Performed by 2.4.0 Software version.
Please put the phone into Download Mode and connect USB cable.
To put SM-J200H into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.0 Software version.
و من بعد تشغيل الهاتف و نلاحظ ان خاصية adb mode ننتظل تثبيت الدرايفر .
من بعدها نظغط على reset frp
و هذا لوغ العملية
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J200H
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-J200H
Firmware compiled date: Fri Jul 29 13:37:17 KST 2016
PDA version: J200HXXU0APG4
CSC version: J200HOJV0APG2
SW version: J200HXXU0APF1
Phone SN: R21H20S7K9B
Android version: 5.1.1 (LMY48B)
Sales code: EGY
Country: Egypt
HW platform: sc8830
HW Chip: SC7730SE
HW Modem: SC7730SE
Codename: j23gdd
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Backup and reset" and make "Factory data reset"
Performed by 2.4.0 Software version.
و فب الاخير نقوم بفرمتة الهاتف و مبروك عليك
