تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

chahourhassan11

عضو موقوف
إنضم
25 نوفمبر 2015
المشاركات
26
مستوى التفاعل
10
النقاط
0
الإقامة
https://t.me/pump_upp
Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.3
Selected model: Ascend Y330-U01
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
[72]Detected: MediaTek PreLoader USB VCOM (Android) (COM72)
\\?\usb#vid_0e8d&pid_2000#5&1028b29f&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[216]META Port Detected: MediaTek USB VCOM (Android) (COM216)
USB\VID_0E8D&PID_2007\5&1028B29F&0&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6572,S01
[AP]APP_VER: ALPS.JB3.MP.V1.37
[META]BaseBand CPU : MT6572, E01
[META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V15.P11
[META]HW_VER : HUAWEI72_WE_JB3_HSPA_HW
Phone imei[1] : 865705028229191
Phone imei[2] : 865705028229191
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
All done
 

chahourhassan11

عضو موقوف
إنضم
25 نوفمبر 2015
المشاركات
26
مستوى التفاعل
10
النقاط
0
الإقامة
https://t.me/pump_upp
Selected connection metod: ADB Mode
Exe version: NCKBox AndroidMTK 1.8.7.5
Selected model: Orange HIRO
Action: Unlock
Unlock Start.
Phone lcd must be on and unlocked.
If ask for SU acces, accept it.
Device have root
---BOARD INFO----

Manufacturer: TCT

Device: California

Version: 4.2.2

Board: California

Model: Orange Hiro



---PHONE INFO---

TYPE: GSM

IMEI : 862151023132952

--CPU INFO--

Processor : ARMv7 Processor rev 3 (v7l)

Hardware : MT6572

Revision : 0000

uid : 9996

gid : 9997

Unlock OK(1).

Unlock OK(2).

Wait untill phone restart.
 

MS-GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
2,440
مستوى التفاعل
679
النقاط
0
الإقامة
Oran
السلام عليكم

كود:
Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.8.5
Selected phone: MT6572_EMMC
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside. 
Please insert USB cable now...
Detected(7) : MediaTek PreLoader USB VCOM (Android) (COM7) 
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[40] MediaTek Inc. (COM40) 
USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&2&0002 
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P53
HW_VER : JRDHZZ72_WE_72_KK_HSPA_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 356688065345193
Phone imei[2] : 356688065345185
Simlock Info : Sim [1]
Block1[N] :Unlocked Code : 98301898
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 11112222
Block4[C] :Unlocked Code: 33334444
Block5[SIM]:Unlocked Code: 55556666
**************************************
Simlock Info : Sim [2]
Block1[N] :Locked [remain:0] Code : 98301898
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 11112222
Block4[C] :Unlocked Code: 33334444
Block5[SIM]:Unlocked Code: 55556666
**************************************


1.Power phone with unacepted simcard.
2.Type code code when phone ask about.
3.For advansed info power phone with original card.
4.Type *#*#3646633#*#* and from engeneering menu select SIMMELOCK


If phone relock after power off, enter unlock code and make wipe.
 
التعديل الأخير:

hassan GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
1,876
مستوى التفاعل
1,740
النقاط
113
Reset Phone condor Griffe_T5

NckBox Spreadtrum module 0.6

ACTION: Read Info.
Detecting phone, wait...
Making 10 sec timeout..
Detected: SPRD U2S Diag (COM22)

Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2
HW Version: sc7731e_modem
06-20-2018 11:11:40
Build number: Griffe_T5-user 8.1.0 OPM2.171019.012 5 release-keys
Serial number: SP630SC1807008892
IMEI 1: 000000000000000
IMEI 2: 000000000000000
BT: 4045DAD0A2DD
WIFI: 000000000000
Done.


Action: Reset Phone.
Detecting phone, wait...
Detected: SPRD U2S Diag (COM22)

Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2
HW Version: sc7731e_modem
06-20-2018 11:11:40
IMEI 1: 000000000000000
IMEI 2: 000000000000000
DONE
DONE
DONE
DONE
Reset done, phone must restart.
Done.
 

عمر19

:: Super User::
إنضم
25 فبراير 2013
المشاركات
1,161
مستوى التفاعل
1,657
النقاط
113
نبدأ على بركة الله

حصري و الأول في المنتدى

فك شفرة
Wiko Sunny 3 إصدار 8.0.1

802808584.jpg
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
بفضل من الله
حدف حساب غوغل
INFINIX X623 (HOT 6X) 8.1.0

Exe Version: NckDongle Qualcomm Module 0.12.3
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM83) detected.
Hello received.
HW ID: 00000000E1600500
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8917
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14,56 GB Partitions count: 49
[010BEFDF]Userdata Size: 8,37 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\Mus\Documents\NckDongle\qualcomm_module\qc_module_Logs\reset_frp_MSM8917_00000000E1600500_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F2.txt
Total Time: 00:00:07
Done.
[
/COLOR]
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
CONDOR P8 Lite REPAIR Imei DONE

CONDOR P8 Lite REPAIR Imei DONE

190118101619914448.png
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
حدف حساب غوغل SAMSUNG A520F
اصدار 7,0
حماية U4 على واجهة ULTIMATE FRP TOOLS 0.5

[url=http://www.up-00.com/] [/URL]
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
REPAIR IMEI INFINIX X5010
[url=http://www.up-00.com/] [/URL]

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected phone: ELBRUS
Action : IMEI REPAIR.
IMEI[1] for write : 3517XXXXXXX752
IMEI[2] for write : 3590XXXXXXXX205
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[7]Detected: MediaTek PreLoader USB VCOM (Android) (COM7)
\\?\usb#vid_0e8d&pid_2000#6&14f5796d&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[125]META Port Detected: MediaTek USB VCOM (Android) (COM125)
USB\VID_0E8D&PID_2007\6&14F5796D&0&1
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6580, E01
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V91.5.P7
[META]HW_VER : HQ6580_WE_ITA_N_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 3517XXXXXX1752
Phone imei[1] : 3517XXXXXXX752
IMEI to repair: [2] 359XXXXXXXX205
Phone imei[2] : 3590XXXXXXX205
Clean Boot flag ok.
All done.[
/SIZE]
 

.:: Bouamama _ Gsm ::.

:: مشرف ::, :: قسم السوفت ويير والبرمجة ::, ,
إنضم
29 أبريل 2015
المشاركات
1,233
مستوى التفاعل
584
النقاط
0
الإقامة
TLEMCEN
فك شفرة مودل ألكاتل أوريدو mw40v

exe version: Nck box v6.6.1
imei checksum seems ok
brand: Alcatel modem
model: L100
imei: 35...............
Nck : 1147349849
nsck : 0445219660
spck : 1742445123
sim : 0244498515
c : 5194231523
other :9301012593
--------------------------
 

.:: Bouamama _ Gsm ::.

:: مشرف ::, :: قسم السوفت ويير والبرمجة ::, ,
إنضم
29 أبريل 2015
المشاركات
1,233
مستوى التفاعل
584
النقاط
0
الإقامة
TLEMCEN
تفليش LENOVO A1000
EXE: NckBox Spreadtrum Module 0.6
ACTION: Flash Firmware.
SCENARIO: SC7731
Selected firmware: A1000_USR_S29576_1510212227_SPRD7731_ROW.pac
Detected: SPRD U2S Diag (COM30)
Sending loader, keep boot key untill loader start.
Reconnecting .
Detected: SPRD U2S Diag (COM30)
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
First boot done.
Send Second Loader.
Repartition OK.
Start write: wfixnv1
Start write: wcnfixnv1
Start write: prodnv
[uboot]Format OK.
Start write: splloader
Start write: wmodem
Start write: wdsp
Start write: wcnmodem
Start write: boot
Start write: recovery
Start write: system
Start write: oem
Start write: userdata
Start write: logo
Start write: fbootlogo
[wruntimenv1]Format OK.
[wcnruntimenv1]Format OK.
Start write: cache
[misc]Format OK.
Start write: uboot
Flashing done.
 

.:: Bouamama _ Gsm ::.

:: مشرف ::, :: قسم السوفت ويير والبرمجة ::, ,
إنضم
29 أبريل 2015
المشاركات
1,233
مستوى التفاعل
584
النقاط
0
الإقامة
TLEMCEN
إصلاح شبكة moto g5 xt1676 على umt

كود:
Port    : Network Interface (Factory Mode)
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : Network Fix
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (5)
Bootloader    : 0xB823
Baseband    : M8937_11.16.02.51R CEDRIC_EMEADSDS_CUST
Build    : Blur_Version.25.246.4.cedric.retail.en.US
Android    : 7.0
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1676
Boot Ver.    : moto-msm8937-B8.23
Baseband    : M8937_11.16.02.51R CEDRIC_EMEADSDS_CUST
Software    : Blur_Version.25.246.4.cedric.retail.en.US
IMEI    : 3514214785525885557774
CPU    : MSM8937
RAM    : 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B
EMMC    : 16GB SAMSUNG RE1BMB RV=08 PV=0D FV=000000000000000D
Sending Repair Data... Done
Both Imei should be OK now and you must get network.
If still NO SERVICE, please full flash phone with latest firmware.
Elapsed Time: 02:05
[Module Ver. 5.2]
Log Saved to Logs\190212_103021.log
 
التعديل الأخير:

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
حدف حساب غوغل INFINIX X609 SMART2 HD على Ultimate Multi Tool - MTK

[url=https://www.0zz0.com] [/URL]
Brand : Infinix
Model : Smart 2 HD (X609)
Operation : Reset FRP
Using Custom DA!
Qt: Untested Windows version 6.2 detected!
,
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM179)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Infinix
Manufacturer : INFINIX MOBILITY LIMITED
Model : Infinix X609
Prod. Name : H8025
Device : Infinix-X609
Android Ver. : 8.1.0
Display ID : X609-H8025AB-GO-181130V129
Patch Level : 2018-12-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.8]
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
حدف حساب غوغل XIAOMI MI 6 اصدار MIUI 10 ANDROID 8.0

[url=https://www.0zz0.com] [/URL]
انفو

كود:
Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM24)
Driver Info	: Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1E00500 [8998] 00000000
OPK_DATA	: F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8998_002]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: MSM8996, UFS, 64 GB
LU Count	: 6 [0x00D40800] [0x00000800] [0x00000800] [0x00008000] [0x00194000] [0x00008000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi MI 6 [msm8998]
Software	: OPR1.170623.027, 8.6.28 [Thu Jun 28 16:10:07 CST 2018]
Android Ver.	: 8.0.0
Patch Level	: 2018-05-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.0
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
حدف حساب MI ACCOUNT اصدار MIUI 10 ANDROID 8.0
[url=https://www.0zz0.com] [/URL]

كود:
Operation	: Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM24)
Driver Info	: Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1E00500 [8998] 00000000
OPK_DATA	: F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8998_002]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: MSM8996, UFS, 64 GB
LU Count	: 6 [0x00D40800] [0x00000800] [0x00000800] [0x00008000] [0x00194000] [0x00008000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi MI 6 [msm8998]
Software	: OPR1.170623.027, 8.6.28 [Thu Jun 28 16:10:07 CST 2018]
Android Ver.	: 8.0.0
Patch Level	: 2018-05-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.0
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
CONDOR P7 Plus PGN-523 REPAIR Imei DONE

CONDOR P7 Plus PGN-523 REPAIR Imei DONE

190419091045714903.png
 

hassan GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
1,876
مستوى التفاعل
1,740
النقاط
113
قراءة Stream B1s


Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM142)
Build ID: O11019
Display ID: MD40B1s.DZ.V5.0.0.20181108
Version: 8.1.0
Model: B1s
Brand: STREAM
Device: B1s
Manufacturer: STREAM
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 356781092673222
IMEI[2] from NVRAM: 356781092673230
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing odmdtbo
Reading: BEGIN: 0x4600000 - LEN: 0x1000000
Start processing vendor
Reading: BEGIN: 0x6000000 - LEN: 0x12000000
Start processing frp ......
Reading: BEGIN: 0x18000000 - LEN: 0x100000
Start processing trustzone
Start processing nvdata ......
Reading: BEGIN: 0x18b00000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x1d200000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0x1e000000 - LEN: 0x59000000
Saved to : C:\Users\Documents\Android_MTK\firmware_backup\MT6580_EMMC_STREAM_B1s_8_1_0_2019_05_02_13_42)
Wait untill phone will start charging.
[0]All done.
 

hassan GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
1,876
مستوى التفاعل
1,740
النقاط
113
قراءة Stream B2Plus

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 13014E51324A393551 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM142)
Build ID: O11019
Display ID: HB45B2Plus.DZ.V10.0.0.2018.11.22
Version: 8.1.0
Model: HT28
Brand: STREAM
Device: B2Plus
Manufacturer: EastAeon
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 352548090762669
IMEI[2] from NVRAM: 352548090762677
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing odmdtbo
Reading: BEGIN: 0x8b00000 - LEN: 0x1000000
Start processing vendor
Reading: BEGIN: 0xc000000 - LEN: 0x19800000
Start processing system
Reading: BEGIN: 0x25800000 - LEN: 0x55800000
Start processing sdrpmb ......
Reading: BEGIN: 0x1cf780000 - LEN: 0x1800000
Saved to : C:\Users\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_STREAM_HT28_8_1_0_2019_05_02_13_36)
Wait untill phone will start charging.
[0]All done.
 

hassan GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
1,876
مستوى التفاعل
1,740
النقاط
113
قراءة فلاشة ACE_CLEVER 1

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010047443642 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM142)
Build ID: O11019
Display ID: AS0618_V09_20190122
Version: 8.1.0
Build Date: Tue Jan 22 10:17:47 CST 2019
Model: CLEVER 1
Brand: ACE
Device: AS0618
Manufacturer: ACE France
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing recovery
Start processing frp ......
Reading: BEGIN: 0x3588000 - LEN: 0x100000
Start processing nvcfg ......
Reading: BEGIN: 0x3688000 - LEN: 0x2000000
Start processing nvdata ......
Reading: BEGIN: 0x5688000 - LEN: 0x4000000
Start processing protect1 ......
Reading: BEGIN: 0xb688000 - LEN: 0x800000
Start processing protect2 ......
Reading: BEGIN: 0xbe88000 - LEN: 0x978000
Start processing proinfo
Reading: BEGIN: 0xd200000 - LEN: 0x300000
Start processing md1img
Start processing oemisc
Reading: BEGIN: 0x13900000 - LEN: 0x100000
Start processing scp1 ......
Reading: BEGIN: 0x13a00000 - LEN: 0x100000
Start processing scp2 ......
Reading: BEGIN: 0x13b00000 - LEN: 0x100000
Start processing tinysys-sspm.bin.img
Reading: BEGIN: 0x13c00000 - LEN: 0x100000
Start processing nvram
Start processing lk ......
Start processing boot
Start processing logo ......
Start processing odmdtbo
Reading: BEGIN: 0x1c800000 - LEN: 0x1000000
Start processing trustzone
Start processing vendor
Reading: BEGIN: 0x1e800000 - LEN: 0x32000000
Start processing system
Reading: BEGIN: 0x50800000 - LEN: 0xd6000000
Saved to : C:\Users\Documents\Android_MTK\firmware_backup\MT6765_EMMC_ACE_CLEVER 1_8_1_0_2019_03_29_01_22)
[helio]Wait untill phone will start charging.
[0]All done.
 
أعلى