منقول شرح الخصائص الجديدة فى اصدار Chinese Miracle-2 MTK/Mediatek v1.49

الحالة
مغلق و غير مفتوح للمزيد من الردود.
A

abdjamel

:: Super User ::, ,
إنضم
15 مارس 2012
المشاركات
3,225
مستوى التفاعل
5,044
النقاط
113
السلام عليكم ورحمة الله وبركاته
قام الفريق باضافة ثلاث ميزات جديدة فى الاصدار الاخير
​

اولا_سحب ملف nvram بصيغة bin بشكل تلقائى مع الفلاشة ودا مهم لاستخدامو على البوكسات الاخرى

27983130071087123479.png


54676928703811245912.png



طريقة تفليش هذا الملف عن طريق البوكسات الاخرى معروفة ولا تحتاج شرح
اما استخدامو على cm2 فيرجى عمل الاتى

68484611972747403218.png



اختيار صيغة BIN كما فى الصورة

42159223148118343609.png



30263051646970513158.png



تم كتابة الملف بنجاح كما فى الصورة

يتبع
 
A

abdjamel

:: Super User ::, ,
إنضم
15 مارس 2012
المشاركات
3,225
مستوى التفاعل
5,044
النقاط
113
حجم اقل للفلاشة السكاتر المسحوبة

قام الفريق بالتعديل على عملية سحب الفلاشة السكاتر بما سمح بخفض حجم الفلاشة الى ​
60%​
من حجمها الطبيعى فى بعض الاجهزة

بصراحة انا جربت الموضوع على جهاز ​
htc 626​
لكن الحجم بتاعو تقريبا متغيرش

يعنى الموضوع ليس شغال مع كل الاجهزة وتقريبا الموضوع بيكون انجح على المعالجات الاحدث

​
mt6735 , mt6755 وهكذا

لان حجم الفلاشة المسحوبة من هذه المعالجات بيكون حجمها كبير يصل الى اكثر من 3g

و كدا فرق الحجم بيبان اكتر فيها

وهدى تجربة للفريق على جهاز بمعالج mt6755

كود PHP:
There is more interest example :
v1.48 , MT6755 , read FW :
Code:
Operation : Read Flash [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D4201CF6FA7F613D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x4A2073BA6F5C0D817763FECF6F5C0D81
INT RAM : 0x00040000
EXT RAM : 0x80000000
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Elephone
ProdName : Elephone
ProdModel : P9000_Lite
Device : Elephone
AndroidVer: 6.0
MTKxCPU : MT6755
MTKxPRJ : alps-mp-m0.mp7-V1_even6755.65u.m

[Read Ok] : preloader_c239v55_dx_lite.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3507 MiB
Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__al ps-mp-m0.mp7-V1_even6755.65u.m\

All done!

Done!
Elapsed: 00:07:42
Reconnect Power/Cable!
​


FW Size : 3507 MiB

كود PHP:
v1.49 , MT6755 , read FW :
Code:
Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D4201CF6FA7F613D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x4A2073BA6F5C0D817763FECF6F5C0D81
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Elephone
ProdName : Elephone
ProdModel : P9000_Lite
Device : Elephone
AndroidVer: 6.0
MTKxCPU : MT6755
MTKxPRJ : alps-mp-m0.mp7-V1_even6755.65u.m

[Read Ok] : preloader_c239v55_dx_lite.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1839 MiB
Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__al ps-mp-m0.mp7-V1_even6755.65u.m\

All done!

Done!
Elapsed: 00:08:25
Reconnect Power/Cable!
​



FW Size : 1839 MiB

كود PHP:
Flashing FW, 1.48 , MT6755 :
Code:
Scatter Load Ok , BaseBand : MT6755 , Project : c239v55_dx_lite , Storage : EMMC
Files found : 15 , Set to Flash : 14
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Elephone
Device Model : Elephone
Device CPU : MT6755
Device IntName : Elephone
Device Version : 6.0
Device Compile : 22.04.2016 3:43:56
Device Project : alps-mp-m0.mp7-V1_even6755.65u.m
Device ExtInfo : P9000_Lite
Ready to Flash!

Operation : Flash [ v1.48 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D4201CF6FA7F613D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x4A2073BA6F5C0D817763FECF6F5C0D81
INT RAM : 0x00040000
EXT RAM : 0x80000000
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : c239v55_dx_lite , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT ...
Update Primary ...
Update Mirror ...
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000001A80000
Erase : 0x0000000001BC8000-0x0000000004000000
Erase : 0x0000000007000000-0x0000000001000000
Erase : 0x0000000008300000-0x0000000002400000
Erase : 0x000000000AC00000-0x000000073BFFBE00
Flash Erase Done, time used : 00:00:04

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Ok
Flash Partition : MD1IMG
Image Flash Ok
Flash Partition : MD1DSP
Image Flash Ok
Flash Partition : MD1ARM7
Image Flash Ok
Flash Partition : LK
Image Flash Ok
Flash Partition : LK2
Image Flash Ok
Flash Partition : BOOT
Image Flash Ok
Flash Partition : LOGO
Image Flash Ok
Flash Partition : TEE1
Image Flash Ok
Flash Partition : TEE2
Image Flash Ok
Flash Partition : SECRO
Image Flash Ok
Flash Partition : SYSTEM
Image Flash Ok
Flash Partition : CACHE
Image Flash Ok
Flash Partition : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:02:33


Done!
Elapsed: 00:02:49
Reconnect Power/Cable!
​

Elapsed: 00:02:49
كود PHP:
Flashing FW, 1.49 , MT6755 :
Code:
Scatter Load Ok , BaseBand : MT6755 , Project : c239v55_dx_lite , Storage : EMMC
Files found : 15 , Set to Flash : 14
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Elephone
Device Model : Elephone
Device CPU : MT6755
Device IntName : Elephone
Device Version : 6.0
Device Compile : 22.04.2016 3:43:56
Device Project : alps-mp-m0.mp7-V1_even6755.65u.m
Device ExtInfo : P9000_Lite
Ready to Flash!

Operation : Flash [ v1.49 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D4201CF6FA7F613D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x4A2073BA6F5C0D817763FECF6F5C0D81
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : c239v55_dx_lite , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT ...
Update Primary ...
Update Mirror ...
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000001A80000
Erase : 0x0000000001BC8000-0x0000000004000000
Erase : 0x0000000007000000-0x0000000001000000
Erase : 0x0000000008300000-0x0000000002400000
Erase : 0x000000000AC00000-0x000000073BFFBE00
Flash Erase Done, time used : 00:00:09

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Ok
Flash Partition : MD1IMG
Image Flash Ok
Flash Partition : MD1DSP
Image Flash Ok
Flash Partition : MD1ARM7
Image Flash Ok
Flash Partition : LK
Image Flash Ok
Flash Partition : LK2
Image Flash Ok
Flash Partition : BOOT
Image Flash Ok
Flash Partition : LOGO
Image Flash Ok
Flash Partition : TEE1
Image Flash Ok
Flash Partition : TEE2
Image Flash Ok
Flash Partition : SECRO
Image Flash Ok
Flash Partition : SYSTEM
Image Flash Ok
Flash Partition : CACHE
Image Flash Ok
Flash Partition : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:01:03


Done!
Elapsed: 00:01:19
Reconnect Power/Cable!
​

Elapsed: 00:01:19


وكما تشاهدونن فرق جامد فى خفض الحجم وهدا هيفدنا فى رفع الفلاشة وكدا التخزين على الهارد
لكن الى اهم من دالك ان الفريق اكد ان الفلاشة المسحوبة كاملة وفعالة وهى اقرب للفلاشة الاصلية من اى وقت مضى

-----------------------------

هدى الاضافات المهمة والجديدة ويبقى بعض الاضافات الاخرى

--------------

دعم اكثر لاجهزة nand flash

وعلاج بعض الاخطاء

------------------

تم بعون الله


منقول ( للامانة )
 
التعديل الأخير:
A

Abu Adam

:: Super User::, ,
إنضم
18 يناير 2013
المشاركات
1,465
مستوى التفاعل
2,642
النقاط
113
بارك الله فيك اخي
 
GsmServe

GsmServe

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
22 مايو 2013
المشاركات
1,628
مستوى التفاعل
4,905
النقاط
113
الإقامة
Ainazel Setif Algeria
يا راجل على الاقل اكتب منقول للامانة او منقول لتعم الفائدة ( رائحة اللهجة المصرية تطغى على المكان )
 
الحالة
مغلق و غير مفتوح للمزيد من الردود.
أعلى