حصري Condor Griffe T1 (SP413) Firmware Infinity SPRD PAC + Nvram

[LEFT]Set mode to : SP [SC983x] eMMC [Generic Android 7.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : Griffe_T1
Model Brand : Condor
Model Device: Griffe_T1
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
CompileDate : 01-08-2017 8:26:17
Project Ver : SP413_V12_20170801
Model Ext   : SP413

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:28

Reconnect Power/Cable![/LEFT]

[LEFT]Set mode to : SP [SC983x] eMMC [Generic Android 7.x]

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Griffe_T1
Model Brand : Condor
Model Device: Griffe_T1
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : SP413_V12_20170801
Model Ext   : SP413

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2506 MiB
Saved to : C:\Users\INFO.GSM\Desktop\SP9832A_2H11_VOLTE_Griffe_T1_7.0_SP413_V12_20170801_SP413\
Done!

Elapsed: 00:10:56

Reconnect Power/Cable![/LEFT]

[LEFT]Set mode to : SP [SC983x] eMMC [Generic Android 7.x]

Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read LTEx NV #1

Read Ok , 0x1AF8A
Saved to : C:\Users\INFO.GSM\Desktop\CX77xx_SPDNV.spdnv

Elapsed: 00:00:42

Reconnect Power/Cable![/LEFT]

[LEFT]

Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP9832A_2H11_VOLTE_Griffe_T1_7.0_SP413_V12_20170801_SP413
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC9832

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_l.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc983x_cp1.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : l__WPH_arm7.bin
[ADD FILE] : PM_arm7_sys.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : wcn_fdl.bin
[ADD FILE] : AA_MARLIN.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x001A
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:10

Saved to : SP9832A_2H11_VOLTE_Griffe_T1_7.0_SP413_V12_20170801_SP413.pac
Done!

[/LEFT]