الان صار الاصدار 2.0 رسميا

الحالة
مغلق و غير مفتوح للمزيد من الردود.

MBtech

عضو أساسي
إنضم
26 فبراير 2016
المشاركات
738
مستوى التفاعل
619
النقاط
0
الإقامة
SBA
19-04-2018 Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options
نفس الاصدار الذي تم رفعه على السبورت منذ ايام هنا، و الذي تم الاعلان على انه غير رسمي!!!
http://www.infinity-box.com/support/?r=12

MTK 6570 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware - Factory Scatter format [ NAND supported - WorldFirst and unique! ]
Write Firmware - Factory Scatter Format [ NAND supported - WorldFirst and unique! ]
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6750 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6755 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6757 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6763 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6797 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

--- Under Test ---

MTK 6758 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6739 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

Main
- New look and design. All simplified and optimized much, as possible. [ please refer to v2 interface introduction ]
- New core. All code made from scratch.
- New boot chain selection mode - automatic ( via defined user combination ) or manual.
- New connection
- Complete error handling and explanation
- Internal EMIDB cover 99% of existing memory devices on both - NAND and eMMC devices
- Easy end user customization for adding support for new device etc.

Flasher
- Completely new flasher design, which allow customize whole flashing process [ please refer to v2 interface introduction ]

FW Reader
- Completely new core, which allow handle all existing types and flash devices.

Service
- Security repair NOT require reboot to meta, not required CDC drivers or whatever else. All direct.
- Format FS include different mode, optimized for different secure devices type ( with FORMAT, WRITE protection )
- During NVRAM read/write SW also verify it condition and data


MEMORY TOOL activated!
Easy, fast and ultimate solution now come in MTK too!
- Support eMMC and NAND flash IC secure
- Allow READ, WRITE, ERASE partitions
- Show partitions states and info only for eMMC devices
- Allow RE-init PMT ( from scatter )


Other
Lot of other changes from v1 line, which not mandatory to mention

Known issues/warnings/info:
1. [NAND on MT6570] v1712, v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
1. [NAND on MT6570] UBI SPARSE image flashing may take MUCH time (up to 5 minutes and more) for some devices!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-write data, which you want, ignore "EMPTY" states.
4. [MEMORY TOOL] Old protocol secure devices (MT6750/MT6755) - LeEco and similar
In some cases WIPE partition may not work!
5. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND/eMMC devices! Result - stuck after system/userdata partition flashing
6. FileSyhstems flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
7. Device with NV_TYPE2 security may not work yet for repair sec!
 
التعديل الأخير:

MDxavi

:: Super User ::, ,
إنضم
10 أغسطس 2014
المشاركات
1,982
مستوى التفاعل
3,814
النقاط
113
أخي واش من مهزلة ؟؟؟

لا تتابع تعليقات المستخدمين 98% منهم لا علاقة له بالميدان
 

MS-GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
2,440
مستوى التفاعل
679
النقاط
0
الإقامة
Oran
شكرا خي على التوضيح، فالمهزلة متواصلة من طرف الفريق بعد انتظار طويل يخرجولنا "خرجة من القصب" كيمل نقولو بالعامية.
 
التعديل الأخير:

MBtech

عضو أساسي
إنضم
26 فبراير 2016
المشاركات
738
مستوى التفاعل
619
النقاط
0
الإقامة
SBA
أخي واش من مهزلة ؟؟؟

لا تتابع تعليقات المستخدمين 98% منهم لا علاقة له بالميدان

بالعكس، تابعت الاعلانات الرسمية فقط..

على كل حال الفريق عهدناه مسؤولا و احترافيا منذ البداية، و انتقادي يبقى في حيز تضارب التصريحات الرسمية لا أكثر.

بالتوفيق.
 

MDxavi

:: Super User ::, ,
إنضم
10 أغسطس 2014
المشاركات
1,982
مستوى التفاعل
3,814
النقاط
113
بالعكس، تابعت الاعلانات الرسمية فقط..

على كل حال الفريق عهدناه مسؤولا و احترافيا منذ البداية، و انتقادي يبقى في حيز تضارب التصريحات الرسمية لا أكثر.

بالتوفيق.

أخي تحديثات الفريق دائما تطرح في السيبورت أولا

أحدف كلمة مهزلة فهي في غير محلها
 

MBtech

عضو أساسي
إنضم
26 فبراير 2016
المشاركات
738
مستوى التفاعل
619
النقاط
0
الإقامة
SBA
أخي تحديثات الفريق دائما تطرح في السيبورت أولا

أحدف كلمة مهزلة فهي في غير محلها

سأحذفها تطييبا لخاطرك أخي..

لكن لاحظت بقاءها رغم التعديل!!
 
التعديل الأخير:

Omar Nasri

:: Super User ::
إنضم
28 فبراير 2015
المشاركات
3,026
مستوى التفاعل
7,230
النقاط
113
الإقامة
Tiaret
خليو الفريق يخدم براحته وعندك لا يسمعو بيك .
ننتظر في صمت لابد أن تكون هناك مفاجئة
 

MDxavi

:: Super User ::, ,
إنضم
10 أغسطس 2014
المشاركات
1,982
مستوى التفاعل
3,814
النقاط
113
شكرا خي على التوضيح، فالمهزلة متواصلة من طرف الفريق بعد انتظار طويل يخرجولنا "خرجة من القصب" كيمل نقولو بالعامية.

واش من قصب ؟؟؟

أخي نحن في مجال صيانة الهواتف لاداعي للتعليقات الجانبية
 

MBtech

عضو أساسي
إنضم
26 فبراير 2016
المشاركات
738
مستوى التفاعل
619
النقاط
0
الإقامة
SBA
خليو الفريق يخدم براحته وعندك لا يسمعو بيك .
ننتظر في صمت لابد أن تكون هناك مفاجئة

رانا بعاد عليهم خويا و مهنيينهم..
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
المشكلة ان التحديث طرحه احد الاعضاء العاديين ... و ليس أحد المشرفين على الفريق ( يعني تسريب )

و بعد ذلك جاء احد المشرفين و قال انتظروا التحديث الرسمي للفريق !! ( لم نعهد هذا التصرف من الفريق )

التحديث الجديد على يحتوي على موديلات قديمة ... يعني غير البروسيسورات الجديدة ( يعني النية راح تكون بالإشتراك )

التحديث الجديد لا يلغي الإصدار القديم ... يعملان معا !!!
 

يونس GSM

عضو أساسي
إنضم
22 مايو 2012
المشاركات
834
مستوى التفاعل
522
النقاط
93
98في المئة انت منهم الاصدار مخصوص بعض الخصائص ومعظم الهوتف غير مدعومة


PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!
 
التعديل الأخير:

Omar Nasri

:: Super User ::
إنضم
28 فبراير 2015
المشاركات
3,026
مستوى التفاعل
7,230
النقاط
113
الإقامة
Tiaret
الفريق مزال يعمل على إصلاح البرنامج
وهذا ليس تحديث cm2 بل برنامج مكمل له mt2
لا تحتاج لإزالة cm2
كما في تحديث InfinityBox BEST Nk2 الأن أصبح الأثنين معا
 

MDxavi

:: Super User ::, ,
إنضم
10 أغسطس 2014
المشاركات
1,982
مستوى التفاعل
3,814
النقاط
113
98في المئة انت منهم الاصدار مخصوص بعض الخصائص ومعظم الهوتف غير مدعومة


PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!

أقرأ قبل أن تعلق :bangin:

CM2MT2 designed to support new models. If you are trying to connect phone with new software and you will see a nessage like "LEGACY MTK" - please use previous version 1.58 for this device !
 

يونس GSM

عضو أساسي
إنضم
22 مايو 2012
المشاركات
834
مستوى التفاعل
522
النقاط
93
انا استعمل فرجن 1.58 والموديلات الجديدة استعمل البوكسات الد ونغلات الاخرى اصدار فاشل شكرا
 
الحالة
مغلق و غير مفتوح للمزيد من الردود.
أعلى