برنامج آخر إصدار مكرك من برنامج فونيكس Phoenix_Service_Software_2012.16.004.48159_Cracked

AbdouDzGsm

:: Super User ::, ,
إنضم
16 أبريل 2012
المشاركات
4,270
مستوى التفاعل
15,382
النقاط
0
كود:
Main component versions in the release:
ٍ Product API 2012.14.7
ٍ Nokia Connectivity Cable USB Driver Version 7.1.78.0
ٍ Flash Update Package 2012.11
ٍ FUSE Connection Manager v 2012.14

ٍ Envira CL 2012.16


3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.4.3.47798


Error Corrections & changes:
ٍ New products: RM-653, RM-840, RX-103, RM-862, RM-864, RM-811, RM-827, RM-807, RM-841, RM-871, RM-863, RM-810,
  RM-812, RM-837

Please note:


ٍ Energy Management Calibration should not be performed for products using the "Quantum" engine (RM-689, RM-702, RM-704
  and other product using the same engine)
ٍ RM-653 settings added
ٍ Microsoft DOT.NET version 2 Service Pack 2 is now the minimum requirement. Phoenix installation will check PC for
  the DOT.NET version and update it automatically when PC has online connection. Without online connection, old DOT.NET
  versions must be updated manually.
ٍ New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
ٍ All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages
ٍ Please see articles SR1774 for more information on the use of Nokia Data Package manager - tool, and article SR1854
  for more information on the Nokia Service Application Manager Tool.
ٍ During installation, Data Packages should be installed in these directories, if they install to any other location
  by default. target folder for local data packages can be changed in the installation wizard manually
ٍ This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation
  Packages
ٍ Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off
  from Windows Control Panel settings.
ٍ For more information concerning new options in "Firmware Update" - menu and their use, Please see documents SR1313
  and SR1659 in KICS Information Center.
ٍ Tucson operations combined with "flash" - option are now handled in the same way as "refurbishment", which requires
  Mass Memory Content File to be available.
ٍ Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to
  flash phone separately with Firmware Update. Please refer to product specific instructions.
ٍ Connection media to FLS-5 must be configured to be "USB_FBUS", after FLS-4 support has been removed FBUS does not work
  anymore with FLS-5

4. KNOWN ERRORS & LIMITATIONS

ٍ N9- RM-696 Product Code change still unreliable
ٍ FLS-5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be serviced in 64 bit
  operating systems
ٍ Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
ٍ Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can be used with other
  product specific cables and adapters, but not with SS-46 Interface Adapter.
ٍ If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by
  very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation.
  If you experience problems when updating FPS-x prommers, please check that Phoenix ôPrommer maintenanceِ is looking for
  the files from the correct location which is ôC:\Program Files\Common Files\Nokia\Tss\Flashِ. If not, Phoenix will show
  error ôUpdate via ini û file failedِ. In this case, select ôUpdateِ from that Phoenix ôPrommer maintenanceِ û UI, browse
  to correct directory and select ôfpsxupd.iniِ for all other prommers except the FPS-8.
ٍ FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version 11 has been released
  to correct this. Sales pack code is 0089J83 , old HW version is not delivered anymore
ٍ Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
ٍ When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions,
  there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently;
  Phoenix will start after configuration is finished.
ٍ When using Data Package download functions with online connection, download times may occasionally be long. This is not
  caused by Phoenix (or Care Suite). The download speed from online servers is occasionally is known to be slow, depending
  on how data is buffered on caching servers.
ٍ After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
ٍ It is not possible to program Mass Media Content file to some devices over direct USB cable connection, due to the large
  size of the file. For these models a feature called ôMedia Checkِ has been implemented. When this type of product is
  connected to service software / PC via direct USB cable the refurbishment option will be disabled. Please use a flash
  prommer. Affected products using Media Check are: RM-122, RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320,
  RM-462, RM-472, RM-484, RM-505, RM-555, RM-559
ٍ To be able to use the help files in Windows 7 you need to install Windows Help program (WinHlp32.exe) for Windows 7.
  Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select "Help" and "Phoenix help". Click the "Microsoft Help and Support"
  website link.
  Download WinHlp32 and install it.- Go to http://www.microsoft.com. Type "WinHlp32" to "Search Microsoft.com" - field.
  Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it
ٍ When using flash prommers, only one connection type to one prommer is allowed. Please use either NFPD USB or NFPD TCPIP
  connection to one prommer, not both connections to same prommer

التحميل بملف تورنت في المرفقات
 

المرفقات

  • Phoenix_Service_Software_2012.16.004.48159_Cracked.rar
    17.3 KB · المشاهدات: 315
التعديل الأخير:

nanou255

صديق المنتدى
إنضم
16 مارس 2012
المشاركات
924
مستوى التفاعل
2,960
النقاط
93
الإقامة
الجزائر
بارك الله فيك عبد النور على البرنامج جاري التحميل
في مزان حسناتك
 

FaYsSaL_GsM

:: الإدارة ::
إنضم
15 مارس 2012
المشاركات
10,155
مستوى التفاعل
39,218
النقاط
113
الإقامة
Dzgsm
بارك الله فيك خوية على الجديد
تقبل تحياتي
ســـــلام
 

bjaia2010

عضو نشط
إنضم
19 أغسطس 2012
المشاركات
54
مستوى التفاعل
13
النقاط
8
تقبل الله منا ومنكم الصيام
وعيدكم مبارك جميعا:clap: :clapping::wavetowel2::victory:
 

Hamza42

:: Super User ::, ,
إنضم
16 مارس 2012
المشاركات
2,599
مستوى التفاعل
7,768
النقاط
0
الإقامة
تيبازة
مشكور اخي لكن الملف لا يفبل فك الضغط
نرجوا أن تعيد رفع الملف ليستفيد منه كل الأعضاء
 
التعديل الأخير:

AbdouDzGsm

:: Super User ::, ,
إنضم
16 أبريل 2012
المشاركات
4,270
مستوى التفاعل
15,382
النقاط
0
مشكور اخي لكن الملف لا يفبل فك الضغط
نرجوا أن تعيد رفع الملف ليستفيد منه كل الأعضاء
تفضل أخي بالتوفيق
 

المرفقات

  • Phoenix_Service_Software_2012.16.004.48159_Cracked.rar
    17.3 KB · المشاهدات: 45

Repair-Gsm

:: عضو مميز ::, بأقسام المنتدى ,
إنضم
2 مايو 2012
المشاركات
797
مستوى التفاعل
1,739
النقاط
93
ربي اجازيك كل خير اخي الكريم
 
أعلى