شكرا .... هل اعمل والهاتف في وضع الداونلودر ام ماذا
5. Repair
micro-uart cable:
1. Phone must be powered on.
2. Connect the phone to UART port.
3. Choose correct COM port in port settings
4. Press "Repair" button.
5. In opened ****** fill fields what you need to repair.
6. Press "OK".
micro-USB cable:
1. Phone must be powered on.
2. Type *#7284# and choise phone usb.
3. Type *#197328640#, select: Common - Diag Config - USB diag.
4. Reboot phone.
5. Connect USB cable, install drivers.
6. Select diagnostic port in port settings.
7. Press "Repair" button.
8. In opened ****** fill fields what you need to repair.
9. Press "OK".
If you got "Reading security ...error,Security data not found" errors, then you must check "New" in repair options.
اخي الفاضل اتبع الخطوات التالية :
كود:5. Repair micro-uart cable: 1. Phone must be powered on. 2. Connect the phone to UART port. 3. Choose correct COM port in port settings 4. Press "Repair" button. 5. In opened ****** fill fields what you need to repair. 6. Press "OK". micro-USB cable: 1. Phone must be powered on. 2. Type *#7284# and choise phone usb. 3. Type *#197328640#, select: Common - Diag Config - USB diag. 4. Reboot phone. 5. Connect USB cable, install drivers. 6. Select diagnostic port in port settings. 7. Press "Repair" button. 8. In opened ****** fill fields what you need to repair. 9. Press "OK". If you got "Reading security ...error,Security data not found" errors, then you must check "New" in repair options.