تحديثات جميع تحديثات VolcanoBox.اخر تحديث 3.0.9

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
http://www.dzgsm.com/vb/showthread.php?t=11547&p=64054#post64054
86c81.gif




من الساعة ان شاء الله سوف نضع جميع تحديثات البوكس هنا .
التحديث الاخير طبعا2.9.9

جديد التحديث
انظر اخر صفحة.
 

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
Volcanobox V1.9.2 World's 1st Mstar Flash for Unlock & Coolsand Detection Solved

Worlds 1st Mstar Flash for unlock !!
Coolsand detection/Pinfind Solved !!
MTK6250 flashing update

وطبعا التحديث .على الميــــــــــــــديا فاير.
......هنا.....
 

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
................VolcanoBox 1.9.3 Coolsand Auto Boot Interduced & Mstar New Cpu & New Flash id Added




الجديد في التحديث..

Coolsand add new Boot_B
Coolsand new boot support auto read write flash
Mstar add new cpu support
Mstar New Flash Added
Fixed Mstar Bug


Details:

Volano box Released Coolsand BOOT_B. What is it?

This is for read and write mostly flash ic auto. don't need to select different Flash type. Keep in mind that this is in BETA state. it could have some problems. if you found any problem please report us.
from now you have two type of Boot. One is "Auto"and one is "Boot_B". whenever you run volcanobox keep in mind what you have select up side of software you can near BOOT FILE button. Select BOOT_B from boot and select AUTO from Flash Type and try to read and write different flash ic. at the moment 8851a and some other flash ic will not work on BOOT_B but in upcoming update we will add. So from now please test for us and report us which Flash ic and which Mcu work AUTO in BOOT_B. in 1.9.4 8851a and some other cpu & Flash type we will add. so now we are working on Fully Automatic Coolsand. Hope you will like us & Will Support us in future too.

التحميــــــــــــــــــل.
.....هنا.
او
هنــــــــــــــــا
 

driss_dz

:: Super User::, ,
إنضم
15 مارس 2012
المشاركات
1,204
مستوى التفاعل
2,773
النقاط
0
الإقامة
ilizi
................VolcanoBox 1.9.3 Coolsand Auto Boot Interduced & Mstar New Cpu & New Flash id Added




الجديد في التحديث..

Coolsand add new Boot_B
Coolsand new boot support auto read write flash
Mstar add new cpu support
Mstar New Flash Added
Fixed Mstar Bug


Details:

Volano box Released Coolsand BOOT_B. What is it?

This is for read and write mostly flash ic auto. don't need to select different Flash type. Keep in mind that this is in BETA state. it could have some problems. if you found any problem please report us.
from now you have two type of Boot. One is "Auto"and one is "Boot_B". whenever you run volcanobox keep in mind what you have select up side of software you can near BOOT FILE button. Select BOOT_B from boot and select AUTO from Flash Type and try to read and write different flash ic. at the moment 8851a and some other flash ic will not work on BOOT_B but in upcoming update we will add. So from now please test for us and report us which Flash ic and which Mcu work AUTO in BOOT_B. in 1.9.4 8851a and some other cpu & Flash type we will add. so now we are working on Fully Automatic Coolsand. Hope you will like us & Will Support us in future too.

التحميــــــــــــــــــل.
.....هنا.
او
هنــــــــــــــــا


رابط مباشر

http://p4.grab8.com/2/files/VolcanoTool_v1.9.3.rar
 

melizi_28

:: Super User::, ,
إنضم
16 مارس 2012
المشاركات
1,319
مستوى التفاعل
4,321
النقاط
113
VolcanoBox 1.9.4

Whats new ?

Added RDA 8851 & RDA8852 & some more to new BOOT_B
Added Format & Repair imei to new BOOT_B
Improve Mtk android emmc read & write flash

What is Boot_B ?

Boot_B is for Fully Automated for read & write & format & imei repair !!. This is still in beta. you can try and let us know the bugs and problems. how it will works ?

when ever you got any mobile

Select BOOT_B from BOOT FIle
Select AUTO from Flash Type

and try to do read and write or any other operation which you need to do.

if failed

Select AUTO from BOOT File
Select AUTO from FLASH TYPE

and try to do read and write or any other operation which you need to do.

if failed

Select AUTO from BOOT File
Select your Desire Flash Type

and try to do read and write or any other operation which you need to do.

if failed

Please Report us with all details.

Please make new thread and write which cpu you done on BOOT_B & Flash Type Auto and Which cpu you done on AUTO & Flash Type AUTO. like this we will know what and how we can improve.


Click here to Download
VolcanoBox Mirror Support Area
 

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
VolcanoBox1.9.4

التحميـــــــــــــــــــــــــــــل على الميديا فاير
..........هنا.....
المرفق .MTK Universal Drivers.rar
 

المرفقات

  • MTK Universal Drivers.rar
    10.9 KB · المشاهدات: 111

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
VolcanoBox 1.9.6 Grand Update Added SonyEricsson Xperia & Coolsand & Alcatal & More


We are Happy to Announce Grand update
Volcanobox 1.9.6


Whats new ?

1- Added SonyEricsson Xperia phones for Unlock

Here is list


  1. x10
  2. x10i
  3. x10a
  4. SO-01B
  5. E10i
  6. U20
  7. X8
  8. E15
  9. W8
  10. E16
  11. E16i
  12. LT15
  13. MK16
  14. MT11
  15. MT15
  16. R800
  17. SK17
  18. ST15
  19. St17
  20. ST18
  21. WT19
  22. Z1
  23. SO-01C
  24. SO-01D
  25. SO-03C
  26. S51se
  27. LT18

Keep in mind New Security is not supported !!

How To Unlock SonyEricsson Xperia Phones

1st of all you need to install drivers

How to install drivers ?

  • Go to Volcanobox\Drivers\SonyXperia
  • If you have phone which can be done without TP then open NON_TP_Drivers and install drivers OR if you have phone which can be done with TP then open TP_Drivers and install drivers
  • we need to connect the X10 in Flash Mode (it’s called boot mode or Download boot mode)
  • Remove battery from phone and insert it again
  • Make sure phone is Turned off condition
  • Press & Hold “back Button” from phone
  • While holding “Back Button” from phone insert/plug Usb cable into phone
  • ******s will ask you for drivers. If it’s not install auto then give path of drivers from Volcanobox Folder (Volcanobox\Drivers\SonyXperia)
  • Once it’s complete You had done 1st part Now you have to unplug mobile and make it completely power on
  • As your mobile powered up Go to settings , Application , Enable “Usb Debugging” ( in some phones USB debugging have in different ******** for example you need to go in settings, Application, Development, or in some phone setting, Development, )
  • After Enable Usb debugging connect usb cable to you phone and let it’s install drivers if not driver not install then give path of drivers from Volcanobox folder.
  • As it’s complete you are ready to Unlock your phone.


As Drivers installed you can Start Unlocking


  • 1. Open VolcanoBox and click on Xperia
  • 2. Make sure There is no Simcard in your mobile
  • 3. Make sure SD Card ( memory card ) inserted in the phone
  • 4. Make sure your phone have not Android ver 1.6 ( you must use 2.1 or later ver of Android )
  • 5. Make sure your phone is NOT rooted
  • 6. Make sure your phone not have any Custom rom
  • 7. Make sure your Internet Connection is work good and Firewall is turned-ff
  • 8. Make sure Usb debugging mode is enabled
  • 9. Make sure your Antivirus is turned-off
  • 10. Cllck on Get Info from VolcanoBox software
  • 11. Remove Battery and insert it again
  • 12. Press and hold Back Button
  • 13. Insert Usb cable while holding Back Button from phone
  • 14. If everything ok you will get info about your phone
  • 15. Now Click on Unlock
  • 16. Repeat operation from 8 to 10
  • 17. When software Ask you Remove Usb cable, complete power on your phone, Connect usb cable to phone, ( make sure Use Debugging is enabled )
  • 18. Wait till software complete it’s operation.
  • 19. Your phone is unlocked !!


Some Common Problems:



Unlock Not OK or Not Detecting Phone?
Possible causes:

  • 1. On Vista or ******s 7 32/64 Bit ******s, VolcanoBox must run as administrator (right click , select "run as administrator")

  • 2. Firewall or Antivirus is deleting files . Uninstall VolcanoSoftware and turn off antivirus and reinstall.
Phone shows no service after unlock:

  • 1. Remove Battery and wait 1 minute. Insert Battery and power on phone.
Software hangs while unlocking or detecting ADB device
Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again

TEST Point pictures & this Detailed manual already inside your volcanobox. just run volcano click on Help Manual button right after connect button. then click on How to Unlock Xperia Phones. you will see all details.

2- Coolsand Read / Write / Format More Stable then ever

Volcano Box introduced Boot_B for Coolsand. this is very stable version ever before. i want to share some thing about Coolsand.

Now Coolsand have two different Boots

1- built-in Auto
2- built-in BOOT_B


2- Built-in Boot_B
is fully Auto you don't need to select any thing. just make sure you have selected Boot_B from Boot and Auto from Flash id. if you want to format also you don't need to write any format address. We had tested lot of phones for formatting with 4mb , 8mb , 16mb, and we success. You can see reports from here
Beta Test Volcano Box v1.9.6 Game ON
If somehow you still face some problem please report us on forum or send me pm


1- Built-in AUTO
This is Auto and Manual both. if you select Auto from boot and Auto from Flash id it will work auto. but if somehow you want to do manual work then you can select Auto from boot and Select your DESIRE FLASH ID from flash id and you can do work.

This is still BETA we research lot of new things and we are working on it soon you guys will have Fully Auto and Fully Bugs free ver and Fully Supported coolsand phones. At the moment we support maximum cpu and maximum flash id which still other not do.



3- Coolsand Read USER Area
4- Coolsand Write USER AREA


[FONT=&quot]Read & Write User Area is for repair signals in coolsand phones, Read & Write user area is for repair Usercode problems in Coolsand phones, Read & Write user area is for repair blinking problems, in other words read & write user area is very use full. in other words you can say it's NV. but it have more than NV area
wink.gif
[/FONT]



[FONT=&quot]5- Added Write Flash Security for Coolsand[/FONT]


1. In COOLSAND BOOT_B you try to write any file and volcano say to "you Writing this file is risky" This mean your readed flash is not good and volcano will not write your flash file. this is for avoid after write flash mobile dead. if you still want to write this flash file you can use built-in AUTO and select your desire flash id Volcano will write flash file but not sure your mobile will come alive or not or your mobile become dead.






[FONT=&quot][FONT=&quot]6- Added More Manuals in Volcano box[/FONT][/FONT]
[FONT=&quot][FONT=&quot]7- [/FONT][/FONT][FONT=&quot][FONT=&quot]Adjust Coolsand Find pass algorithm [/FONT][/FONT]
[FONT=&quot][FONT=&quot]8- [/FONT][/FONT][FONT=&quot][FONT=&quot]Added Alcatel MTK Android Phones for Direct Unlock & Read Code ( Sp Unlock ) [/FONT][/FONT]

[FONT=&quot][FONT=&quot]here is list[/FONT][/FONT]



  • [FONT=&quot][FONT=&quot]OT-S600 [/FONT][/FONT]
  • [FONT=&quot][FONT=&quot]OT-S710 [/FONT][/FONT]
  • [FONT=&quot][FONT=&quot]OT-S800[/FONT][/FONT]
  • [FONT=&quot][FONT=&quot]OT-J610 [/FONT][/FONT]
  • [FONT=&quot][FONT=&quot]OT-S500 [/FONT][/FONT]
  • [FONT=&quot][FONT=&quot]OT-S810 [/FONT][/FONT]
  • [FONT=&quot][FONT=&quot]OT-S820 [/FONT][/FONT]
  • [FONT=&quot][FONT=&quot]OT-S850 [/FONT][/FONT]


Click here to download Full INSTALLER !!

AT ALL BETA TESTERS. PLEASE REDOWNLOAD IT. WE MODIFY IT.


رابط اخر...Hotfile.com: Hأ©bergement de fichiers par un clic: VolcanoTool_v1.9.6_FullInstaller_New.rar


 

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
VolcanoBox 1.9.7 MTK Android New Boot V7.1304Supported More Flash SPD 6530a new Flash

VolcanoBox 1.9.7

Whats new ?


  • MTK Android added new Boot V7.1304 ( more flash id is supported )
  • Adjust MTK625A Write Flash
  • Solve MTK Android Read and Write break-off
  • Solve SPD6530 Read Flash bug
  • Solve Coolsand Find Pass bug
  • More Stable for SPD6530a Cpu !!

للتحميل من هنا
او
من
هنا
.
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
VolcanoBox 1.9.8 MTK 625a Imei Repair with USB, SPD Android Format, MTK Andrid


VolcanoBox 1.9.8 MTK 625a Imei Repair with USB, SPD Android Format, MTK Andrid

1.ADJUST MTK 625A IMEI CHANGE (COM.USB

2.ADJUST SPD ANDROID FORMAT

2.OPTIMIZE MTK ANDROID BOOT V7.1304 READ/WRITE





 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
VolcanoBox 1.9.9

Truly World's 1st

▬●
Truly World's 1st ALL MTK ANDROID ROOT (beta)
▬●
Truly World's 1st MTK ANDROID CUSTOM AREA WRITE FLASH
▬●
Truly World's 1st MTK ANDROID CUSTOM AREA READ FLASH
▬●
Truly World's 1st SPD ANDROID IMEI REPAIR
▬● MTK6253 decryption



How to Root Any MTK Android phone ?

1- Set pinouts or detect pinouts
2- Go to mtk tab
3- Select Boot Built-in-Boot-12
4- Click on read info
5- Untick auto pinfind
6- Make sure your phone com port selected
7- Click on run
8- Read carefully BOOTIMG address
9- Click on Read Flash
10- Write BOOTIMG ADDR into Start Address ( without 0x )
11- Write BOOTIMG length into Flash Size ( without 0x )
12- Click on reset pinouts
13- Click on run
14- Save file
15- Go to Tools
16- Click on One-key Root
17- Click on Select Open
18- Select your read file of BOOTIMG
19- Click on Convert
20- Go to MTK tab
21- Click on write flash
22- Select Built-in-Boot-12
23- Select Converted File
24- Write BootIMG ADDR into START ADDRESS
25- Click on Reset pinouts
26- Click on write
27- After writing Your phone will be ROOTED !!!!!



How to Read and Write Custom/Specific Area File to MTK Android ?

1- Set pinouts or detect pinouts
2- Go to mtk tab
3- Select Boot Built-in-Boot-12
4- Click on read info
5- Untick auto pinfind
6- Make sure your phone com port selected
7- Click on run
8- Read carefully BOOTIMG address ( or your desire area address )
9- Click on Read Flash
10- Write BOOTIMG ( or your desire area address ) ADDR into Start Address ( without 0x )
11- Write BOOTIMG ( or your desire area length ) length into Flash Size ( without 0x )
12- Click on reset pinouts
13- Click on run
14- Save file ( your desire area file read done )



Now how you can write ?

1- Set pinouts or detect pinouts
2- Go to mtk tab
3- Select Boot Built-in-Boot-12
4- Click on write flash
5- Select Your desire File
6- Write BootIMG ( or your desire area address ) ADDR into START ADDRESS
7- Click on Reset pinouts
8- Click on write
9- Your desire File write done !!


How to Write SPD Android imei ?


1- goto detect tab
2-select spd from list
3-attach phone
4-click on detect tab
5- press detect (keep in mind where is D- and D+ gnd)
6- clear pinout
7-close volcano
8- again open volcano
9- mobile connect with volcano jig but volcano phone cable remove to volcano
10- go to detect tab select spd
11- select d-, d+ and gnd manual and set pinout(where it's detect before)
12- go to spd tab
13- R/W IMEI chooses com
14- untick auto detect pinout
15- press these key from keybord to enable imei alt+ctrl+i
16- select boot 6530
17-click on write imei
18-click run
19-new ****** will be open
20 -choose usb
21-write imei in box
22-click on write imei
23-then connect volcano jig cable jack in volcano


IF WRITE IMEI WITH USB CABLE DISSCONNECT USB + SUPPLY VCC WORK WITH ONLY THREE WiRE D+ D- GND

if write imei usb with usb cable and boot key mobile, dissconect usb + supply (vcc)
usb cable connect only D+ D- GND
1-go to spd tab
2-R/W IMEI chooses com
3-untick auto detect pinout
4-press these key from keybord to enable imei alt+ctrl+i
5-click on write imei
6-click run
7-new ****** will be open
8-choose usb NOT SELECT ANY COM PORT
9-write imei in box
10-click on write imei
11-then connect press mobile boot key and inseri usb(connect only three wire usb D+ D- GND VCC +SUPPLY NOT CONNECT) AFTER 10 15 SEC YOUR ANY SPD IMEI WRITE

Imei changing is illegal – imei repairing or changing is only for repairing original only !!

Click here to download Video



Click here to download 1.9.9
 

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
VolcanoBox2.0.0 World's 1st MTK6575 6577 6573 6589 6515 Andrid 4.x.x Imei repair ****

.
World's 1st

ALL MTK 65xx
ALL Android 4.x.x
Invalid Imei repair
Imei NULL repair


1 - !!!! Imei repair with **** mode Supported !!!!

No Root
No Flash
No hassle
Just one Click


how to repair imei ?

go to MTK TAB
do Enable imei
click on Android tool
click on Run
click on MTK 65xx New Method
Fill imei in boxes
click on Write imei
when software saying searching for port
Insert Usb cable to phone in powered OFF condition !!
waiting software for process complete
after 2 secs your imei repair



Possible problems :

You Drivers are conflicting
You Drivers port are High like 50~200
You didn't install 2nd time drivers
your 1st time drivers com port is ok but 2nd time drivers com port is high
Wrong Drivers installed
******s problem


some test reports
VolcanoBox Ver 2.0.0 world's 1st mt65xx 4.x.x imei repaired success BETA TEST REPORTS



Make sure you have Clean pc and Drivers are conflicting.

2 - Detailed VolcanoBox manual updated

Run Volcanobox
Click on Manual Help
Read Detailed volcanobox

Special Thanks to
Dipendra Pathak

3 - Adjust MTK Android EMMC flash read, write separate file and get ROOT permission.

4 - Solve some Coolsand phone dead problems after Write flash.

5 - Add 6530 new flash ic supported.

6 - Now we can add any 6530 Unsupported Flash ic.

Just send me pm Picture of Flash ic and screen shot of error on volcano. we will add those unsupported flash ic in next upcoming updates.

click here to download
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
Volcanobox 2.0.1 More stable ver & for Coolsand, SPD & MTK Flash id added

VolcanoBox 2.0.1

whatsnew ?


World's 1st Coolsand added new flash ic
( which other failed )
Solved Many Coolsand problems
World's 1st Introduced MTK dul-encryption
World's 1st Added Mstar Flash ic ( which other failed )
World's 1st Added SPD Flash ic( which other failed )



Click here to download
 

شاكر

عضو أساسي
إنضم
21 مارس 2013
المشاركات
224
مستوى التفاعل
451
النقاط
0
VolcanoBox2.0.1 PATCH !!! Coolsand BUG FIXED which comes after 2.0.1 !!!

VolcanoBox 2.0.1 Patch

Coolsand bug fixed which comes on 2.0.1 yesterday's update !!

17456417.jpg



click here to download 2.0.1 PATCH

what you have to do

If you already downloaded 2.0.1 Yesterday update from this link then you just download 2.0.1 Patch and Extract files from Rar file into VolcanoBox 2.0.1 Folder.

So you will be solved !!!


fixedoc.jpg



Br

Faisal_Computer
 

شاكر

عضو أساسي
إنضم
21 مارس 2013
المشاركات
224
مستوى التفاعل
451
النقاط
0
VolcanoBox 2.0.2 World's 1st 8853C 16 MB & SF_N25W128 & SF_N25W32 Read & Write Done

Volcanobox 2.0.2


World's 1st

World's 1st
Coolsand/RDA 8853c 16 MB Supported Read Correct Flash Boot A
World's 1st Coolsand/RDA 8853c 16 MB Supported Write Correct Flash Boot B

SF_N25W32 Read and Write !!
Improved Coolsand/RDA Read Flash
Improved Coolsand/RDA Write Flash
Improved Coolsand/RDA User Code


De******ion:

Coolsand/Rda Read flash improved. it's strongly recommend Read Flash again from working phone from Boot_B and Boot_Auto. Save file with both ****s like X202 Boot Auto.bin and X202Boot B.bin. like this you will have rare chance of corrupted flash file.
For 8853c you have to read flash from Boot Auto and Write it from Boot_B. In next upcoming updates we will make it Auto will not need to select different boots.
I had seen you guys were have problem in

8853A
CPU ID: 880A 7002(CT8853B)
Flash ID : 002CCB16
Flash Type: SF_N25W32
Flash Len :0x400000(4M)

and

8853C
CPU ID: 880A 7002(CT8853B)
Flash ID : 002CCB18
Flash Type: SF_N25W128
Flash Len :0x1000000(16M)

Which we solved and i had tested working super fine.

if some how you Flash your phone and it's still dead then you have to read flash from working phone and write on faulty phone your phone will be ok. if you don't have Same working phone then test different phones.

Some Friend saying coolsand reading and writing Speed is little slow. so Please select 1843200 from baud rate you will see the difference.

if some how read full flash failed with boot b then select boot auto and it will read complete flash file.

Must Watch this Video.. Read Flash full and Write Flash and Mobile not DEAD !!!!

Youtube



Dailymotion for Those Users who can't watch Youtube

VolcanoBox World's 1st Coolsand_RDA 8853c 16MB Flash read_Write done - Video Dailymotion





Click here to download
 

شاكر

عضو أساسي
إنضم
21 مارس 2013
المشاركات
224
مستوى التفاعل
451
النقاط
0
Volcanobox 2.0.3 Samsung Unlock - MTK Android Write Flash - MTK One Click Root

Volcanobox 2.0.3

Whats new ?

1.Added These Samsung Models

* Support and auto root and backup/restore efs for versions upto 4.1.1

* Samsung exynos Flash chip support upto version 4.1.2 No more Damage IMEI After Unlock and auto root up to Version 4.1.1



  • GT=I8190 (Galaxy S3 MINI) Safe Direct Unlock/Auto Root until version 4.1.1
  • GT-I9001 (Galaxy S Plus) Safe Direct Unlock/Auto Root
  • GT-I9300 auto root and safe unlock until version 4.1.1
  • GT-I9100 auto root and safe unlock until version 4.1.1
  • GT-N7000 auto root and safe unlock until version 4.1.1
  • GT-N7100 auto root and safe unlock until version 4.1.1
  • GT-N8000 auto root and safe unlock until version 4.1.1
  • GT-I9000 auto root and safe unlock until version 4.1.1
  • GT-I9000B auto root and safe unlock until version 4.1.1
  • GT-I9003 auto root and safe unlock until version 4.1.1
  • GT-S6102 auto root and safe unlock until version 4.1.1
  • GT-N7000 auto root and safe unlock until version 4.1.1
  • SGH-T959 auto root and safe unlock until version 4.1.1
  • SGH-T959V auto root and safe unlock until version4.1.1
  • SGH-T989 auto root and safe unlock until version 4.1.1
  • SGH-I997 auto root and safe unlock until version 4.1.1

and many more auto root and safe unlock until version 4.1.1

2.Added MTK Andriod one-key Root

3.Adjust MTK Andriod Write flash


Last 3 updates:

VolcanoBox 2.0.2 World's 1st 8853C 16 MB & SF_N25W128 & SF_N25W32 Read & Write Done

Volcanobox 2.0.1 More stable ver for Coolsand, SPD & MTK!World's 1st Flash id added

VolcanoBox2.0.0 World's 1st MTK6575 6577 6573 6589 6515 Andrid 4.x.x Imei repair ****

Click here to download

 

شاكر

عضو أساسي
إنضم
21 مارس 2013
المشاركات
224
مستوى التفاعل
451
النقاط
0
VolcanoBox 2.0.4 SE ST18 - Coolsand 16MB Imei - SPD Android - MTK Android - MTK Imei

VolcanoBox 2.0.4

Whats new ?


World's 1st Coolsand 16MB Imei Repair
World's 1st Coolsand 16Mb Flash ic Supported SF_GD25LQ128
Adjust MTK6250 Imei Change
Adjust MTK Android Read Flash bug
Adjust MTK 6253 Write Flash
Solve SonyEicsson ST18 bug
Adjust SPD imei tool

Click here to download

[Click here to Download Media Fire


Some Test Reports !!
 

شاكر

عضو أساسي
إنضم
21 مارس 2013
المشاركات
224
مستوى التفاعل
451
النقاط
0
VolcanoBox 2.0.5 World's 1st Karbonn A1+ Format/Wipe/Imei Supported Ultimate Indian's

Before i sTaRt
A Very Special Thanks to
MobileClinic

VolcanoBox 2.0.5
Ultimate Indian's Version

World's 1st Karbonn A1+ Format Supported

World's 1st Karbonn A1+ Wipe Supported

World's 1st Added SPD Andriod Imei New Method
Added SPD 6800H Write NV



How to Imei Change SPD CPU with New Easy Method?

1-First select Detect tab
2-select CPU RX-TX SPD CPU
3-click detect button
4-tick after setting switches to Platform
5-setpinouts
6-tick imei repair New Method
7-click Run
8-New ****** open
9-select port
10-Select imei type
11-Fill imei No in Imei tab
12-click Start
13-then Show Please Connect phone
14-press power button



Click here to download
Click here to Download Media Fire ( Thanks for Qaiser )
 

شاكر

عضو أساسي
إنضم
21 مارس 2013
المشاركات
224
مستوى التفاعل
451
النقاط
0
VolcanoBox 2.0.6 World's 1st MTK625a Direct Privacy Code & Android Recovery EDIT !!

VolcanoBox 2.0.6

!! World's 1st !!

Watch in HD !!



Video Link for NON Youtube users

volcanotoolv20620130428.jpg



World's 1st read recovery file
World's 1st Extract Recovery bin file
World's 1st Edit Recovery Bin File
World's 1st Repack Recovery bin
World's 1st MTK Direct Privacy Code Read





Click here to download

Some Details :

How to read Privacy password ?


Simply Read Flash file. Right after flash file read. Save it. Check logs you can see Privacy code !!

How to read Recovery Bin ?

Detect phone from Detect tab
Set pinout
go to Mtk tab
Select Boot 12
Click on One-key Root
Untick Auto Detect Pinout
From options Select Recovery
Select Run
Write file **** and click on Save ( Recovery.Bin )
Wait... let it complete

you will have file where you save !!

How To Extract & Repack Recovery Bin File ?

Go to MTK Tab
Click on One-Key Root
Untick Auto Detect Pinouts
From options Select Boot&Rec Tools
Click on Run
New ******s will open
Click Select Open
Select Your readed Recovery Bin File
Click on Split file

Now you have Extracted Recovery Bin File

Go to Same Folder where you had save Recovery Bin file
You have Folder there now you can edit files... After editing now

Click on Merge File

Now you have Custom/Edited Recovery Bin file and Ready to Flash !!!

For reference you can see Video ...
 

El_Hakim_Gsm

:: مراقب قسم البوكسات الصينية ::
إنضم
13 أغسطس 2012
المشاركات
5,762
مستوى التفاعل
19,174
النقاط
113
أعلى