تفليش وتعريب GALAXY NOTE II GT-N7105T بالإصدار 4.1.2 بنجاح على OCTOPUS
الكابل المستعمل: MICRO USB
أولا: تأكد من أن البطارية مشحونة جيدا ثم إدخال الجهاز وضع Downloader كما هو موضح في الصورة
ثانيا: عملية تحويل الـ FIRMWARE (الفلاشة) إلى صيغة .OCT
ثالثا: إختيار الـFIRMWARE (الفلاشة) ثم التفليش
الفلاشة ملف واحد بعد التحويل إلى صيغة OCT
بيانات العملية:
كود:
Welcome to Octopus Box Samsung software version 1.9.2
-----------------------------------------------------------------------------------
To connect GT-N7105T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial ********
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Close ********
11. Go to dial ********
12. Enter "*#9090#" number.
13. Select "DM/UM over HS-USB".
14. Restart phone.
15. Press "Read Info" in software.
Selected firmware file: N7105XXDMB2_N7105XEFDMB2_N7105XXDLL5_HOME.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-N7105T phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing TZSW section...
TZSW section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.رابط الفلاشة المستخدمة قبل تحويلها إلى صيغة OCT
