تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

فيصل16 · 12 يناير 2021

Starlight M09 Flash done

Ahmed-GsM · 16 يناير 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor G5 (PHQ520) Flash Done

كود:

[B][FONT=Arial Black][SIZE=2]EXE: NckBox Spreadtrum Module 1.4
ACTION: Flash Firmware.
Selected firmware: zsw609e_Condor_G5_PHQ520.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Detected: SCI USB2Serial (COM5)
[00:00:00] Sending loader.
BOOT: ~SPRD3W
~
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:02] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:02] First boot done.
[00:00:02] Sending second loader.
[00:00:07] Second loader sent ok.
[00:00:07] Reading: miscdata
[00:00:07] Reading: wfixnv1
NVRAM saved to: C:\Users\Ahmed GsM\Documents\spreadtrum_module\spd_nvram_backup\_3582XXXXXXX707\_3582XXXXXXX707_nvram_backup.tar
[00:00:17] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:19] Start write: wcnfixnv1
[00:00:19] Start write: prodnv
[00:00:20] Format: uboot
[00:00:20] [uboot]Format OK.
[00:00:20] Start write: splloader
[00:00:20] Start write: wmodem
[00:00:22] Start write: wdsp
[00:00:23] Start write: wcnmodem
[00:00:26] Start write: boot
[00:00:28] Start write: recovery
[00:00:30] Start write: system
[00:05:26] Start write: oem
[00:05:29] Start write: persist
[00:05:30] Start write: sysinfo
[00:05:31] Start write: userdata
[00:05:35] Start write: logo
[00:05:36] Start write: fbootlogo
[00:05:36] Format: wruntimenv1
[00:05:36] [wruntimenv1]Format OK.
[00:05:36] Format: wcnruntimenv1
[00:05:36] [wcnruntimenv1]Format OK.
[00:05:36] Start write: cache
[00:05:38] Format: misc
[00:05:38] [misc]Format OK.
[00:05:38] Start write: uboot
Flashing done.
Wait untill phone restart.
Log saved:
C:\Users\Ahmed GsM\Documents\spreadtrum_module\Saved_Logs\_writepac__1.txt
Total Time: 00:05:55
Done.
[/SIZE][/FONT][/B]

Ahmed-GsM · 23 يناير 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor G4s (PHQ519) Flash Done

كود:

[B][FONT=Arial Black][SIZE=2]EXE: NckBox Spreadtrum Module 1.4
ACTION: Flash Firmware.
Selected firmware: sw699_condor.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Detected: SCI USB2Serial (COM5)
[00:00:00] Sending loader.
BOOT: ~SPRD3W
~
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:01] First boot done.
[00:00:01] Sending second loader.
[00:00:04] Second loader sent ok.
[00:00:04] Reading: miscdata
[00:00:04] Reading: wfixnv1
NVRAM saved to: C:\Users\Ahmed GsM\Documents\spreadtrum_module\spd_nvram_backup\_3573XXXXXXXX45\_3573XXXXXXXX45_nvram_backup.tar
[00:00:11] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:12] Start write: wcnfixnv1
[00:00:12] Start write: prodnv
[00:00:14] Format: uboot
[00:00:15] [uboot]Format OK.
[00:00:15] Start write: splloader
[00:00:15] Start write: wmodem
[00:00:18] Start write: wdsp
[00:00:19] Start write: wcnmodem
[00:00:19] Start write: boot
[00:00:23] Start write: recovery
[00:00:26] Start write: system
[00:07:55] Start write: userdata
[00:08:05] Start write: logo
[00:08:05] Format: wruntimenv1
[00:08:05] [wruntimenv1]Format OK.
[00:08:05] Format: wcnruntimenv1
[00:08:05] [wcnruntimenv1]Format OK.
[00:08:05] Start write: cache
[00:08:08] Format: misc
[00:08:08] [misc]Format OK.
[00:08:08] Format: internalsd
[00:08:12] [internalsd]Format OK.
[00:08:12] Start write: uboot
[COLOR="#FF0000"]Flashing done.
Wait untill phone restart.
Log saved:
C:\Users\Ahmed GsM\Documents\spreadtrum_module\Saved_Logs\_writepac__2.txt
Total Time: 00:08:22
Done.
[/COLOR][/SIZE][/FONT][/B]

Ahmed-GsM · 24 يناير 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Alcatel OT-799 Unlock

Ahmed-GsM · 24 يناير 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Lenovo A1000 Safe Format Userdata

كود:

[B][FONT=Arial Black][SIZE=2]Custom loader: A1000_USR_S113_1705252051_SPRD7731_TRUE.loader
Phone Storage: EMMC
EXE: NckBox Spreadtrum Module 1.4
SELECTED: Autodetect by loader
ACTION: Format Userdata(misc)
Custom loader: A1000_USR_S113_1705252051_SPRD7731_TRUE.loader
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM5)
Sending loader, keep boot key untill loader start.
Reconnecting .
Detected: SCI USB2Serial (COM5)
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Manufacturer: LENOVO
Hardware: SP7731GEA_HD_V1.0.0
Platform: sc8830
Build product name: A1000
Build description: A1000-user 5.0 S100 A1000_S30666_161121_ROW release-keys
Product name: A1000
Board: A1000
Build Id: S100
Model: Lenovo A1000
Android Release: 5.0
Android Version: A1000_USR_S30666_1611211455_SPRD7731_ROW
Security patch: 2016-07-01
[misc]Formating userdata, wait...
Wait untill phone will restart.
Log saved:
C:\Users\Ahmed GsM\Documents\spreadtrum_module\Saved_Logs\SP7731GEA_HD_V1.0.0_A1000_USR_S30666_1611211455_SPRD7731_ROW_format_userdata_misc.txt
Total Time: 00:00:10
Done.
[/SIZE][/FONT][/B]

llcoolr · 24 يناير 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

ALCATEL 5051D

كود:

Exe Version: NckBox Qualcomm Module 0.12.8
Operation: Read Info
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM31) detected.
Hello received.
HW ID: 00000000E1009600 MSM8909
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait.. 
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8909
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 7,28 GB  Partitions count: 36
[0084F3DF]Userdata Size: 4,15 GB
Manufacturer: TCL
Cpu: armeabi-v7a
Build Id: MMB29M
Model: 5051D
Android Release: 6.0.1
Android Version: MMB29M release-keys
Config: default,diag,serial_smd,serial_tty,adb
Security patch: 2016-05-01
IMEI: 357368072686447
Model: 5051D-2AALDZ1-1
Secro: XPA0HM00BR20
Restarting phone.....

FRP remove

كود:

Exe Version: NckBox Qualcomm Module 0.12.8
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM31) detected.
Hello received.
HW ID: 00000000E1009600 MSM8909
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait.. 
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8909
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 7,28 GB  Partitions count: 36
[0084F3DF]Userdata Size: 4,15 GB
Erasing Alcatel FRP, wait.....
Erasing FRP, finished
Restarting phone.....

READ FIRMWARE

كود:

Exe Version: NckBox Qualcomm Module 0.12.8
Operation: Dump Firmware
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM31) detected.
Hello received.
HW ID: 00000000E1009600 MSM8909
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait.. 
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8909
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 7,28 GB  Partitions count: 36
[0084F3DF]Userdata Size: 4,15 GB
IMEI: 357368072686447
Model: 5051D-2AALDZ1-1
Secro: XPA0HM00BR20
Manufacturer: TCL
Cpu: armeabi-v7a
Build Id: MMB29M
Model: 5051D
Android Release: 6.0.1
Android Version: MMB29M release-keys
Config: default,diag,serial_smd,serial_tty,adb
Security patch: 2016-05-01
[0] [ PrimaryGPT ] Reading: gpt_main0.bin
[0] [ BackupGPT ] Reading: gpt_backup0.bin
[0] [ modem ] Reading: NON-HLOS.bin
[0] [ sbl1 ] Reading: sbl1.mbn
[0] [ aboot ] Reading: emmc_appsboot.mbn
[0] [ rpm ] Reading: rpm.mbn
[0] [ tz ] Reading: tz.mbn
[0] [ boot ]Reading: boot.img
[0] [ fsg ] Reading: study.tar
[0] [ sec ] Reading: sec.dat
[0] [ traceability ] Reading: traceability.mbn
[0] [ mobile_info ]Reading: mobile_info.img
[0] [ splash ] Reading: splash.img
[0] [ misc ] Reading: misc.img
[0] [ cache ]Reading: cache.img
[0] [ system ] Reading: system.img
[0] [ recovery ]Reading: recovery.img
[0] [ userdata ]Reading: userdata.img
Saved to: C:\Users\LLCOOLR\Documents\NckBox\qualcomm_module\qc_firmware\TCL_MMB29M_5051D_6_0_1_357368072686447_5051D-2AALDZ1-1_XPA0HM00BR20\
Restarting phone.....

Ahmed-GsM · 29 يناير 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight Gionee Star

Boot Info + Reset To Factory + Reset FRP + Read Firmware

Boot Info

كود:

[B][FONT=Arial Black][SIZE=2] Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9.3
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6763 1 ca01
 Using Algo 1.
 Helio MT6763 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: FALSE
 Sending loader.....
 BBCHIP MT6763
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A39 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM16)
[COLOR="#FF0000"] [system]Reading info, wait...
 Build ID: PPR1.180610.011
 Display ID: Starlight_Gionee_Star.V1.05_20190719
 Version: 9
 Build Date: Fri Jul 19 16:38:15 CST 2019
 Model: Gionee_Star
 Brand: Starlight
 Device: Gionee_Star
 Manufacturer: Starlight
 This phone have FRP partition.
 Modem version: MOLY.LR12A.R2.MP.V86.P1
 [helio]Wait untill phone will start charging.
 [0]All done.
[/COLOR][/SIZE][/FONT][/B]

Reset To Factory

كود:

[B][FONT=Arial Black][SIZE=2] [MISC]Action: Reset To Factory.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9.3
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6763 1 ca01
 Using Algo 1.
 Helio MT6763 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: FALSE
 Sending loader.....
 BBCHIP MT6763
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A39 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM16)
[COLOR="#FF0000"] Resetting userdata.
 [helio]Wait untill phone will start charging.
 [0]All done.
[/COLOR][/SIZE][/FONT][/B]

Reset FRP

كود:

[B][FONT=Arial Black][SIZE=2] Exe version: NCKBox AndroidMTK 2.9.3
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6763 1 ca01
 Using Algo 1.
 Helio MT6763 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: FALSE
 Sending loader.....
 BBCHIP MT6763
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A39 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Modem version: MOLY.LR12A.R2.MP.V86.P1
 Starting helio frp, not disconnect phone untill done
[COLOR="#FF0000"] [HELIO][frp]Format partition, please wait...
 [0]FRP Reset Done.
 [helio]Wait untill phone will start charging.
 [0]All done.
[/COLOR][/SIZE][/FONT][/B]

Read Firmware

كود:

[B][FONT=Arial Black][SIZE=2] Action : Read Firmware.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9.3
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6763 1 ca01
 Using Algo 1.
 Helio MT6763 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: FALSE
 Sending loader.....
 BBCHIP MT6763
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A39 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM16)
[COLOR="#FF0000"] [system]Reading info, wait...
 Build ID: PPR1.180610.011
 Display ID: Starlight_Gionee_Star.V1.05_20190719
 Version: 9
 Build Date: Fri Jul 19 16:38:15 CST 2019
 Model: Gionee_Star
 Brand: Starlight
 Device: Gionee_Star
 Manufacturer: Starlight
 Modem version: MOLY.LR12A.R2.MP.V86.P1
[/COLOR] [COLOR="#008000"]Start dumping flash, this can take up to 1 hour.......
 Dumping Preloader.
 Partition: boot_para
 Partition: recovery
 Partition: para
 Partition: expdb
 Partition: frp
 Partition: nvcfg
 Partition: nvdata
 Partition: metadata
 Partition: protect1
 Partition: protect2
 Partition: seccfg
 Partition: persist
 Partition: sec1
 Partition: proinfo
 Partition: md1img
 Partition: md1dsp
 Partition: spmfw
 Partition: sspm_1
 Partition: sspm_2
 Partition: gz1
 Partition: gz2
 Partition: nvram
 Partition: lk
 Partition: lk2
 Partition: boot
 Partition: logo
 Partition: dtbo
 Partition: tee1
 Partition: tee2
 Partition: teksunhw
 Partition: vendor
 Partition: system
 Partition: cache
 Partition: userdata
 Partition: flashinfo
 Start processing recovery 
 Start processing protect1.img ......
 Reading:  BEGIN: 0xb688000        - LEN: 0x800000        
 Start processing protect2.img ......
 Reading:  BEGIN: 0xbe88000        - LEN: 0x978000        
 Start processing proinfo.bin ......
 Reading:  BEGIN: 0x10200000       - LEN: 0x300000        
 Start processing md1img 
 Start processing md1dsp 
 Start processing spmfw 
 Start processing sspm_1 
 Start processing nvram.bin ......
 Reading:  BEGIN: 0x17800000       - LEN: 0x4000000       
 Start processing lk 
 Start processing boot 
 Start processing logo ......
 Start processing dtbo  dtbo.img
 Reading:  BEGIN: 0x1e200000       - LEN: 0x800000        
 Start processing trustzone
 Start processing vendor  vendor.img
 Reading:  BEGIN: 0x1f800000       - LEN: 0x22800000      
 Start processing system
 Reading:  BEGIN: 0x42000000       - LEN: 0xa5800000      
 Saved to : C:\ProgramData\Android_MTK_Backup_Folder\firmware_backup\MT6763_EMMC_PPR1_180610_011__9_Gionee_Star_Starlight_2021_01_29_10_04)
 [helio]Wait untill phone will start charging.
 [0]All done[/COLOR].
[/SIZE][/FONT][/B]

فيصل16 · 2 فبراير 2021

Redmi GO FRP RESET By EDL Mode

Ahmed-GsM · 4 فبراير 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor T9 SP648 Safe Format Userdata

فيصل16 · 15 فبراير 2021

Condor H1 SP620 FRP Reset By EDL Mode

Condor H1 (SP620) FRP Reset By EDL Mode

(Volume up + Volume down)

فيصل16 · 26 مارس 2021

Huawei Y3C (Y336-U02) Flash Done

كود:

EXE: NckBox Spreadtrum Module 1.4ACTION: Flash Firmware.
Selected firmware: Y336-U02V100R001C328B109.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Detected: SPRD U2S Diag (COM6)
[00:00:00] Sending loader.
BOOT: ~SPRD3W
~
Sending loader, keep boot key untill loader start.
[00:00:03] Loader ok
[00:00:03] Reconnecting .
Detected: SPRD U2S Diag (COM6)
[00:00:05] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:05] First boot done.
[00:00:05] Sending second loader.
[00:00:09] Second loader sent ok.
[00:00:09] Reading: miscdata
[00:00:09] Reading: wfixnv1
NVRAM saved to: C:\Users\fayca\Documents\spreadtrum_module\spd_nvram_backup\_862906038214461\_862906038214461_nvram_backup.tar
[00:00:18] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting SimLockSign id: 0x19F
Protecting SupportGsmOnly id: 0x7E4
Protecting SimLockCustomize id: 0x1F0
Protecting SimLockUserdata id: 0x1F1
Protecting SimLockCtrlkey id: 0x1F2
[00:00:20] Format: dlstat
[00:00:20] [dlstat]Format OK.
[00:00:20] Start write: prodnv
[00:00:22] Format: uboot
[00:00:23] [uboot]Format OK.
[00:00:23] Format: globalinfo
[00:00:23] [globalinfo]Format OK.
[00:00:23] Start write: splloader
[00:00:23] Start write: wmodem
[00:00:30] Start write: wdsp
[00:00:31] Start write: boot
[00:00:39] Start write: recovery
[00:00:46] Start write: system
Drop comunication, waiting for data
Drop comunication, waiting for data
Drop comunication, waiting for data
[00:11:37] Start write: userdata
[00:12:03] Start write: logo
[00:12:03] Start write: fbootlogo
[00:12:04] Start write: sysinfo
[00:12:07] Start write: custom
[00:12:53] Format: wruntimenv1
[00:12:53] [wruntimenv1]Format OK.
[00:12:53] Start write: cache
[00:12:57] Format: misc
[00:12:57] [misc]Format OK.
[00:12:57] Start write: uboot
[00:12:58] Start write: dlstat
Flashing done.
Wait untill phone restart.
Log saved:
C:\Users\fayca\Documents\spreadtrum_module\Saved_Logs\_writepac_.txt
Total Time: 00:13:12
Done.

فيصل16 · 8 مايو 2021

Condor Griffe T9 (SP648) FRP Reset

Condor Griffe T9 (SP648) FRP Reset

كود:

[/B][/SIZE]Phone Storage: EMMC[/CENTER] EXE: NckBox Spreadtrum Module 1.7 SELECTED: SC9863A_GENERIC ACTION: Erase FRP Start Detect phone. Phone must be off with battery inside. Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM6) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. New flash metod detected. UID: T32B68_15_6_24 *************** Build ID: PPR1.180610.011 CPU arhitecture: arm64-v8a Manufacturer: SPA Condor Electronics Hardware: s9863a1h10 Build product name: Griffe_T9 Build description: SP648_V14_20190606 Product name: Griffe_T9 Build Id: PPR1.180610.011 Model: Griffe T9 Android Release: 9 Android Version: SP648_V14_20190606 Security patch: 2019-04-01 This phone have frp partition. Removing frp, wait... Format OK. Wait untill phone restart. Log saved: C:\Users\fayca\Documents\spreadtrum_module\Saved_Logs\SP648_V14_20190606_erase_frp.txt Total Time: 00:00:44 [CENTER]Done.[SIZE=6][B]

فيصل16 · 27 مايو 2021

Kiowa X4 Flash done

كود:

EXE: NckBox Spreadtrum Module 1.8ACTION: Flash Firmware.
Selected firmware: KIOWA_X4_V003_20170601.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM6)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:02] Loader ok
[00:00:02] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:03] First boot done.
[00:00:03] Sending second loader.
[00:00:08] Second loader sent ok.
[00:00:08] Reading: miscdata
[00:00:08] Reading: wfixnv1
NVRAM saved to: C:\Users\fayca\Documents\spreadtrum_module\flashmode_nvram_backup\_353222078134676\_353222078134676_nvram_backup.tar
[00:00:17] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:19] Start write: wcnfixnv1
[00:00:19] Start write: prodnv
[00:00:23] Format: uboot
[00:00:23] [uboot]Format OK.
[00:00:23] Start write: splloader
[00:00:24] Start write: wmodem
[00:00:32] Start write: wdsp
[00:00:33] Start write: wcnmodem
[00:00:34] Start write: boot
[00:00:43] Start write: recovery
[00:00:53] Start write: system
[00:08:34] Start write: persist
[00:08:36] Start write: sysinfo
[00:08:41] Start write: userdata
[00:08:54] Start write: logo
[00:08:55] Start write: fbootlogo
[00:08:55] Format: wruntimenv1
[00:08:55] [wruntimenv1]Format OK.
[00:08:55] Format: wcnruntimenv1
[00:08:55] [wcnruntimenv1]Format OK.
[00:08:55] Start write: cache
[00:09:01] Format: misc
[00:09:01] [misc]Format OK.
[00:09:01] Start write: uboot
[00:09:02] Start write: fbootlogo3
[00:09:02] Start write: fbootlogo4
[00:09:03] Start write: fbootlogo5
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\fayca\Documents\spreadtrum_module\Saved_Logs\_writepac__1.txt
Total Time: 00:09:30
Done.

فيصل16 · 12 يونيو 2021

Condor Plume L4 SP642 FRP Reset

كود:

Phone Storage: EMMCEXE: NckBox Spreadtrum Module 1.8
SELECTED: [COLOR=#ff0000]SC9863A_GENERIC[/COLOR]
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM48)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T31G52_21_16_7
***************
Build ID: PPR1.180610.011
CPU arhitecture: arm64-v8a
Manufacturer: SPA Condor Electronics
Hardware: s9863a1h10
Build product name: Plume_L4
Build description: Plume_L4-user 9 PPR1.180610.011 258 release-keys
Product name: Plume_L4
Build Id: PPR1.180610.011
Model: [COLOR=#ff0000]Plume L4[/COLOR]
Android Release: 9
Android Version: SP642_V15_20191111
Security patch: 2019-11-05
This phone have frp partition.
Removing frp, wait...
[COLOR=#ff0000]Format OK[/COLOR].
[2]Error write mod: 00000008
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\fayca\Documents\spreadtrum_module\Saved_Logs\SP642_V15_20191111_erase_frp.txt
Total Time: 00:00:46
Done.

Ahmed-GsM · 3 أكتوبر 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight M05 User Code Reset

كود:

[B][FONT=Arial Black][SIZE=2] EXE VERSION: NCKBox MTK Tool 4.0
 Connect phone in boot mode ...
 USB\VID_0E8D&PID_0003&REV_0100
 Com port ok : COM21
 Phone detected...Please wait
 Conected ok with target ...
 Reopen comport(COM21)
 BaseBand CPU : MT6261
 SW_VER : CSM-M05-V5
 HW_VER : BESTONE61m_CB_11C_HW
 Meta mode conected ok, start reading phone....
[COLOR="#FF0000"] User code(Active) : 1239870
[/COLOR] User code reset :OK
 META END OK.
 All done.[/SIZE][/FONT]
[/B]

Ahmed-GsM · 25 أكتوبر 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

فك شفرة Alcatel OT-506

كود:

[B][FONT=Arial Black][SIZE=2] EXE VERSION: NCKBox MTK Tool 4.0
 DA version: 5.1428.00.00
 USER SELECTION : BOOT INFO.
 MODEL SELECTED : OT-506
 PHONE MUST BE OFF WITH BATTERY INSIDE.
 Com port opened...Press power on
 Download DA now...You can release power on
 CHANGE BAUDRATE SUCCES :S_DONE(0)
 DA download finished...Getting phone info
 BaseBand CPU: MT6253_S00
 BaseBand CPU Secure Version : 3 (Secure baseband)
 FLASH TYPE : NOR
 ID: NOR:(256Mb+0Kb) [SPANSION] S25FL032P  size:0x02000000
 INT RAM: 1Mb
 EXT RAM NOT ACTIVATED.
 BOOT STYLE :S_NOR_FLASH_BOOT(1033)
 TRYING TO ACTIVATE SDRAM.
 ENABLE OK : SRAM Size :  128Mb
 Nor FAT Ranges = 0x01800000 length:0x007C0000
 OTP STATUS: OTP_LOCKED(3121)
 HARDWARE IMEI: 356078040556769
 SECRO RECORD EXIST.
 SECRO: XL66CF13
 IMEI: 35607XXXXXXX69
[COLOR="#FF0000"] Codes: 
 NCK   : 3239174004
 NSCK : 2004696193
 SPCK : 1002653897
 SIM   : 2222962422
 Corporate : 1041723540
[/COLOR] If code not accepted please reset phone
 Dump Secro OK : XL66CF13
 Disconnecting phone :S_DONE(0)
 ALL DONE.
[/SIZE][/FONT][/B]

Ahmed-GsM · 13 نوفمبر 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

STREAM B1s Flash Done

كود:

[B][FONT=Arial Black][SIZE=2] Flash files count is :16
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKBox AndroidMTK 2.9.7
 Scenario: [0]Safe Flash
 Phone must be off with battery inside. 
 Battery must be charged 
 Please insert USB cable now...
 For some phones need to keep "VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+" button untill inserting USB cable.
 Detected(3) : MediaTek PreLoader USB VCOM (Android) (COM3) 
 [3] \\?\usb#vid_0e8d&pid_2000#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) KSI 0x543232373038 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 700100543232373038 : 00000000000000
 EMMC UA SIZE: 0x1c8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1c8c00000      [7.137 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected(4) : MediaTek DA USB VCOM (Android) (COM4) 
 [4] \\?\usb#vid_0e8d&pid_2001#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Backup preloader saved in firmware directory.
 Warning, flashing preloader disabled! 
 If you change android version, preloader must be flashed.
 Starting flash.
 HINT:
 If phone stuck on logo, for some phones help factory reset.
 Select factory reset tab/reset to factory default.
 Wait untill phone will start charging.
 [0]All done.
[/SIZE][/FONT][/B]

Ahmed-GsM · 13 نوفمبر 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

LG K4 2017 (X230ds) Reset To Factory + Reset FRP

تبويت الجهاز بزر خفض الصوت -

كود:

[B][FONT=Arial Black][SIZE=2] [MISC]Action: Reset To Factory.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9.7
 Phone must be off with battery inside. 
 Battery must be charged 
 Please insert USB cable now...
 For some phones need to keep "VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+" button untill inserting USB cable.
 Detected(12) : USB Serial Device (COM12) 
 [12]  
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Resetting userdata.
 Wait untill phone will start charging.
 [0]All done.
[/SIZE][/FONT][/B]

كود:

[B][FONT=Arial Black][SIZE=2] Exe version: NCKBox AndroidMTK 2.9.7
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Phone must be off with battery inside. 
 Battery must be charged 
 Please insert USB cable now...
 For some phones need to keep "VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+" button untill inserting USB cable.
 Detected(12) : USB Serial Device (COM12) 
 [12]  
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.
[/SIZE][/FONT][/B]

Ahmed-GsM · 13 نوفمبر 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight Future FRP Reset Done

كود:

[B][FONT=Arial Black][SIZE=2] Exe version: NCKBox AndroidMTK 2.9.7
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Phone must be off with battery inside. 
 Battery must be charged 
 Please insert USB cable now...
 For some phones need to keep "VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+" button untill inserting USB cable.
 Detected(3) : MediaTek PreLoader USB VCOM (Android) (COM3) 
 [3] \\?\usb#vid_0e8d&pid_2000#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100464531324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.
[/SIZE][/FONT][/B]

Ahmed-GsM · 13 نوفمبر 2021

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Xiaomi Redmi 9A (dandelion) Unlocking bootloader Done

NckBox MTK

كود:

[B][FONT=Arial Black][SIZE=2] Exe version: NCKBox AndroidMTK 2.9.7
 Selected model: 0-By CPU  ELBRUS
 Action: [COLOR="#FF0000"]Unlock Bootloader[/COLOR]
 Phone must be off with battery inside. 
 Battery must be charged 
 Please connect phone in brom mode
 For some phones need to keep "VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+" button untill inserting USB cable.
 Detected(7) : MediaTek USB Port (COM7) 
 [7] \\?\usb#vid_0e8d&pid_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 CPU: MT6765 CPU code: 766 Target config: e7
***********************
 Secure boot enabled: true
 Need serial link authorization: true
 Need download agent authorization: true
 SWJTAG enabled: true
 EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
 Root cert required: false
 Memory read authorization: true
 Memory write authorization: true
 Cmd 0xC8 blocked: true
***********************
 Executing exploit, do not disconnect phone
 Exploit has been executed successfully.
 [3ac00]Dumping phone preloader.
 Preloader: C:\ProgramData\Android_MTK_Backup_Folder\preloader_backup\preloader_k62v1_64_bsp.bin
 Waiting for handle to become active......
 Reseived active handle repply from phone......
 Booting phone
 Detected(7) : MediaTek USB Port (COM7) 
 [7] \\?\usb#vid_0e8d&pid_0003#6&12e3c9ed&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6765 0 ca00
 Using Algo 1.
 Helio MT6765 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: FALSE
 Sending loader.....
 BBCHIP MT6765
 [1]Storage EMMC
 Block size: 512
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15011332CA0765 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Checking data, wait...
 
[COLOR="#FF0000"] Unlocking bootloader....
 Done.
[/COLOR] [helio]Wait untill phone will start charging.
 [0]All done.
[/SIZE][/FONT][/B]

تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: عضو محترف ::, ,

:: مراقب قسم السوفت ويير والبرمجة ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::