تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

WIKO JERRY2 Reset To Factory

Boot Info

[B] Action : [COLOR="#FF0000"]Boot Info[/COLOR].
 Selected WIKO:[COLOR="#FF0000"]Jerry 2[/COLOR]
 Exe version: NCKBox AndroidMTK 2.8
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :[COLOR="#FF0000"]MT6580[/COLOR]
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346132 
 EMMC FW VERSION: a5:00:00:00:00:00:00:00
 EMMC CID: 90014A483847346132 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [system]Reading info, wait...
 Build ID: [COLOR="#FF0000"]NRD90M[/COLOR]
 Display ID: [COLOR="#FF0000"]alps-mp-n0.mp2-V1_tinno6580.we.n_P136[/COLOR]
 Version: [COLOR="#FF0000"]7.0[/COLOR]
 Build Date: Fri Aug 11 16:12:05 CST 2017
 FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
 Mediatek Version Release: alps-mp-n0.mp2-V1_tinno6580.we.n_P136
 Model: [COLOR="#FF0000"]JERRY2[/COLOR]
 Brand: [COLOR="#FF0000"]WIKO[/COLOR]
 Device: [COLOR="#FF0000"]v2610[/COLOR]
 Manufacturer: [COLOR="#FF0000"]WIKO[/COLOR]
[COLOR="#FF0000"] This phone have FRP partition.[/COLOR]
 IMEI[1]: 35XXXXXXXXXX23
 IMEI[2]: 35XXXXXXXXXX22
 Wait untill phone will start charging.
 [0]All [COLOR="#FF0000"]done[/COLOR].[/B]

Reset To Factory

[B] [MISC]Action: [COLOR="#FF0000"]Reset To Factory[/COLOR].
 Selected WIKO:[COLOR="#FF0000"]Jerry 2[/COLOR]
 Exe version: NCKBox AndroidMTK 2.8
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :[COLOR="#FF0000"]MT6580[/COLOR]
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346132 
 EMMC FW VERSION: a5:00:00:00:00:00:00:00
 EMMC CID: 90014A483847346132 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
[COLOR="#FF0000"] Resetting userdata.[/COLOR]
 Wait untill phone will start charging.
 [0]All [COLOR="#FF0000"]done[/COLOR].[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

IRIS VOX POP Pro Reset FRP

[B] Action : [COLOR="#FF0000"]Boot Info[/COLOR].
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42 
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 150100464536324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [system]Reading info, wait...
 Build ID: O11019
 Display ID: [COLOR="#FF0000"]IRIS_VOX_POP_Pro_V05_20180828[/COLOR]
 Version: [COLOR="#FF0000"]8.1.0[/COLOR]
 Build Date: Tue Aug 28 20:07:03 CST 2018
 Model: [COLOR="#FF0000"]VOX POP Pro[/COLOR]
 Brand: [COLOR="#FF0000"]IRIS[/COLOR]
 Device: [COLOR="#FF0000"]VOX_POP_Pro[/COLOR]
 Manufacturer: [COLOR="#FF0000"]IRIS[/COLOR]
[COLOR="#FF0000"] This phone have FRP partition.[/COLOR]
 IMEI[1]: 35XXXXXXXXXXX10
 IMEI[2]: 35XXXXXXXXXXX28
 Wait untill phone will start charging.
 [0]All done.[/B]

[B] Exe version: NCKBox AndroidMTK 2.9
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: [COLOR="#FF0000"]Reset FRP[/COLOR]
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42 
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 150100464536324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Checking data, wait...
 
 Writing FRP, wait...
[COLOR="#FF0000"] FRP Reset Done.[/COLOR]
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor P6 Pro LTE PGN-528
Reset To Factory + Reset FRP


Boot Info

[B] Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM87)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :[COLOR="#FF0000"]MT6737T[/COLOR]
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [system]Reading info, wait...
 Display ID: [COLOR="#FF0000"]PGN528[/COLOR]
 Build ID: [COLOR="#FF0000"]NRD90M[/COLOR]
 Version: [COLOR="#FF0000"]7.0[/COLOR]
[COLOR="#FF0000"] FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
 Mediatek Version Release: WBL7361AC_0405_T8100[/COLOR]
 Brand: [COLOR="#FF0000"]condor[/COLOR]
 Device: [COLOR="#FF0000"]PGN528[/COLOR]
 Manufacturer: [COLOR="#FF0000"]SPA Condor Electronics[/COLOR]
 Model: [COLOR="#FF0000"]PGN528[/COLOR]
[COLOR="#FF0000"] This phone have FRP partition.[/COLOR]
 IMEI[1]: 35XXXXXXXXXXX49
 IMEI[2]: 35XXXXXXXXXXX47
 Wait untill phone will start charging.
 [0][COLOR="#FF0000"]All done[/COLOR].[/B]

Reset To Factory

[B] [MISC]Action: [COLOR="#FF0000"]Reset To Factory[/COLOR].
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM87)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :[COLOR="#FF0000"]MT6737T[/COLOR]
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
[COLOR="#FF0000"] Resetting userdata.[/COLOR]
 Wait untill phone will start charging.
 [0][COLOR="#FF0000"]All done[/COLOR].[/B]

Reset FRP

[B] Exe version: NCKBox AndroidMTK 2.9
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: [COLOR="#FF0000"]Reset FRP[/COLOR]
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM87)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :[COLOR="#FF0000"]MT6737T[/COLOR]
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Checking data, wait...
 
[COLOR="#FF0000"] Writing FRP, wait...
 FRP Reset Done.[/COLOR]
 Wait untill phone will start charging.
 [0][COLOR="#FF0000"]All done[/COLOR].[/B]

 

[NoriDz]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

iris vox 4s frp

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

SFR117 Unlock

[B]Exe Version: NCK BOX v6.6.3
IMEI checksum seems ok
Model: [COLOR="#FF0000"]SFR117[/COLOR]
IMEI: 86XXXXXXXXX68
NCK  : [COLOR="#FF0000"]4086289248[/COLOR]
NSCK: 2556996279
SPCK: 0509088361
SIM  : 3450723208
CORPORATE: 3462940558[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Samsung B310E Read Password

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Samsung B310E Repair Imei

[B]EXE: NckBox Spreadtrum Module 1.2
SELECTED: [COLOR="#FF0000"]SC6530[/COLOR]
ACTION: [COLOR="#FF0000"]Repair Imei[/COLOR].
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6530
FlashId: WINBOND: [0x800000]W25Q64FW
Reading Flash Info, wait...
Flash Size: $800000 Sector Size: $10000
Start IMEI repair.
NVRAM Status: NV_MINVALID_SOK
READED IMEI 1: 3579XXXXXXXXX82
READED IMEI 2: 357XXXXXXXXXX80
[COLOR="#FF0000"]Write Done[/COLOR].
[COLOR="#FF0000"]Repair IMEI done[/COLOR].
Total Time: 00:02:31
Done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight I star two Reset FRP


Boot Info

[B]Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6739 2 cb00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010052383231 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [system]Reading info, wait...
 Build ID: O11019
 Display ID: PU562WAE3C_KT5508_Starlight_I_star_two_V06_20181011
 Version: 8.1.0
 Model: I star two
 Brand: Starlight
 Device: I_star_two
 Manufacturer: Droi
 This phone have FRP partition.
 Modem version: MOLY.LR12A.R2.MP.V48.12
 [helio]Wait untill phone will start charging.
 [0]All done.[/B]

Reset FRP

[B] Exe version: NCKBox AndroidMTK 2.9
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6739 2 cb00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010052383231 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Modem version: MOLY.LR12A.R2.MP.V48.12
 Starting helio frp, not disconnect phone untill done
 [HELIO][frp]Format partition, please wait...
 [0]FRP Reset Done.
 [helio]Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Starlight Safari Flash Done

الفلاشة المستعملة من رفع الاخ الكريم دراجي
https://www.dzgsm.com/vb/threads/75163-starlight-safari-v312/

[B] Flash files count is :19
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6739 0 ca00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 8801034D384231 : 000000000000000000
 EMMC UA SIZE: 0x39d000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x39dc00000      [14.465 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 Starting flash helio.
  [3] WRITE TO PARTITION [ recovery ] 
  [15] WRITE TO PARTITION [ md1img ] 
  [16] WRITE TO PARTITION [ md1dsp ] 
  [17] WRITE TO PARTITION [ spmfw ] 
  [18] WRITE TO PARTITION [ mcupmfw ] 
  [22] WRITE TO PARTITION [ lk ] 
  [23] WRITE TO PARTITION [ lk2 ] 
  [24] WRITE TO PARTITION [ loader_ext1 ] 
  [25] WRITE TO PARTITION [ loader_ext2 ] 
  [26] WRITE TO PARTITION [ boot ] 
  [27] WRITE TO PARTITION [ logo ] 
  [28] WRITE TO PARTITION [ odmdtbo ] 
  [29] WRITE TO PARTITION [ tee1 ] 
  [30] WRITE TO PARTITION [ tee2 ] 
  [31] WRITE TO PARTITION [ teksunhw ] 
  [33] WRITE TO PARTITION [ system ] 
  [34] WRITE TO PARTITION [ cache ] 
  [35] WRITE TO PARTITION [ userdata ] 
 [helio]Wait untill phone will start charging.
 [0]All done.[/B]

 

[فيصل16]

Alcatel S By SFR 101 Unlock

ALCATEL S By SFR 101 Unlock

​

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor P4 Plus PGN527

Reset To Factory + Reset FRP

Reset To Factory

[B] [MISC]Action: Reset To Factory.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x463832324d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463832324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 Resetting userdata.
 Wait untill phone will start charging.
 [0]All done.[/B]

Reset FRP

[B] Exe version: NCKBox AndroidMTK 2.9
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x463832324d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463832324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Oppo F1s Flash Done

[B] [COLOR="#0000FF"]Flash files count is :18
 Action : Firmware update.
 Selected Model: OPPO: F1S
 Exe version: NCKBox AndroidMTK 2.9[/COLOR]
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Keep VOL+ button untill inserting USB cable.
 Detected : MediaTek USB Port (COM35)
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6755 1 cb00
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 Loading emmi from download
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6755
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010052583142 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [COLOR="#0000FF"]Starting flash helio[/COLOR].
  [2] WRITE TO PARTITION [ recovery ] 
  [18] WRITE TO PARTITION [ md1img ] 
  [19] WRITE TO PARTITION [ md1dsp ] 
  [20] WRITE TO PARTITION [ md1arm7 ] 
  [21] WRITE TO PARTITION [ md3img ] 
  [23] WRITE TO PARTITION [ lk ] 
  [24] WRITE TO PARTITION [ lk2 ] 
  [25] WRITE TO PARTITION [ boot ] 
  [26] WRITE TO PARTITION [ logo ] 
  [27] WRITE TO PARTITION [ tee1 ] 
  [28] WRITE TO PARTITION [ tee2 ] 
  [29] WRITE TO PARTITION [ secro ] 
  [32] WRITE TO PARTITION [ system ] 
  [35] WRITE TO PARTITION [ cache ] 
  [36] WRITE TO PARTITION [ userdata ] 
 [helio]Wait untill phone will start charging.
 [0][COLOR="#0000FF"]All done[/COLOR].[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor f-trios (pfs 207) Read PhonePassword

[B]EXE: NckBox Spreadtrum Module 1.3
SELECTED: [COLOR="#FF0000"]SC6531E[/COLOR]
ACTION: [COLOR="#FF0000"]Read PhonePassword[/COLOR]
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.2
Changing bautrate OK.
Send Second Loader.
Flash ID: [EF4016] WINBOND: [0x400000]W25Q32FV size: 0x400000
SN: XXXXXXXXXXXXX
EFS Start: 3D0000 Size: 0x30000
IMEI 1: 353XXXXXXXXXXX
IMEI 2: 353XXXXXXXXXXX
[4][21E]Password: 1234
[4][2A6]Password: 1122
[COLOR="#FF0000"][SIZE=4][6][2A5][active]Paasword: 198716[/SIZE][/COLOR]
Total Time: 00:00:05
[COLOR="#FF0000"]Done[/COLOR][/B].

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Alcatel Pixi3 7_3G (OT-9002X) Reset To Factory

Boot Info

[B]Action : [COLOR="#FF0000"]Boot Info[/COLOR].
 Selected [COLOR="#FF0000"]Alcatel:OT-9002X[/COLOR]
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 6582 1 ca01
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100385750443352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [custpack]Reading info, wait...
 Build ID: [COLOR="#FF0000"]KOT49H[/COLOR]
 Display ID: [COLOR="#FF0000"]ALPS.KK1.MP1.V2.16[/COLOR]
 Version: [COLOR="#FF0000"]4.4.2[/COLOR]
 Build Date: [COLOR="#FF0000"]Fri Aug 28 18:15:41 CST 2015[/COLOR]
 Model: [COLOR="#FF0000"]9002X[/COLOR]
 Brand: [COLOR="#FF0000"]TCL[/COLOR]
 Device: [COLOR="#FF0000"]Pixi3-7_3G[/COLOR]
 Manufacturer: [COLOR="#FF0000"]TCL[/COLOR]
 Region: FR

 Mediatek Version Release: ALPS.KK1.MP1.V2.16
 Phone have OTP partition.
 MODEL FROM PROINFO: 9002X-2AALDZ4-1
 SECRO FROM PROINFO: X1B0GZ00AU00
 OTP IMEI: 35XXXXXXXXXX88
 Wait untill phone will start charging.
 [0][COLOR="#FF0000"]All done[/COLOR].[/B]

Reset To Factory

[B] [MISC]Action: [COLOR="#FF0000"]Reset To Factory[/COLOR].
 Selected [COLOR="#FF0000"]Alcatel:OT-9002X[/COLOR]
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
 Boot mode: Preloader
 BBCHIP: 6582 1 ca01
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100385750443352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM29)
 [COLOR="#FF0000"][SIZE=3]Resetting userdata.
 Wait untill phone will start charging.
 [0]All done.[/SIZE][/COLOR][/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

kiowa X4 cristal Reset Phone

[B]Action: Reset Phone.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 2
Detected: SCI USB2Serial (COM10)
Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version   pike2_pubBASE  Version    FM_BASE_17C_W18.23.4_P2HW Version        sc7731e_modem06-20-2018 111140
IMEI 1: 86XXXXXXXXXX54
IMEI 2: 86XXXXXXXXXX62
IMEI 3: 86XXXXXXXXXX38
IMEI 4: 86XXXXXXXXXX46
DONE
DONE
DONE
DONE
Reset done, phone must restart.
Done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor P6 Pro Lte Reset To Factory + Reset FRP


Reset To Factory

[B] [MISC]Action: Reset To Factory.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737T
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM7)
 Resetting userdata.
 Wait untill phone will start charging.
 [0]All done.[/B]

Reset FRP

 [B]Exe version: NCKBox AndroidMTK 2.9
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737T
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

ACE BUZZ 1 Plus Reset FRP

[B] Action : [COLOR="#FF0000"]Boot Info[/COLOR].
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6739 0 ca00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010046453632 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM7)
 [system]Reading info, wait...
 Build ID: O11019
 Display ID: AS0318_V06_20180911
 Version: 8.1.0
 Build Date: Tue Sep 11 00:59:53 CST 2018
 Model: BUZZ 1 Plus
 Brand: ACE
 Device: BUZZ_1_Plus
 Manufacturer: ACE France
[B][SIZE=3] This phone have FRP partition.[/SIZE][/B]
 Modem version: MOLY.LR12A.R2.MP.V42.16
 [helio]Wait untill phone will start charging.
 [0]All done.[/B]

[B] Exe version: NCKBox AndroidMTK 2.9
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: [COLOR="#FF0000"]Reset FRP[/COLOR]
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6739 0 ca00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010046453632 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Modem version: MOLY.LR12A.R2.MP.V42.16
 Starting helio frp, not disconnect phone untill done
 [HELIO][frp]Format partition, please wait...
[COLOR="#FF0000"][SIZE=3] [0]FRP Reset Done.[/SIZE][/COLOR]
 [helio]Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

IRIS NEXT P PLUS Reset To Factory

[B] [MISC]Action: Reset To Factory.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6)
 Boot mode: Preloader
 BBCHIP: 337 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6753
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (233Gb+24576Mb) SAMSUNG 0x525831424d42 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100525831424D42 : 00000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM7)
 Resetting userdata.
 Wait untill phone will start charging.
 [0]All done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Lenovo A1000 Flash Done

[B]Detected: SCI USB2Serial (COM14)
[00:00:00] Sending loader.
BOOT: SPRD3W
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Reconnecting .
Detected: SCI USB2Serial (COM14)
[00:00:03] Wait for loader....
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:03] First boot done.
[00:00:03] Sending second loader.
[00:00:06] Second loader sent ok.
[00:00:06] Reading: miscdata
[00:00:06] Reading: wfixnv1
NVRAM saved to: C:\Users\Ahmed-GsM\Documents\spreadtrum_module\spd_nvram_backup\_869473026622893\_869473026622893_nvram_backup_1.tar
[00:00:16] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:17] Start write: wcnfixnv1
[00:00:17] Start write: prodnv
[00:00:19] Format: uboot
[00:00:19] [uboot]Format OK.
[00:00:19] Start write: splloader
[00:00:19] Start write: wmodem
[00:00:20] Start write: wdsp
[00:00:21] Start write: wcnmodem
[00:00:21] Start write: boot
[00:00:23] Start write: recovery
[00:00:25] Start write: system
[00:03:07] Start write: oem
[00:07:05] Start write: userdata
[00:07:22] Start write: logo
[00:07:22] Start write: fbootlogo
[00:07:22] Format: wruntimenv1
[00:07:22] [wruntimenv1]Format OK.
[00:07:22] Format: wcnruntimenv1
[00:07:22] [wcnruntimenv1]Format OK.
[00:07:22] Start write: cache
[00:07:23] Format: misc
[00:07:23] [misc]Format OK.
[00:07:23] Start write: uboot
Flashing done.
Log saved:
C:\Users\Ahmed-GsM\Documents\spreadtrum_module\Saved_Logs\_writepac__1.txt
Total Time: 00:07:54
Done.[/B]

 

[Ahmed-GsM]

رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox

Condor Griffe T3 (SP-414) Reset Userdata and Remove FRP

[B]Custom loader: SP414.loader
Phone Storage: EMMC
EXE: NckBox Spreadtrum Module 1.3
SELECTED: Autodetect by loader
ACTION: Reset Userdata and Remove FRP
Custom loader: SP414.loader
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM10)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
***************
Manufacturer: SPA Condor Electronics
Hardware: SP7731C_V1.0.0
Platform: sc8830
Fota platform: Sprd7731_7.0
Build product name: sp7731c_1h10
Build description: sp7731c_1h10_oversea-user 7.0 NRD90M eng.user.20171226.160548 release-keys
Product name: SP414
Board: sp7731cea
Build Id: NRD90M
Model: Griffe T3
Android Release: 7.0
Android Version: SP414_V07_20171226_160458
Security patch: 2017-10-05
Bootloader can be unlocked: 1
This phone have frp partition.
Removing frp, wait...
Format OK.
[misc]Formating userdata, wait...
Wait untill phone will restart.
Total Time: 00:00:08[/B]