging.
 [0]All done[/B].

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

STREAM HT28 Reset FRP

 [B]Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.8
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463732324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [system]Reading info, wait...
 Build ID: O11019
 Display ID: HB45B2Plus.DZ.V10.0.0.2018.11.22
 Version: 8.1.0
 Model: HT28
 Brand: STREAM
 Device: B2Plus
 Manufacturer: EastAeon
[COLOR="#FF0000"] This phone have FRP partition.[/COLOR]
 IMEI[1]: 352XXXXXXXXXX28
 IMEI[2]: 352XXXXXXXXXX36
 Wait untill phone will start charging.
 [0]All done.[/B]

 [B]Exe version: NCKBox AndroidMTK 2.8
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463732324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Checking data, wait...
 
 Writing FRP, wait...
[COLOR="#FF0000"] FRP Reset Done.[/COLOR]
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

IRIS IS3Plus Reset FRP

Info

 [B]Action : [COLOR="#FF0000"]Boot Info[/COLOR].
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.8
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) KSI 0x454838434538 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 700100454838434538 : 00000000000000
 EMMC UA SIZE: 0x1c8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1c8c00000      [7.137 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [system]Reading info, wait...
 Build ID: O11019
 Display ID: IS3Plus20190108V1.0
 Version: 8.1.0
 Build Date: Fri Dec  7 11:28:11 CST 2018
 Model: [COLOR="#FF0000"]IS3Plus[/COLOR]
 Brand: [COLOR="#FF0000"]IRIS[/COLOR]
 Device: [COLOR="#FF0000"]IS3Plus[/COLOR]
 Manufacturer: [COLOR="#FF0000"]IRIS[/COLOR]
[COLOR="#FF0000"] This phone have FRP partition.[/COLOR]
 IMEI[1]: 354XXXXXXXXXX04
 IMEI[2]: 354XXXXXXXXXX12
 Wait untill phone will start charging.
 [0]All done.[/B]

 [B]Exe version: NCKBox AndroidMTK 2.8
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: [COLOR="#FF0000"]Reset FRP[/COLOR]
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) KSI 0x454838434538 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 700100454838434538 : 00000000000000
 EMMC UA SIZE: 0x1c8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1c8c00000      [7.137 GB]
 Checking data, wait...
 
 Writing FRP, wait...
[COLOR="#FF0000"] FRP Reset Done.[/COLOR]
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor P7 PGN514 Reset To Factory

 [B]Action : [COLOR="#FF0000"]Boot Info[/COLOR].
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.8
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x513832534d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100513832534D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [system]Reading info, wait...
 Build ID: LRX21M
 Version: 5.0
 Build Date: Tue Oct 27 22:41:30 CST 2015
 Region: FR
 Display ID: PGN514
 Model: PGN514
 Brand: condor
 Device: PGN514
 Manufacturer: condor
 Mediatek Version Release: GBL7321AC_0301_T5268
 This phone have FRP partition.
 IMEI[1]: 353XXXXXXXXXX81
 IMEI[2]: 353XXXXXXXXXX87
 Wait untill phone will start charging.
 [0]All done.[/B]

[B] [MISC][COLOR="#FF0000"]Action: Reset To Factory[/COLOR].
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.8
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x513832534d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100513832534D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 Resetting userdata.
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor Griffe T2 Erase FRP

[B]EXE: NckBox Spreadtrum Module 1.2
SELECTED: SC9832A_EMMC
[0]ACTION: [COLOR="#FF0000"]Boot Info[/COLOR]
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: SPA Condor Electronics
Hardware: SP9832A-2_V1.1.0(4M)
Platform: sc8830
Board: zsl866_an
Build Id: NRD90M
Model: [COLOR="#FF0000"]Griffe T2[/COLOR]
Android Release: 7.0
Android Version: NRD90M release-keys
Security patch: 2017-05-05
Bootloader can be unlocked: 1
[COLOR="#FF0000"]This phone have frp partition.[/COLOR]
Reading l_fixnv1
IMEI 1: 359XXXXXXXXX49
IMEI 2: 359XXXXXXXXX52
Simlock Type: 0
Total Time: 00:00:09
Done.[/B]

[B]EXE: NckBox Spreadtrum Module 1.2
SELECTED: SC9832A_EMMC
ACTION: [COLOR="#FF0000"]Erase FRP[/COLOR]
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: SPA Condor Electronics
Hardware: SP9832A-2_V1.1.0(4M)
Platform: sc8830
Board: zsl866_an
Build Id: NRD90M
Model: [COLOR="#FF0000"]Griffe T2[/COLOR]
Android Release: 7.0
Android Version: NRD90M release-keys
Security patch: 2017-05-05
Bootloader can be unlocked: 1
This phone have frp partition.
Removing frp, wait...
[COLOR="#FF0000"]Format OK.[/COLOR]
Total Time: 00:00:10
Done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor P6 Plus PGN522 Reset To Factory + Reset FRP

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor P6 Plus PGN522 Reset To Factory + Reset FRP

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor L1 SP-622 Flash Firmware Done

 [B]Flash files count is :14
 Action : [COLOR="#FF0000"]Firmware update[/COLOR].
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKBox AndroidMTK 2.8
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :[COLOR="#FF0000"]MT6737M[/COLOR]
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A333643 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 Backup preloader saved in firmware directory.
 Warning, flashing preloader disabled! 
 If you change android version, preloader must be flashed.
 [COLOR="#FF0000"]Starting flash.
 Wait untill phone will start charging.
 [0]All done.[/COLOR][/B]

 

[NoriDz]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

flash redmi mi a2 lite bricked

\par Operation: Upgrade
\par Searching for phone.....
\par Qualcomm HS-USB QDLoader 9008 (COM72) detected.
\par Hello received.
\par HW ID: 00000000E1600400 MSM8953
\par PK HASH: 57158EAF1814D78FD2B3105ECE4DB18A817A08AC664A5782A925F3FF8403D39A
\par Using custom loader: prog_emmc_firehose_8953_ddr.mbn
\par Arhitecture:32 bits
\par [32]Sending loader, please wait.. 
\par Waiting for loader to start...
\par [0] Send NOP ok, loader start.
\par CPU: MSM8953
\par MaxPayloadSizeFromTargetInBytes: 4096
\par MaxPayloadSizeToTargetInBytes: 8192
\par Reading partition info, wait.
\par Volume[0] Size: 58,24 GB  Partitions count: 60
\par [0661BFDF]Userdata Size: 51,05 GB
\par [0]Writing: sec Start: 82 length: 1
\par [0]Writing: lksecapp Start: 506 length: 113
\par [0]Writing: lksecappbak Start: 762 length: 113
\par [0]Writing: devcfg_a Start: 1018 length: 79
\par [0]Writing: devcfg_b Start: 1530 length: 79
\par [0]Writing: apdp Start: 2042 length: 16
\par [0]Writing: msadp Start: 2554 length: 16
\par [0]Writing: sbl1_a Start: 3066 length: 785
\par [0]Writing: sbl1_b Start: 4090 length: 785
\par [0]Writing: rpm_a Start: 5114 length: 341
\par [0]Writing: rpm_b Start: 6138 length: 341
\par [0]Writing: cmnlib_a Start: 10234 length: 402
\par [0]Writing: cmnlib_b Start: 12282 length: 402
\par [0]Writing: cmnlib64_a Start: 14330 length: 518
\par [0]Writing: cmnlib64_b Start: 16378 length: 518
\par [0]Writing: keymaster_a Start: 18426 length: 531
\par [0]Writing: keymaster_b Start: 20474 length: 531
\par [0]Writing: misc Start: 22522 length: 16
\par [0]Writing: aboot_a Start: 24570 length: 1347
\par [0]Writing: aboot_b Start: 26618 length: 1347
\par [0]Writing: tz_a Start: 32762 length: 2992
\par [0]Writing: tz_b Start: 36858 length: 2992
\par [0]Writing: splash Start: 131066 length: 2922
\par [0]Writing: dsp_a Start: 163834 length: 32768
\par [0]Writing: dsp_b Start: 196602 length: 32768
\par [0]Writing: mdtp_a Start: 262138 length: 34782
\par [0]Writing: mdtp_b Start: 327674 length: 34782
\par [0]Writing: boot_a Start: 524288 length: 58135
\par [0]Writing: boot_b Start: 655360 length: 58135
\par [0]Writing: modem_a Start: 917504 length: 262144
\par [0]Writing: modem_b Start: 1179648 length: 262144
\par [0]Sparse writing: system_a  Total chunks: 51 BlockSize: 4096 Sector Size: 512
\par [0]Sparse writing: system_b  Total chunks: 51 BlockSize: 4096 Sector Size: 512
\par [0]Sparse writing: vendor_a  Total chunks: 21 BlockSize: 4096 Sector Size: 512
\par [0]Sparse writing: vendor_b  Total chunks: 21 BlockSize: 4096 Sector Size: 512
\par [0]Sparse writing: userdata  Total chunks: 20 BlockSize: 4096 Sector Size: 512
\par [FLASH][SKIP] name: PrimaryGPT
\par [FLASH][SKIP] name: BackupGPT
\par Applying patch, wait...
\par Restarting phone.....

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

G-TiDE E75 Flash Done

الفلاشة المستعملة
https://www.dzgsm.com/vb/threads/36325-scatter-g-tide-e75-mt6572/

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight M203 Read PhonePassword

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight My Star X Flash Done

[B] Flash files count is :13
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKBox AndroidMTK 2.8
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (115Gb+8192Mb) UNKNOWN_EMMC_DEVICE 
 EMMC FW VERSION: 24:00:00:00:00:00:00:00
 EMMC CID: 880103443944313647 : 00000000000000
 EMMC UA SIZE: 0x39d000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x39dc00000      [14.465 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 Backup preloader saved in firmware directory.
 Warning, flashing preloader disabled! 
 If you change android version, preloader must be flashed.
 Starting flash.
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

CONDOR GRIFFE T9 SP648 Factory Reset - Wipe Phone

Enter Diag

Read Phone Info

Factory Reset - Wipe Phone

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Samsung B310E Flash Done

[B]EXE: NckBox Spreadtrum Module 1.2
SELECTED: [COLOR="#FF0000"]SC6530[/COLOR]
ACTION: [COLOR="#FF0000"]Restore FullFlash[/COLOR].
Writing: C:\Users\Ahmed-GsM\Desktop\B310E DZGSM\SPD6530_SPD6500_00800000_MOCOR_W13.09_FP_R5.0.2_Debug_sc6500_samsung_PitonDS_MEA_JP_05132015163622_1__1-1.bin
Reading Partition info...
Detecting Firmware configuration...
Flash Size: $800000 Sector Size: $10000
Nvram Start: $680000 Nvram Size: $C000
UMEM Start: $4A0000 UMEM Size: $750000
EFS Start: $690000 EFS Size: $170000
PROD_INFO: $68C000
Plain Backup Detected.
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6530
FlashId: GigaDevice: [0x800000]GD25LQ64B
Start Writing...
Total Time: 00:02:41
[COLOR="#FF0000"]Done[/COLOR].[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Tab Condor CTAB785R16-3G Reset To Factory
Stock On Logo

[B] [MISC]Action: [COLOR="#FF0000"]Reset To Factory[/COLOR].
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.8
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: [COLOR="#FF0000"]6583 [/COLOR]1 ca01
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :[COLOR="#FF0000"]MT6589[/COLOR]
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x41574d423352 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 15010041574D423352 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 Resetting userdata.
 Wait untill phone will start charging.
 [0][COLOR="#FF0000"]All done[/COLOR].[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Samsung B310E Read Password

[B]ACTION: [COLOR="#FF0000"]Read Password[/COLOR]
SELECTED: [COLOR="#FF0000"]SC6530[/COLOR]
EXE: NckBox Spreadtrum Module 1.2
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: [COLOR="#FF0000"]6530[/COLOR]
FlashId: GigaDevice: [0x800000]GD25LQ64B
Reading Flash Info, wait...
Flash Size: $800000 Sector Size: $10000
IMEI 1: 35XXXXXXXXXXX80
IMEI 2: 35XXXXXXXXXXX88
[COLOR="#FF0000"][36C]Password: 101980  Active[/COLOR]
[36D]Password: 1234 
[257]Password: 1234 
Total Time: 00:00:08
[COLOR="#FF0000"]Done[/COLOR].[/B]

 

[فيصل16]

Samsung SM-B310E Read Phone Password

Samsung SM-B310E Read Phone Password

​

 

[فيصل16]

Starlight STAR MINI FRP Reset

Starlight STAR MINI FRP Reset

​

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor P6 Pro LTE Reset FRP

[B] Exe version: NCKBox AndroidMTK 2.8
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM62)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737T
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42 
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 150100514536334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight M09 Read PhonePassword

[B]EXE: NckBox Spreadtrum Module 1.2
SELECTED: [COLOR="#FF0000"]SC6531E[/COLOR]
ACTION: [COLOR="#FF0000"]Read PhonePassword[/COLOR]
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.2
Changing bautrate OK.
Send Second Loader.
Flash ID: [EF4016] WINBOND: [0x400000]W25Q32FV size: 0x400000
SN: 98486510302101
EFS Start: 3B0000 Size: 0x50000
IMEI 1: 353XXXXXXXXXX61
IMEI 2: 353XXXXXXXXXX79
[4][21C]Password: 1234
[4][2A2]Password: 0000
[4][2A1]Password: 0000
[4][21C]Password: 1234
[4][2A2]Password: 0000
[COLOR="#FF0000"][4][2A1]Password: 1980[/COLOR]
Total Time: 00:00:08
Done.[/B]