We don't Believe in Miracles !! We Believe in our own HardWork !!
Today i am very happy to announce that "We"VolcanoTeam Giving you a Very Fantastic and HOT and World's 1st and Unique update which only we have in the world. Mtk is starting to create High speedQuadCore processors and WE Volcano Team 1st team in the world who support new MTK CPU !!
What is it ?
in MTK Android there is many Partitions in your phone. like Preloader, Recovery, Bootimg etc..... if somehow Preloader get Corrupted then you phone will not able to DETECT WITH PC !!! in other words you will have phone with BOOT DEAD.
How Preloader get corrupted ?
There could be few reasons but main reason could be that someone or you Flash your complete phone (include Preloader) with wrong files or with wrong ver. Also there could be reason someone Delete Preloader or you Deleted.
How could i know my phone have preloader dead ?
Preloader can be dead if some one Flash it wrong and after flash your mobile will not detect with pc any more. for confirm
open device manager
take battery out from phone
insert usb
insert battery
and check is computer detecting any device
If it's not detect then you have phone which Preloader is dead AKA Boot Dead
How can i repair it ?
you have to disassemble your phone and take pcb out. check there should be some Golden points. check these points there should be written on them Rx,Tx,GND,Vcc,Vcharge etc... check there should be written "COLO" or "KOLO" or "KCOLO" you have to Sold that point with GND After Sold Attach usb now your phone will detect with USB !! and now ready to Flash.
In some phones "COLO" or "KOLO" or "KCOLO" not written for those type of phones you have to test all points one by one Short Golden point with GND and attach usb cable which point short with gnd can able to detect your phone by pc is Force Preloader Mode Test Point !! Keep in mind Don't Short Vcc,Vcharge or any other pin which have 4.x Volts also i had tested "Colo" or "Kolo" or "KCOLO" don't have any kind of volts..
So Please share your Researched Force Preloader mode TestPoint Picture with Model ****
Volcano 2.1.2 Far Better Than All Other Chinese Boxes...Hot Summer Going to be TO HOT
what's new ?
World's 1st Support SPD XXX Plan Android oneclick Root(World's First)
Added SPD Android oneclick Root
Added SPD Android Superuser
Added SPD Android Unlock
Added SPD Android Google Lock
Added SPD Android User lock
Added SPD Android Pattern Lock
Improve MTK ROOT
Modify MT6583/89 Read/Write for Better and Correct
Optimize MTK oneclick unlock
World's 1st in Chinese Mobiles Box ADDED Samsung Infineon CPU (TESTED Samsung E2232) (Please test other models and let us know if you found any bug or problem)
World's 1st ADDED MTK Privacy New Arithmetic (TESTED Qmobile E6)
World's 1st Added MTK Privacy code new method
such as Privacy Code read from Qmobile E770 !! Added MTK Android judge whether to ROOT /SU super user (ADB mode). Backup SYSTEM file (requires ROOT permission). Write SYSTEM file (requires ROOT permission).
Read and write SYSTEM file purpose is to repair some deleted APK files accidentally,
VolcanoBox2.1.7 SPD Android Read Info.SAFE Format.SAFE Root.Qmobile E770 &New Privacy
What is new in 2.1.7 SPD Android read info added whether to Format/Root
SPD Android Format added new algo.
SPD Android Root added new algo.
SPD Android SAFE Format added.
SPD Android SAFE ROOT added.
Adjust MTK Android System write.
**No More Hand on logo after format
Privacy Code New ALGO Added.
New Qmobile E770 etc tested !!
VolcanoBox 2.1.8 Verification System for SPD Android &MTK6260 Read/Write/Imei/Privacy
VolcaoBox 2.1.8 Whats new ?
World's 1st Added SPD Android Verification system World's 1st Added SPD Android Verify your phone is Safe for format World's 1st Added SPD Android Verify your phone is Safe for Root World's 1st Added SPD Android Verify your phone is Safe for READ INFO Added MTK 6260 Read Flash Added MTK 6260 Write Flash Added MTK 6260 Imei Repair Added MTK 6260 Read privacy code Adjust MTK Android One-key Root(Solve some phones failed to root) Adjust coolsand Read flash bug Read Instructions VERY CARE FULLY !!
About this Update Please Read very Care Fully before you operate any operation !!
VolcanoBox 2.1.8 Launched world's 1st SPD Android Verify Partitions System. for this Function you can Verify you mobile is SAFE for ROOT or Format or Read info. for this you must have Mobile in Powered ON condition & with Usb Debug mode ON !!. What you have to do it Simply Plug usb cable and click on Partition from Volcano soft and run it. it will tell you is your Phone Supported for SAFE format / ROOT etc or not. If software tell you is safe it will become log in GREEN color and if software tell you is not safe it will show you log in RED color. so here we start...
If software software show you log like this in GREEN COLOR.... This mean your phone is Supported for SAFE Root, format etc..
Code:
Partition as follows. It's supported to format and ROOT the mobile phone.>>mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic) If software show you log like this in RED COLOR.... This mean your phone is NOT supported for SAFE Root, Format etc...
Code:
Partition as follows. It's NOT supported to format and ROOT the mobile phone.>>mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic) How to do it ?
Download & Run 2.1.8
click on SPD
Select 6820
Select One Key Root
Select Partition
untick auto pinout
Plug normal usb cable to mobile in powered on condition
Usb debug must be Enabled
Click on run.
wait few sec it will Show you Logs as i describe above
Q: what is usefull if phone have pattern lock or any other problem and it have not usb debug Enabled then this option is useless how we can do that ?
A: Yes it's true that if phone have pattern lock or any other problem and usb debug not Enabled this function is really useless but infact it's not useless. many time we can't found factory files and many time Same working phone we can get from market so here is hint . Take same working phone, Should be 100% same, plug phone with usb and check is it Safe to format or not. if it's safe then you can do it without any problem and if phone is not safe then you simply don't do. so basically we make this function just to verify is phone is SAFE for format, Root etc or not...
Q: I plug phone but software not recognized or Software hang on "<<" then what to do ?
A: Perform these Steps
MAKE SURE YOUR PHONE IS CONNECTED IN POWERED ON CONDITION AND USB DEBUG ENABLED AND ADB ANDROID DRIVERS ARE INSTALLED AND YOU CAN SEE ADB ANDROID PHONE IN DEVICE MANGER !!!!!!
go to start
go to run
type "CMD"
clck on run
( go to Volcanobox 2.1.8 Folder/Tools ) for exmaple you have Volcano 2.1.8 in C: Drive so you should type this these commands. ( write all command without "" and right after every command you should press Enter button from keyboard)
"C:\" ( Press Enter )
it will become here C:/>
then type "cd VolcanoTool_v2.1.8\tools" ( Press Enter )
it will become here
C:/VolcanoTool_v2.1.8\tools>
then type "adb devices"
now check what it's show to you
if it's show like this
* daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached
C:/VolcanoTool_v2.1.8\tools>
this mean your phone is not detecting by your computer's ADB.exe
if it's show like this
* daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 19761202 device
C:/VolcanoTool_v2.1.8\tools>
This mean your phone is detect by your computer's ADB.exe
Type this command "adb kill-server" ( press enter button ) and again "adb kill-server" ( press enter button )
so here you have to do totally two different ways to work with it.
so we will start
if you phone not detecting by your computer's ADB.exe then you have to do this Keep phone connected
go to ( in ******s Explorer )
C:\********s and Settings\"Your ****"\.android ( Your **** should be your profile **** here for exmaple "Jhon", "Anglina" etc )
there you can see some files check do you have "adb_usb.ini" file in that folder or not
If you have then open it in note pad if not then create new file ****d "adb_usb.ini" and save it.
Be sure you save .INI extension not safe in any other format
for confirm open C: Drive in ******s Explorer go to Tools click on Folder Options click on view Untick Hide extension for known file type click on ok now see that file is exactly "adb_usb.ini" be sure it's not "adb_usb.ini.txt" etc so as you done open it in note pad, ( if you already have this file then don't create new one just open it ) type this in new line and save it "0x1782" ( write without "" ) so after you save file
open CMD again ( which already opened previously )
Type these commands
"adb kill-server" ( press enter button )
and again "adb kill-server" ( press enter button )
now type "adb devices" ( press enter button )
now it should show like this
* daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 19761202 device
C:/VolcanoTool_v2.1.8\tools>
now you are ready to go.
so right after this disconnect phone and connect it again and type these commands
"adb kill-server" ( press enter ) "adb kill-server" ( press enter ) "adb device" ( press enter )
as it's show
* daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 19761202 device
C:/VolcanoTool_v2.1.8\tools>
Keep this CMD open and go to Volcanobox and perform these steps to know is my phone Supported for SAFE format or not !!
click on SPD Select 6820 Select One Key Root Select Partition untick auto pinout click on run now it will show you your phones details in just 1 sec after you can do what ever you want !!
Code:
Partition as follows. It's supported to format and ROOT the mobile phone.>>mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic) so from now no more SPD ANDROID PHONE WILL BECOME DEAD IF YOU VERIFY IT BEFORE FORMAT OR ROOT.... Keep in mind we had tested over 110 phones non of phones become dead while verifying !!
VolcanoBox2.1.9 MTK Android Auto Format,Lot of New SPD Android for Save format & root
PLEASE BUY YOUR VOLCANO BOX ONLY FROM LISTED RESELLER. ELSE VOLCANO TEAM WON'T SUPPORT IT.
PLEASE NOTE THAT GPGINDUSTRIES IS NOT SELLING ANY VOLCANO BOX WITH OUT RX TX CABLES. IF YOUR BOX NOT HAVE THIS CABLE RETURN IT TO YOUR RESELLER.
VolcanoBox 2.1.9
Whats new ?
Adjust SPD Android Read infor Added SPD Android new flash ic Added MTK Android Auto Format (nand+emmc) Adjust SPD Android Root Added LOT of new SPD Android Phones for SAVE Format & Root etc you must verify for save format
How to get verified that my phone is SAFE to FORMAT or ROOT ?
Note Please :
You must use Original GPG Cables with VolcanoBox !! i got some reports from Users that got problem in Box, After Investigate we found They were using NON GPG CABLES so from now whenever you bought Box from any one Please Confirm from him that he is giving you ORIGINAL GPG CABLES WITH VOLCANOBOX !! ELSE We will not Give you any kind of Warranty !! this is happen when you purchase VolcanoBox from NON Official RESELLER, so was a Notice for any one Please keep this in mind cause of FAKE Cables is Cause of HARDWARE Failure !! Thanks you
What's new coming in next upcoming updates ?
( This screen shot Saved during Initial Testing, forget to take Write Flash screen soon i will post more details )
Coming Soon SPD ANDROID READ FULL FLASH ( Almost ready ) Coming Soon SPD ANDROID WRITE FULL FLASH ( Almost ready ) Coming Soon Some SPD Android phones after even write Factory Flash file gave error "cft not calibrate" like Karbonn K1+ Solution ( Almost ready ) Coming Soon Flash file server ( for that we are asking you to must register your box Please Read this thread for more details ) and many other HOT Exclusive Updates are on the way !!
( This is not just Advertisement as i post Successful Read Flash image same like that i will post more details in upcoming updates )
Solved - Server not found
Solved - Invalid License Data
Improved - Communication Speed
Improved - Server Load
How to solve Invalid License Data ?
Click here to download this file
Make it Unrar
Double click on it ( Make sure to run it only 1 or 2 times )
after run Volcanobox
Problem should be Solved !!
How to Solve Box not found in 2.2.1.1 & which was compromised on 2.2.1 & Which was working fine on 2.1.9
VolcanoBox 2.2.2 The King Crusade - Solve CFC Don't Calibrate - ADB mode ROOT & More
VolcanoBox 2.2.2
What's new ?
Added MTK one keyADB mode ROOT
Added One key ADB mode Root for many other Cpu ( BETA
Solution for CFC
Added One key to solve CFC don't calibrate
Added One key for SPD Android to Solve Don't Calibrate
Added new flash Support for Spd Android phones Download Link 1 Download Link 2
VolcanoBox 2.2.3 Knock Out Update - BOOT Increaded - Gmail Account RESET & Much More
VolcanoBox 2.2.3 !! The Ultimate Tool for All kind of Android Phones !!
Whats new ?
۩⇨ MTK Android BOOT Increased to WIPE data and cache
Supported for ROOTED Android Phone
۩⇨ MTK Android Increased a Reset GMAIL Account
Support ROOTED Android Phones & Usb Debug Mode ON
**Without DATA LOSTED
**Supported All Most All Kind of Android Phones
**Such has Original Samsung - HTC Etc
MTK & SPD Phoones are TESTED
۩⇨ MTK Android adjustment su/unlock
Supported Which Phones are ADB ROOT
۩⇨ Adjust MTK Android Write Flash ۩⇨ Optimization of SPD Android format
How to Reset Gmail account ?
Make Sure your phones is rooted & Usb Debug mode on
Go to MTK TAB
Click on One Key-Root
Select Reset-Gmail from Options
Plug phone
Untick Auto pinfind
Tick on Usb mode
Click on run
wait for software will tell you it's done and phone is being Restart
Done !!
What Kind of Phones it's support ?
In Theory All kind Of Android phones Supported Include Original & Chinese too, Such as Samsung, Htc etc from Original phones and MTK, SPD etc ****d Phones
Will i have data lost after reset Gmail ?
We had tested in MTK and SPD no Data Lost
How to reset Gmail account of Original Mobiles ?
Make sure Usb Debug On and Mobile is rooted
Go to MTK TAB
Click on One Key-Root
Select Reset-Gmail from Options
Plug phone
Untick Auto pinfind
Tick on Usb mode
Click on run
wait for software will tell you it's done and phone is being Restart
Done !!
How to reset Gmail account of SPD Phones ?
Make sure Usb Debug On and Mobile is rooted
Go to MTK TAB
Click on One Key-Root
Select Reset-Gmail from Options
Plug phone
Untick Auto pinfind
Tick on Usb mode
Click on run
wait for software will tell you it's done and phone is being Restart
Done !!
Detailed info about Invalid License DATA !!
Let me Tell you, Now VolcanoBox is using Server as you all knows that and we have some data store into your pc via server which is in your Registry, If somehow your Antivirus / Fireware / Malware Detector / or any thing is protecting your ******s will not allow Volcanobox software verify registry keys and results is Invalid license data. there could be some solution of this problem,
Solution # 1
Download this file
Extract it
Run it after Run Volcanobox will be fine
Solution # 2
Download this file
Uninstall Completely Your antivirus/malware detector or any kind of shield
Extract that file
run it
restart pc
redownload 2.2.3 from internet
run it
Solution # 3
Download VolcanoBox 2.1.9
Download this file
Run volcanoBox 2.1.9
go to System
Click on System Self-Test
Click on System Recovery
Extract that file
Run that file
Restart system
Redownload 2.2.3
Extract it
Run it
Solution # 4
Click on start
Click on Turn Off Computer
Click on Turn Off
Insert ******s Cd/DVD
Format ******s ( C Drive or where you install ******s )
Install ******s
Install Drivers
Do not Install any kind of Shield
Download 2.2.3
Run
Invalid License DATA in log ******s !!
Run VolcanoBox 2.2.3
go to System
Click on System Self Test
Click on System Recover
Restart System
Should be ok
Click here to download hotfile Click here to download MediaFire
No more mirror please !!
This ver mayhave problem in rooting
Which phones we tested for Gmail reset is successfuly done without data lost
We will not responsible if somehow your data is deleted !!
World's 1st MTK Root added backup file
(backup format is FlashTool factory file format)
Adjust MTK ADB ROOT
Adjust SPD Andriod Format
(solve some failed after download boot)
SPD Andriod added new flash ic supported
Some Important Notice !!
IF you have any kind of problem like,
Cannot Connect to server.
Invalid License Data.
or any kind of other problem regarding Volcanobox opening,
Please Read this Thread very careFully we had solved Many Problems from Many different users Cannot connect to volcano server
and send email to volcanoteamserver@gmail.com with the log file located inside :
VolcanoBox 2.2.6 World's 1st MTK6251 - MTK6260 added dual & Quad Flash ic & Much more
VolcanoBox 2.2.6 World's 1st MTK6251
* Added MTK 6251 Dual & Quad Flash ic Support ( World's 1st )1
* Added MTK 6260 Dual & Quad Flash ic Support ( World's 1st )1
* Added More Zte Android Phones
(V793, Cloudfone excite 501D, V807, Blade C, T12)
* Added NV Read for SPD Android
* Added NV Write for SPD Android
!! Must do 1st READ INFO after you can Read or Write NV !!
* Added Full Flash Format via one key root
* Added ADB Root for NewerMTK Models
* "Cannot connect to Volcano server" bug fix for Asia server. America server on works.
هذا الموقع يستخدم ملفات تعريف الارتباط (الكوكيز ) للمساعدة في تخصيص المحتوى وتخصيص تجربتك والحفاظ على تسجيل دخولك إذا قمت بالتسجيل.
من خلال الاستمرار في استخدام هذا الموقع، فإنك توافق على استخدامنا لملفات تعريف الارتباط.
